- 1.Iron quality, not easy to dump, the use of stability, compared with the old models, there is a great improvement in quality, basically solve all the problems of the old models,with a certain quality superiority.
- 2.Double paint, finish luster, rust effect is good, the appearance of fine Transformer internal use of pure copper coil, wire thick, compared to other products, aluminum wire, copper long life, reduce heat and work loss
- 3.Silicon steel sheet with high silicon content of the material, increase the permeability, effectively reduce the core loss and magnetic aging, silicon steel surface rust coating, increase the service life and stability
- 4.Can be used to seal kel-F, Mylar, polyflex, P.V.A, polyethylene, polyurethane, polyvinylchloride, polypropylene, pliofilm, tivac, saranimpluse
- 5.What You Get: 8\" impulse sealer, 1 extra heat seal strip, welcome guide,Feel free to contact us with any questions.
.
.
Uses and Tips for Optimal Results:
|
|
|
|
|
|---|---|---|---|
Step 1Plug into the power |
Step 2According to the thickness of bags, adjust the sealing timer to 1-8; and level 3 is enough for most bags; Thicker the bag, higher the level required. |
Step 3No warmup time needed, put the bag on the machine flat. |
Step 4Impulse the press part for sealing; When the signal light is off automatically, keeping the handle pressed down for a few seconds would get optimal results. |
NOTICES：
Package Contents:
Impulse heat sealer x1
Extra sealing elements x2
Instruction manual x1
Screwdriver x1
NOTICES：
NOTICES：
>Do not use the machine if the power cord or plug is damaged or has malfunctioned.
>Do not touch the heating area by your hands during work. This machine is only for indoor use.
>The sealing surface should be kept free of foreign matter to avoid oxidation, which will affect the machine usage life.
>Do not wipe the sealing surface with a damp cloth.
- >When replacing the heating wire, please choose the same specifications as the original one.
- >After long time use, please check the lower Silicon Strip, damage which will affect the quality of bag sealing.
|
|
|
|
|
|---|---|---|---|---|
| IW0208 | IW0212 | IW0208P | IW0212P | |
| Source | 110v/60hz | 110v/60hz | - | - |
| Power | 200～300w | 300～400w | - | - |
| Dimensions | 13x3.4x6.4inch | 17.5x3.7x6.6inch | - | - |
| Sealing Width: | 2mm | 2mm | 2mm | 2mm |
| Sealing Length: | 8inch | 12inch | 220mm | 325mm |
| Heat Sealable Material Bags: | Foil, Mylar, Chip, Cellophane, Snack, Tea, Polyester, Nylon Polymers and All Other Heat Sealable Plastic Bags | Foil, Mylar, Chip, Cellophane, Snack, Tea, Polyester, Nylon Polymers and All Other Heat Sealable Plastic Bags | Foil, Mylar, Chip, Cellophane, Snack, Tea, Polyester, Nylon Polymers and All Other Heat Sealable Plastic Bags | Foil, Mylar, Chip, Cellophane, Snack, Tea, Polyester, Nylon Polymers and All Other Heat Sealable Plastic Bags |
| Package Includes: | 8inch Impulse heat sealer x1， Extra sealing elements x2， Instruction manual x1， Screwdriver x1 | 12inch Impulse heat sealer x1， Extra sealing elements x2， Instruction manual x1， Screwdriver x1 | 8inch Heat Seal Strips X 6 | 12inch Heat Seal Strips X 6 |
BEST SELLERS
Product Description
.
.
Uses and Tips for Optimal Results:
|
|
|
|
|
|---|---|---|---|
Step 1Plug into the power |
Step 2According to the thickness of bags, adjust the sealing timer to 1-8; and level 3 is enough for most bags; Thicker the bag, higher the level required. |
Step 3No warmup time needed, put the bag on the machine flat. |
Step 4Impulse the press part for sealing; When the signal light is off automatically, keeping the handle pressed down for a few seconds would get optimal results. |
NOTICES：
Package Contents:
Impulse heat sealer x1
Extra sealing elements x2
Instruction manual x1
Screwdriver x1
NOTICES：
NOTICES：
>Do not use the machine if the power cord or plug is damaged or has malfunctioned.
>Do not touch the heating area by your hands during work. This machine is only for indoor use.
>The sealing surface should be kept free of foreign matter to avoid oxidation, which will affect the machine usage life.
>Do not wipe the sealing surface with a damp cloth.
- >When replacing the heating wire, please choose the same specifications as the original one.
- >After long time use, please check the lower Silicon Strip, damage which will affect the quality of bag sealing.
|
|
|
|
|
|
|---|---|---|---|---|
| IW0208 | IW0212 | IW0208P | IW0212P | |
| Source | 110v/60hz | 110v/60hz | - | - |
| Power | 200～300w | 300～400w | - | - |
| Dimensions | 13x3.4x6.4inch | 17.5x3.7x6.6inch | - | - |
| Sealing Width: | 2mm | 2mm | 2mm | 2mm |
| Sealing Length: | 8inch | 12inch | 220mm | 325mm |
| Heat Sealable Material Bags: | Foil, Mylar, Chip, Cellophane, Snack, Tea, Polyester, Nylon Polymers and All Other Heat Sealable Plastic Bags | Foil, Mylar, Chip, Cellophane, Snack, Tea, Polyester, Nylon Polymers and All Other Heat Sealable Plastic Bags | Foil, Mylar, Chip, Cellophane, Snack, Tea, Polyester, Nylon Polymers and All Other Heat Sealable Plastic Bags | Foil, Mylar, Chip, Cellophane, Snack, Tea, Polyester, Nylon Polymers and All Other Heat Sealable Plastic Bags |
| Package Includes: | 8inch Impulse heat sealer x1， Extra sealing elements x2， Instruction manual x1， Screwdriver x1 | 12inch Impulse heat sealer x1， Extra sealing elements x2， Instruction manual x1， Screwdriver x1 | 8inch Heat Seal Strips X 6 | 12inch Heat Seal Strips X 6 |
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
