Easy to install 1

1. Connect X50 Plus with USB cable, and put X50 Plus in the front windshield

Easy to install 3

3. Wait for a minute, and X50 Plus will automatically power on

Water temperature gauge

F (Fahrenheit degree)

Speedometer

Km/H

OBD Diagnose

Electronically Controlled Diagnosis System

Fault code scanning functions to read car fault code information and choose whether to clear car faults.read data streams to detect car data in real time.

Car performance tests include: acceleration performance tests, brake performance tests, acceleration target speeds, and initial braking speeds，When an acceleration performance test is carried out, set up an acceleration target speed firstly, and finish the acceleration performance test after the set speed is reached. When the brake performance test is undertaken, it is necessary to set up an initial braking speed firstly; when the initial brake speed is reached, start to calculate the brake distance until the car speed is stopped

Instrument parameter settings include 1

1.Engine displacement settings- Set up the engine displacement size, after this parameter is set, the car's instantaneous fuel consumption and average fuel consumption are accurately calculated.

2.Fuel type setting-

Choose petro, diese1, diesel 2; in different diesel modes, fuel consumption data sees great changes.

3.Overspeed alarm- Set up this parameter, when the set car speed is reached, the instrument will send “drop, drop” sounds to give an alarm, the car speed text will display in red.

4.High water temperature alarm- Set up this parameter, when the engine reaches the alarm temperature instrument, “drop, and drop” sounds will be given, at the same time the displayed temperature character is red.

5.Shift reminding rotation speed - After this rotation speed is set, shift reminding status is reached, and a shift prompt tone will be sent, at the same time , shift characters display

Instrument parameter settings include 3

7.Instrument standby time-After the car flames out, the set value is reached, and X50 Plus will sleep automatically.

8.Car speed error correction- When the car speed meter displays 100 km/miles status, adjust X50 Plus display to be in accordance with the car speed meter. IF X50 PLUS shows 100km/h, the car speed shows 107km/h, then change the 100% parameter to 107% is ok

Instrument parameter settings include 5

11.Instrument digit color -Seven colors are available for option, users can carry out settings based on their preference.

12.Car speed reset settings-In idle modes, if the car speed is lower than the set value, the car speed will be displayed as zero.

13.Fuel consumption data correction- If there is an error between average fuel consumption displayed in X50 Plus and actual fuel consumption, adjust this parameter. If the displayed fuel consumption is bigger than the actual one, decrease the percentage, otherwise increase the percentage.

14.Factory reset settings-Choose this function to restore X50 Plus data to initial status.