Your Way for Tea Brewing / Fruit Water

The inspiration comes from China traditional KongFu tea. The Twist Open / Close Stopper connects Top Glass Tea Brewing Chamber and Double Walled Glass Bottle. The tea brewing chamber is totally independent if you twist in closed position. Therefore, you can make your best aroma tea by controlling steeping time and concentration. No more bitter tea from the day forward. It also allow multiple brewing if you like light tea. Removing tea residual from brewing chamber, you will find another versatile funtion of it as a small glass tea cup for multiple serve.

Double Wall Vacuum Insulated Technology keeps your tea or beverages hot and cold for hours

How to Brew Your Tea

• Unscrew top glass tea brewing chamber and put in tea leaves ( Note: Top glass chamber is single walled. Be careful to touch when handling hot brewing )
• Securely fasten tea chamber with close / open stopper part
• Add hot water in double walled glass bottle and securely fasten with close / open parts
• Put the bottle up side down and twist counter clockwise to open the stopper parts for water coming into tea chamber for tea brewing
• Turn back the bottle in erect position and let tea and leaf separate. Then twist counter clockwise to close the stopper
• Unscrew the whole lid and enjoy your tea hours OR take off top glass chamber and then remove residual and take top glass as a small drinking cup for multiple serve

How to Detach The Stopper for Thorough Clean

• STEP 1 Turn the stopper upside down; Make sure to twist stopper part [G] clockwise on the [OPEN POSITION]
• STEP 2 Detach part [A] by twist counter clockwise ( Make sure the stopper twist on the [OPEN POSITON] and the [ARROW SIGN] sign should be line up with the [SLOT SIGN] when assembling )
• STEP 3 Detach Part [B] after removing part [A]
• STEP 4 Detach slicone ring part [C] by pulling out and then get stainless steel filter part [D]
• STEP 5 Detach stainless steel ball part [E] by pushing downwards
• STEP 6 Detach silicone part [F] by pushing downwards
• STEP 7 Separate part [G] and part [H] by twist and pulling downwards and get part [I] by pulling out

Do’s & Don’ts

• Hand wash the bottle for first use.
• Contents should not be left in the container for longer than 24 hours
• Hand washing only
• Each part is detachable for thorough clean, check parts assembled in right place before the each use
• Never use a microwave, conventional oven, or other heat source for this purpose