Flowline LV20-1201 Switch-Tek Mini-Float Level Switch for Vertical Mounting, Polypropylene Sensor, 1/8" NPT Process Mount
Flowline LV20-1201 Switch-Tek Mini-Float Level Switch for Vertical Mounting, Polypropylene Sensor, 1/8" NPT Process Mount
  • Mini-float level switch with polypropylene sensor mounts vertically inside tanks to detect the level of clean water and chemical solutions
  • Float can be oriented to indicate either a high or low liquid level
  • Dry-contact reed switch output that can be wired directly to a PLC, SCADA, or other controller for monitoring
  • 1/8\" male NPT process mount and 2' long, two-conductor wire for making connections
  • Sensor is certified IP68 for protection against dust and immersion under pressure
Retail Price: $ 25.13
Wholesale Price: Inquire Now
...
Flowline LV20-1201 Switch-Tek Mini-Float Level Switch for Vertical Mounting, Polypropylene Sensor, 1/8" NPT Process Mount
Flowline LV20-1201 Switch-Tek Mini-Float Level Switch for Vertical Mounting, Polypropylene Sensor, 1/8" NPT Process Mount

BEST SELLERS

...
The Flowline LV20-1201 Switch-Tek Mini-Float Level Switch with polypropylene sensor mounts vertically inside tanks to detect the level of clean water and chemical solutions, and the float can be oriented to indicate either a high or low liquid level. The switch has a dry-contact reed switch output that can be wired directly to a PLC (programmable logic controller), SCADA (supervisory control and data acquisition), or other controller for monitoring. While the switch functions best in the vertical position, it can operate in most liquids with the stem at up to a 20-degree angle from vertical. It has a 1/8" male NPT process mount and a 2' long, two-conductor, PVC-jacketed wire for making connections. The sensor is Ingress Protection certified IP68 for protection against dust and immersion under pressure. Float-level switches are commonly used in manufacturing and water-treatment applications.

The Flowline LV20-1201 Switch-Tek Mini-Float Level Switch with polypropylene sensor mounts vertically inside tanks to detect the level of clean water and chemical solutions, and the float can be oriented to indicate either a high or low liquid level. The switch has a dry-contact reed switch output that can be wired directly to a PLC (programmable logic controller), SCADA (supervisory control and data acquisition), or other controller for monitoring. While the switch functions best in the vertical position, it can operate in most liquids with the stem at up to a 20-degree angle from vertical. It has a 1/8" male NPT process mount and a 2' long, two-conductor, PVC-jacketed wire for making connections. The sensor is Ingress Protection certified IP68 for protection against dust and immersion under pressure. Float-level switches are commonly used in manufacturing and water-treatment applications.

Specifications
Accuracy+ or – 5mm in water
Repeatability+ or – 2mm in water
Specific gravity0.8 minimum
Contact typeSPST reed switch
Contact rating120VAC/VDC at 50VA
Contact outputSelectable NO (normally open)/NC (normally closed)
Process temperature– 40 to +80 degrees C/– 40 to +176 degrees F
Maximum pressure10 psi/0.7 bar
Standards metCE (European Conformity ) marking
Dimensions (including process mount)58 x 20mm/2.3 x 0.8 inches (length x diameter)

Flowline manufactures measurement and control instrumentation for chemical, water, and wastewater applications. The company, founded in 1990, is headquartered in Los Alamitos, CA.

Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
... ... ...
Liquid,cream or cosmetics items are quantity limited in shopping agent service
... ... ...
Chinese medicine is limited to ship by Chinese exporting goods.
...
2 Limitation for different shipping methods:
...
3 Yoybuy Product's Label:
...
Sensitive Product(SEN)
...
Product With battery
...
Cream
...
Powder
...
Dangerous Products
...
....
4 Volume weight Requested:
...
volume weight=length*height*Width/5000
...
one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；
...
...
...
...
...
Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.
After Sale Service:
2 The rules apply and summit for receive compensation
3 The conditions of accrual for amount insurance
3 The conditions of accrual for amount insurance
5 Damage to the parcel during international shipping, which resulted in damage to the goods in it
6 Loss of individual goods under international shipment The absence individual goods in the parcel
7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment
...

BEST SELLERS

Inquire Now
X

Contact us now

Language

Currency

    Upload image to find the same item

    Drag the image here, or Click to upload Tips: Only jpg, jpeg, png, webp

    Scan the QR code and use your phone to take a direct photo search.

    ×