JCS Rhinestones Lotus Flower Iron On Rhinestone and Rhinestud Transfers for T-Shirts

This lotus flower original design is created with clear and two shades of pink rhinestone crystals.

Simply iron on to your favorite t-shirt or tote bag

High quality glass rhinestone crystals and shiny pink rhinestuds

Easy iron-on instructions included - just peel, stick and iron

Size: approximately 4.5 x 4.5 inches

Retail Price: $ 6.7

Wholesale Price: Inquire Now

JCS Rhinestones features unique designs for a wide range of interests. The majority of our designs were created by our own in-house graphic designer.
JCS Rhinestone iron-on designs have been adding sparkle and bling to t-shirts since 2007! Follow the detailed instructions below to apply your iron-on rhinestone transfer to a t-shirt or tote bag.

Iron-on Rhinestone Transfer Instructions

Select a porous fabric or surface to apply your motif, such as a t-shirt. TEST YOUR PRODUCT FIRST TO BE SURE IT CAN WITHSTAND THE HEAT OF THE IRON.
Set your iron to a medium-high setting (wool or cotton), approximately 350 degrees. Turn the steam OFF. Place the shirt on a firm, flat surface. If necesssary, iron the shirt before applying rhinestones.
Insert a piece of paper between the front and back of the shirt so the glue will not seep to the back side.
Inspect the rhinestone design. On a hard surface, press fingernails over the plastic to nudge offset stones back into position. If desired, trim with scissors.
Peel the white paper backing off the plastic transfer sheet. Place the transfer sticky side down on the fabric. It may be gently removed and re-positioned at this point. Inspect the stone layout once more before ironing.
Iron the transfer with firm, even pressure. Do not wiggle the iron. Press and hold the iron onto all areas of the transfer for about 10-15 seconds, depending on the size of the stones. Larger stones take more time; metal studs take less time. Make sure that all stones are heated and have pressure applied. The stones under the iron’s vent holes will not receive pressure, so re-position the iron once or twice to compensate.
LET THE PLASTIC COOL TO ROOM TEMPERATURE. Gently and slowly peel the plastic away. The stones will remain on the fabric. If any stones are lifted up, replace the plastic and re-iron the areas where the stones were lifted.
After the plastic is completely removed, briefly press the iron to the stones to reset any that may have loosened.
The garment can be machine washed inside-out on a gentle, cold cycle. Lay flat or hang to dry.

***These iron on rhinestone transfers are not intended for use by or near small children. Please do not allow children access to these products.

Iron On Transfer Application Instructions

Peel the white paper backing off the plastic transfer sheet. Place the transfer sticky side down on the shirt. It may be gently removed and re-positioned at this point to get it exactly where you want it.

Iron the transfer with firm, even pressure on medium high heat. Do not wiggle the iron. Press and hold the iron onto all areas of the transfer for about 10-15 seconds.

WAIT! Let the plastic cool to room temperature.
Gently and slowly peel the plastic away. The stones will remain on the fabric. If any stones are lifted up, replace the plastic and re-iron the areas where the stones were lifted.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

JCS Rhinestones Lotus Flower Iron On Rhinestone and Rhinestud Transfers for T-Shirts

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Select a porous fabric or surface to apply your motif, such as a t-shirt. TEST YOUR PRODUCT FIRST TO BE SURE IT CAN WITHSTAND THE HEAT OF THE IRON.
Set your iron to a medium-high setting (wool or cotton), approximately 350 degrees. Turn the steam OFF. Place the shirt on a firm, flat surface. If necesssary, iron the shirt before applying rhinestones.
Insert a piece of paper between the front and back of the shirt so the glue will not seep to the back side.
Inspect the rhinestone design. On a hard surface, press fingernails over the plastic to nudge offset stones back into position. If desired, trim with scissors.
Peel the white paper backing off the plastic transfer sheet. Place the transfer sticky side down on the fabric. It may be gently removed and re-positioned at this point. Inspect the stone layout once more before ironing.
Iron the transfer with firm, even pressure. Do not wiggle the iron. Press and hold the iron onto all areas of the transfer for about 10-15 seconds, depending on the size of the stones. Larger stones take more time; metal studs take less time. Make sure that all stones are heated and have pressure applied. The stones under the iron’s vent holes will not receive pressure, so re-position the iron once or twice to compensate.
LET THE PLASTIC COOL TO ROOM TEMPERATURE. Gently and slowly peel the plastic away. The stones will remain on the fabric. If any stones are lifted up, replace the plastic and re-iron the areas where the stones were lifted.
After the plastic is completely removed, briefly press the iron to the stones to reset any that may have loosened.
The garment can be machine washed inside-out on a gentle, cold cycle. Lay flat or hang to dry.

***These iron on rhinestone transfers are not intended for use by or near small children. Please do not allow children access to these products.

Iron On Transfer Application Instructions

Iron the transfer with firm, even pressure on medium high heat. Do not wiggle the iron. Press and hold the iron onto all areas of the transfer for about 10-15 seconds.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.