Tailonz Pneumatic 3-Ways - 10mm Tube OD Push to Connect Tube Quick Fittings Push Lock PE-10 (Pack of 2)

【Product Name】 Pneumatic 3-Ways Push to Connect Fittings

【Materia】Plastic

【Size】10mm OD

【Maximum Range】145 Psi【 Working Temperature】32～140°F

【Features】The Connector is Easy to Install and Widely Applicable

number:

size:

10mm

Retail Price: $ 5.99

Wholesale Price: Inquire Now

Product Feature

High Strength, Wear Resistance, Corrosion Resistance, High Density, Not Easy to Burst.
The product is Sturdy and Durable and Has a Long Service Life.
Easy installation and disassembly, good sealing performance.
It Can be Used for The Connection of pipes and The Use of Different Pneumatic Components, and Has a Wide Range of Uses.
You Can Easily Insert or Pull out the Trachea Without Any Tools
The Clip of Connecting Air Pipe is Made of Strong Plastic Material, Which is Not Easy to Fall off After Connection Adopt Sealing Component, Keep Good Sealing, Not Easy to Leak.
Each Fitting Contains the Sealing Glue, No Need Teflon Tape, Easy to Use.

Directions for use!

Do Not Exceed 145Psi Pressure
Do Not Use the Product Outside the Temperature Range
Do Not Use in Places with Too Much Dust or Particles
Do Not Use Any Medium Other Than Air. the Product is Limited to Air or Vacuum Environment.
After Completing the Connection, Please Gently Pull the Tube with Your Hand to Make Sure That It is Completely Connected Without Falling Off.
Please Ensure That the Cross Section of the Trachea is Perpendicular to the Trachea (as Shown in the Figure)
Do Not Work Under Additional Load (bending, Twisting, Pulling, Etc.) Except Air Pressure.
when Inserting the Tube, Please Insert the Tube into the Bottom Before Use

In Order to Prevent Leakage, Please Pay Attention to the Above Matters.

The Story Of Tailonz Pneumatic

Tailonz Pneumatic Professional Production of Pneumatic Parts, Air Filters, Solenoid Valves, Pneumatic Pipelines and Other Pneumatic Components.

We Develop Tools and Products for Ourselves and Our Customers Based on Actual Needs and Expectations.

All Products Are Directly Produced from the Factory to the Warehouse, We Ensure That Every Link, Every Process.

Thank You for Your Trust.

10mm OD Pneumatic 3-Ways Push to Connect Fittings

Product Parameter

Product Name:Pneumatic 3-Ways Push to Connect Fittings
Size: 10mm OD
Material: Plastic
Shape: Tee
Pressure Range: 0 ~ 145Psi
Operating Temperature Range: 32° F to 140 ° F
Medium:Only Air
Features:The Connector is Easy to Install and Widely Applicable

2 × 10mm OD Pneumatic 3-Ways Push to Connect Fittings


It Can Rotate 360° Simple And Dexterous,Convenient installation.The Tube Can Rotate 360° Even After Installation.not Easy To Leak, Good Sealing Performance, Long Service Life.	High Pressure And Not Easy To Trip The Product Has Undergone Multiple Stress Tests And Can Withstand Up To 145psi Without Tripping.not Easy To Leak, Good Sealing Performance, Long Service Life.	High Quality High Strength Plastics High Strength Plastic Material,not Easy To Deformation, Not Easy To Rust, Fine Surface Treatment, No Burr, Durable.the Release Ring Adopts The Oval Design, Which Is More Convenient For Disassembly.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Tailonz Pneumatic 3-Ways - 10mm Tube OD Push to Connect Tube Quick Fittings Push Lock PE-10 (Pack of 2)

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Product Feature

High Strength, Wear Resistance, Corrosion Resistance, High Density, Not Easy to Burst.
The product is Sturdy and Durable and Has a Long Service Life.
Easy installation and disassembly, good sealing performance.
It Can be Used for The Connection of pipes and The Use of Different Pneumatic Components, and Has a Wide Range of Uses.
You Can Easily Insert or Pull out the Trachea Without Any Tools
The Clip of Connecting Air Pipe is Made of Strong Plastic Material, Which is Not Easy to Fall off After Connection Adopt Sealing Component, Keep Good Sealing, Not Easy to Leak.
Each Fitting Contains the Sealing Glue, No Need Teflon Tape, Easy to Use.

Directions for use!

Do Not Exceed 145Psi Pressure
Do Not Use the Product Outside the Temperature Range
Do Not Use in Places with Too Much Dust or Particles
Do Not Use Any Medium Other Than Air. the Product is Limited to Air or Vacuum Environment.
After Completing the Connection, Please Gently Pull the Tube with Your Hand to Make Sure That It is Completely Connected Without Falling Off.
Please Ensure That the Cross Section of the Trachea is Perpendicular to the Trachea (as Shown in the Figure)
Do Not Work Under Additional Load (bending, Twisting, Pulling, Etc.) Except Air Pressure.
when Inserting the Tube, Please Insert the Tube into the Bottom Before Use

In Order to Prevent Leakage, Please Pay Attention to the Above Matters.

The Story Of Tailonz Pneumatic

Tailonz Pneumatic Professional Production of Pneumatic Parts, Air Filters, Solenoid Valves, Pneumatic Pipelines and Other Pneumatic Components.

We Develop Tools and Products for Ourselves and Our Customers Based on Actual Needs and Expectations.

All Products Are Directly Produced from the Factory to the Warehouse, We Ensure That Every Link, Every Process.

Thank You for Your Trust.

10mm OD Pneumatic 3-Ways Push to Connect Fittings

Product Parameter

Product Name:Pneumatic 3-Ways Push to Connect Fittings
Size: 10mm OD
Material: Plastic
Shape: Tee
Pressure Range: 0 ~ 145Psi
Operating Temperature Range: 32° F to 140 ° F
Medium:Only Air
Features:The Connector is Easy to Install and Widely Applicable

2 × 10mm OD Pneumatic 3-Ways Push to Connect Fittings


It Can Rotate 360° Simple And Dexterous,Convenient installation.The Tube Can Rotate 360° Even After Installation.not Easy To Leak, Good Sealing Performance, Long Service Life.	High Pressure And Not Easy To Trip The Product Has Undergone Multiple Stress Tests And Can Withstand Up To 145psi Without Tripping.not Easy To Leak, Good Sealing Performance, Long Service Life.	High Quality High Strength Plastics High Strength Plastic Material,not Easy To Deformation, Not Easy To Rust, Fine Surface Treatment, No Burr, Durable.the Release Ring Adopts The Oval Design, Which Is More Convenient For Disassembly.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.