4 Pack Battery Operated Smoke Detector & Fire Alarm with Photoelectric Sensor,Easy to Install with Test Button

Retail Price: $ 32.99

Wholesale Price: Inquire Now

PHOTOELECTRIC SMOKE ALARM IS FAR MORE SENSITIVE AND EFFECTIVE THAN IONIZATION SMOKE ALARM

How does Photoelectric Smoke alarm works?

Inside the smoke alarm, there is a LED light that sends a beam of light (similar to a laser pointer) in a separate compartment inside the chamber, there is a photosensor that detects light.
As smoke enters the detector, the smoke particles interrupt the light beam, scattering it in many directions. Some of the LED light scatters toward the light sensor. When light beams hit the sensor, the alarm will go off!
When the batteries in your smoke alarm get low, the smoke alarm automatically activates a low battery chirping sound different from the alarm sound so you know it's time to get new batteries.

Photoelectric sensors are set off when smoke enters the alarm and deflects the light of an LED beam onto a photocell.
For slow, smoky, smoldering fires, photoelectric alarms are far more sensitive and effective.
Choose a photoelectric model as our primary choice, killing the fire at the begining.

Installation Notes：

1. Turn the alarm body counterclockwise and take off the bracket.

2. Hold the bracket in the installation position as specified in the Recommended Locations, mark installation holes of the bracket with a pencil.

3. Drill the two marked installation holes with a 3/16 inch (5mm) drill bit. Tap the two plastic grommets into holes with a hammer.

4. Mount the bracket to the ceiling by inserting and tightening the supplied screws into plastic grommets.

5. Connect the battery to the power connector.

6. Fix the battery into the battery box.

7. Fit the alarm on the bracket and turn the alarm body clockwise, until fully inserted into the bracket.

Everyone and home all need it ! save you lives !!!

Home fire starts every 83 seconds! That's why we need a smoke alarm? Photoelectric sensor smoke alarm to kill the fire at the beginning.
Widely Used:The Photoelectric Smoke and Fire Alarm is applicable to Company, Factory, Hospital,Shopping Mall, Hotel, School, Housing,Warehouse,Etc

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

4 Pack Battery Operated Smoke Detector & Fire Alarm with Photoelectric Sensor,Easy to Install with Test Button

BEST SELLERS

Product introduction

Shipping Notices

Product Description

PHOTOELECTRIC SMOKE ALARM IS FAR MORE SENSITIVE AND EFFECTIVE THAN IONIZATION SMOKE ALARM

How does Photoelectric Smoke alarm works?

Inside the smoke alarm, there is a LED light that sends a beam of light (similar to a laser pointer) in a separate compartment inside the chamber, there is a photosensor that detects light.
As smoke enters the detector, the smoke particles interrupt the light beam, scattering it in many directions. Some of the LED light scatters toward the light sensor. When light beams hit the sensor, the alarm will go off!
When the batteries in your smoke alarm get low, the smoke alarm automatically activates a low battery chirping sound different from the alarm sound so you know it's time to get new batteries.

Photoelectric sensors are set off when smoke enters the alarm and deflects the light of an LED beam onto a photocell.
For slow, smoky, smoldering fires, photoelectric alarms are far more sensitive and effective.
Choose a photoelectric model as our primary choice, killing the fire at the begining.

Installation Notes：

1. Turn the alarm body counterclockwise and take off the bracket.

2. Hold the bracket in the installation position as specified in the Recommended Locations, mark installation holes of the bracket with a pencil.

3. Drill the two marked installation holes with a 3/16 inch (5mm) drill bit. Tap the two plastic grommets into holes with a hammer.

4. Mount the bracket to the ceiling by inserting and tightening the supplied screws into plastic grommets.

5. Connect the battery to the power connector.

6. Fix the battery into the battery box.

7. Fit the alarm on the bracket and turn the alarm body clockwise, until fully inserted into the bracket.

Everyone and home all need it ! save you lives !!!

Home fire starts every 83 seconds! That's why we need a smoke alarm? Photoelectric sensor smoke alarm to kill the fire at the beginning.
Widely Used:The Photoelectric Smoke and Fire Alarm is applicable to Company, Factory, Hospital,Shopping Mall, Hotel, School, Housing,Warehouse,Etc

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.