Chief TCR Rephasing Tie-Rod Cylinder: 3.25 Bore x 10 Stroke - 1.25 Rod Dia for Double Acting #8 SAE Port Retracted 22.25" and Extended Length 32.25" and 1 Pin Dia 216035

Chief TCR Rephasing Tie-Rod Cylinder

3.25 Bore x 10 Stroke

3000 PSI

1.25 Rod Diameter

216035

Retail Price: $ 222.31

Wholesale Price: Inquire Now

Hydraulic Cylinders

Cylinders allow hydraulic systems to apply linear motion and force without mechanical gears or levers by transferring the pressure from fluid through a piston to the point of operation.
Welded cylinders are designed for most applications and are more complex in design but are generally more difficult to repair due to the welded design. Welded cylinders are typically a better solution due to their compact design and when a more robust design is important in an application.

Hydraulic Cylinders Inside:

· The hydraulic cylinder consists of a cylinder barrel, in which a piston connected to a piston rod moves back and forth. ... The piston has sliding rings and seals.
· The piston divides the inside of the cylinder into two chambers, the bottom chamber (cap end) and the piston rod side chamber (rod end / head end).

The Chief TCR is the premier rephasing tie-rod cylinder design, ideal for construction and agricultural applications where you need to lift independent loads plumbed in series.
Need to lift two or more Cylinders plumbed in series, with bore and rod diameters sized to ensure all rods extend or retract equally? These are designed for you!
In addition, these Cylinders combine the functions of flow dividing components with that of actuators saving space and weight. The base end clevis extends out 2 inches to ensure greater swing radius and Maximum flexibility.
Need more? The Cylinders have SAE O-ring ports that allow for easy hookup. Every Chief TCR cylinder is functionally tested and pressurized to 1.5 times the normal working pressure to ensure performance reliability.
Cylinders can be customized to meet OEM requirements and stroke lengths. Painted black.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Chief TCR Rephasing Tie-Rod Cylinder: 3.25 Bore x 10 Stroke - 1.25 Rod Dia for Double Acting #8 SAE Port Retracted 22.25" and Extended Length 32.25" and 1 Pin Dia 216035

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Hydraulic Cylinders

Cylinders allow hydraulic systems to apply linear motion and force without mechanical gears or levers by transferring the pressure from fluid through a piston to the point of operation.
Welded cylinders are designed for most applications and are more complex in design but are generally more difficult to repair due to the welded design. Welded cylinders are typically a better solution due to their compact design and when a more robust design is important in an application.

Hydraulic Cylinders Inside:

· The hydraulic cylinder consists of a cylinder barrel, in which a piston connected to a piston rod moves back and forth. ... The piston has sliding rings and seals.
· The piston divides the inside of the cylinder into two chambers, the bottom chamber (cap end) and the piston rod side chamber (rod end / head end).

The Chief TCR is the premier rephasing tie-rod cylinder design, ideal for construction and agricultural applications where you need to lift independent loads plumbed in series.
Need to lift two or more Cylinders plumbed in series, with bore and rod diameters sized to ensure all rods extend or retract equally? These are designed for you!
In addition, these Cylinders combine the functions of flow dividing components with that of actuators saving space and weight. The base end clevis extends out 2 inches to ensure greater swing radius and Maximum flexibility.
Need more? The Cylinders have SAE O-ring ports that allow for easy hookup. Every Chief TCR cylinder is functionally tested and pressurized to 1.5 times the normal working pressure to ensure performance reliability.
Cylinders can be customized to meet OEM requirements and stroke lengths. Painted black.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.