GLOTRENDS 2 in 1 M.2 SATA to USB C 3.1 and USB A Adapter Enclosure for M.2 SATA SSD(Key B/B+M),Trim UASP S.M.A.R.T Support (M2AC)

Work with M.2 SATA SSD (Key B/B+M), apply to 2242/2260/2280mm. Not Support M.2 NVME/AHCI SSD

2 in 1 Innovative Design: USB-C 3.1 port up to 10Gbps (compatible with thunberbolt 3), USB-A 3.0 up to 5Gbps.

VL 716 chip, TRIM and UASP support; Compatible with Windows/Mac/Linux/XBOX/PS4, easy to setup, no driver required.

Work with M.2 SATA SSD (Key B/B+M), such Samsung 860 EVO/850 EVO/Crucial MX500/Crucial MX300/WD Blue 3D NAND, etc.

Warranty : 12 Month Warranty and 3 Month Replacement Warranty, Support email Response within 24 Hours

Retail Price: $ 0.14

Wholesale Price: Inquire Now

2 in 1 M.2 SATA to USB-C/USB-A Adapter Enclosure

Support M.2 SATA SSD(Key B/B+M)
Not support M.2 PCIE NVME SSD (Key M)
Support 2 Form Factor: 2230/2242/2260/2280mm
USB-C 3.1 GEN 2 interface, up to 10Gbps (make sure your PC/laptop is USB-C 3.1 interface), compatible with thunderbolt 3 (only reach 10Gbps at most)
USB-A 3.0 Interface, up to 5Gbps
Aluminum shell for heat dissipation
Silicone protection case for port protection, Anti-collision, dust-proof
Screw installation
LED indicates the status of the SSD
Support TRIM and UASP
Compatible with Windows/Mac/Linux, Plug and Play, No Driver needed
2x10 pieces of Heat-conducting Silica Gel Pad for heat dissipation


Support M.2 SATA SSD Work with M.2 SATA SSD (Key B/B+M), such Samsung 860 EVO/850 EVO/Crucial MX500/Crucial MX300/WD Blue 3D NAND, etc.	2 in 1 Design USB-C 3.1 port, up to 10Gbps speed; USB-A 3.0 port, up to 5Gbps speed.	VL 716 Chip VL716 is a high performance, low power single chip USB 3.1 to SATA 6Gb/s bridge controller with USB type-C connector USB Attached SCSI Protocol (UASP) Supporting USB mass storage class Bulk-Only Transport (BOT)	Conditions of TRIM SSD TRIM-enabled SSD performance does not degrade in long time use, and keeps it (nearly) as fast as new. TRIM-enabled commend only work under windows, not support Mac OS; SSD support TRIM-enabled commend. To be noted: TRIM only works under NTFS, no FAT 32.


Installation (1) Remove the protective film of 10 small square silica gel pad Put the small square silica gel pad on the surface of SSD chip/flash Insert SSD into PCB board Fix the SSD to PCB board with screw	Installation (2) Secure the case with 4 screws as picture shown Put on silicone protection case	CD Screw High quality CD screw ensure repeated screw/unscrew operation. In order to improve product quality, we pay attention to every detail.	Accessories 4 screws for case securing screw kits for PCB board securing 2x10 pieces of square Heat-conducting Silica Gel Pad

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

GLOTRENDS 2 in 1 M.2 SATA to USB C 3.1 and USB A Adapter Enclosure for M.2 SATA SSD(Key B/B+M),Trim UASP S.M.A.R.T Support (M2AC)

BEST SELLERS

Product introduction

Shipping Notices

Product Description

2 in 1 M.2 SATA to USB-C/USB-A Adapter Enclosure

Support M.2 SATA SSD(Key B/B+M)
Not support M.2 PCIE NVME SSD (Key M)
Support 2 Form Factor: 2230/2242/2260/2280mm
USB-C 3.1 GEN 2 interface, up to 10Gbps (make sure your PC/laptop is USB-C 3.1 interface), compatible with thunderbolt 3 (only reach 10Gbps at most)
USB-A 3.0 Interface, up to 5Gbps
Aluminum shell for heat dissipation
Silicone protection case for port protection, Anti-collision, dust-proof
Screw installation
LED indicates the status of the SSD
Support TRIM and UASP
Compatible with Windows/Mac/Linux, Plug and Play, No Driver needed
2x10 pieces of Heat-conducting Silica Gel Pad for heat dissipation


Support M.2 SATA SSD Work with M.2 SATA SSD (Key B/B+M), such Samsung 860 EVO/850 EVO/Crucial MX500/Crucial MX300/WD Blue 3D NAND, etc.	2 in 1 Design USB-C 3.1 port, up to 10Gbps speed; USB-A 3.0 port, up to 5Gbps speed.	VL 716 Chip VL716 is a high performance, low power single chip USB 3.1 to SATA 6Gb/s bridge controller with USB type-C connector USB Attached SCSI Protocol (UASP) Supporting USB mass storage class Bulk-Only Transport (BOT)	Conditions of TRIM SSD TRIM-enabled SSD performance does not degrade in long time use, and keeps it (nearly) as fast as new. TRIM-enabled commend only work under windows, not support Mac OS; SSD support TRIM-enabled commend. To be noted: TRIM only works under NTFS, no FAT 32.


Installation (1) Remove the protective film of 10 small square silica gel pad Put the small square silica gel pad on the surface of SSD chip/flash Insert SSD into PCB board Fix the SSD to PCB board with screw	Installation (2) Secure the case with 4 screws as picture shown Put on silicone protection case	CD Screw High quality CD screw ensure repeated screw/unscrew operation. In order to improve product quality, we pay attention to every detail.	Accessories 4 screws for case securing screw kits for PCB board securing 2x10 pieces of square Heat-conducting Silica Gel Pad

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.