Cooling Fan Clutch for Jeep Grand Cherokee 2005-2009 Commander 2006-2008 Liberty 2005-2006

Fits Jeep Grand Cherokee 2005-2009 V8 4.7L

Fits Jeep Commander 2006-2008 V8 4.7L

Fits Jeep Liberty 2005-2006 I4 2.8L

Reference Number: 55116882AA

1 year unlimited-mileage quality guarantee

Retail Price: $ 33.99

Wholesale Price: Inquire Now

The cooling fan clutch is a cooling system component that controls the operation of the engine cooling fan. When the engine overheats, the radiator needs the help of the cooling fan to blow air into the device. After the engine reaches the proper operating temperature, the fan clutch will be mechanically disengaged, thus saving some power for your vehicle.

Item Specification

Item Type: Engine Cooling Fan Clutch

Placement on Vehicle: Front

Material: Steel

Reference Number: 55116882AA, 52079718AC, 52079718AD, 2905

For Jeep:

Grand Cherokee 2005-2009 V8 4.7L Sport Utility
Commander 2006-2008 V8 4.7L Sport Utility
Liberty 2005-2006 I4 2.8L Sport Utility

Please confirm the vehicles' model, year as well as the engine size when you purchase!

Engine overheating: When the fan clutch fails to engage or work properly, as a result, the engine may fail to operate at an acceptable temperature range.
Excessively loud cooling fans: If the fan clutch gets stuck in the engaged position, this may result in an excessively loud engine from the fan blowing at full speed.
Pay attention to changes in air temperature: Switch on the A/C and turn it down to the coldest setting. If it fails to cool down after several minutes, or seems to be emitting unusually warm air, there could be a problem.
Check the appearance of the fan clutch: Examine the unit’s general condition, you’ll be able to tell right away if something is out of place or there’s any major structural damage.
Spot-check for oil leaks: Run your finger along the edges of the bearing seal on the backside of the fan clutch. If it comes away with a heavy coating of oil, the culprit is either a crack or a faulty seal.

How to Replace a Bad Fan Clutch


Removing the Fan Mechanically driven fans with four bolts Loosen the bolts in the fan cover to remove the fan. After that, disconnect the fan shroud and remove the shroud. Pull out the nut that secures the fan to the pump pulley, hold the fan and pull it forward with a slight rocking motion until the fan is loose and finally comes out. Cooling fan with large nut Disconnect the fan sealed by the large nut. Insert it around the bolt on the pulley. Use a large wrench to turn counterclockwise to loosen the nut.	Disconnecting the Clutch From the Fan Set aside the detached fan. Make sure that the shaft is up. Use the suitable socket and ratchet to remove the bolts that fasten the clutch to the fan.	Installing the New Fan Clutch Align the new fan clutch in the position and secure it to the fan by tightening the bolts. After that, reassemble the fan and shroud. The replacing steps are only for reference, and we recommend you to ask the technician to do the installation.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Cooling Fan Clutch for Jeep Grand Cherokee 2005-2009 Commander 2006-2008 Liberty 2005-2006

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Item Specification

Item Type: Engine Cooling Fan Clutch

Placement on Vehicle: Front

Material: Steel

Reference Number: 55116882AA, 52079718AC, 52079718AD, 2905

For Jeep:

Grand Cherokee 2005-2009 V8 4.7L Sport Utility
Commander 2006-2008 V8 4.7L Sport Utility
Liberty 2005-2006 I4 2.8L Sport Utility

Please confirm the vehicles' model, year as well as the engine size when you purchase!

Engine overheating: When the fan clutch fails to engage or work properly, as a result, the engine may fail to operate at an acceptable temperature range.
Excessively loud cooling fans: If the fan clutch gets stuck in the engaged position, this may result in an excessively loud engine from the fan blowing at full speed.
Pay attention to changes in air temperature: Switch on the A/C and turn it down to the coldest setting. If it fails to cool down after several minutes, or seems to be emitting unusually warm air, there could be a problem.
Check the appearance of the fan clutch: Examine the unit’s general condition, you’ll be able to tell right away if something is out of place or there’s any major structural damage.
Spot-check for oil leaks: Run your finger along the edges of the bearing seal on the backside of the fan clutch. If it comes away with a heavy coating of oil, the culprit is either a crack or a faulty seal.

How to Replace a Bad Fan Clutch


Removing the Fan Mechanically driven fans with four bolts Loosen the bolts in the fan cover to remove the fan. After that, disconnect the fan shroud and remove the shroud. Pull out the nut that secures the fan to the pump pulley, hold the fan and pull it forward with a slight rocking motion until the fan is loose and finally comes out. Cooling fan with large nut Disconnect the fan sealed by the large nut. Insert it around the bolt on the pulley. Use a large wrench to turn counterclockwise to loosen the nut.	Disconnecting the Clutch From the Fan Set aside the detached fan. Make sure that the shaft is up. Use the suitable socket and ratchet to remove the bolts that fasten the clutch to the fan.	Installing the New Fan Clutch Align the new fan clutch in the position and secure it to the fan by tightening the bolts. After that, reassemble the fan and shroud. The replacing steps are only for reference, and we recommend you to ask the technician to do the installation.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.