260 Brass Shim Stock, Unpolished (Mill) Finish, H02 Temper, ASTM B19/SAE-CA 260/ASTM B36/QQ-B-613, 0.025" Thickness, 6" Width, 100" Length
  • 260 brass is corrosion resistant and has good formability
  • Unpolished (mill) surface has no finish
  • 1/2 hard temper is softer than 3/4 hard temper for increased formability
  • Meets ASTM B19, and SAE-CA 260 and Fed. Spec. QQ-B-613 specifications
  • Standard tolerance
number:
  • 1
item:
  • 100 Inches
Retail Price: $ 56.6
Wholesale Price: Inquire Now
260 Brass Shim Stock, Unpolished (Mill) Finish, H02 Temper, ASTM B19/SAE-CA 260/ASTM B36/QQ-B-613, 0.025" Thickness, 6" Width, 100" Length
260 Brass Shim Stock, Unpolished (Mill) Finish, H02 Temper, ASTM B19/SAE-CA 260/ASTM B36/QQ-B-613, 0.025" Thickness, 6" Width, 100" Length

BEST SELLERS

The 260 brass shim stock with 1/2 hard temper has an unpolished (mill) surface and a standard tolerance, and meets American Society for Testing and Materials International ASTM B19, Society of Automotive Engineers SAE-CA 260, and Federal Specification QQ-B-613 standards. The 260 brass alloy is corrosion resistant and has good formability. It is nonmagnetic. The 1/2 hard temper is softer than 3/4 hard temper for increased formability.

The 260 brass shim stock with 1/2 hard temper has an unpolished (mill) surface and a standard tolerance, and meets American Society for Testing and Materials International ASTM B19, Society of Automotive Engineers SAE-CA 260, and Federal Specification QQ-B-613 standards. The 260 brass alloy is corrosion resistant and has good formability. It is nonmagnetic. The 1/2 hard temper is softer than 3/4 hard temper for increased formability.

Shim stock is very thin material that can be fabricated into specific shapes. Yield strength is the maximum stress a material can withstand before it will no longer return to its original shape. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Toughness describes the material's ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined.

Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.
After Sale Service:
1 Insurance Policy: Learn more
2 The rules apply and summit for receive compensation
3 The conditions of accrual for amount insurance
3 The conditions of accrual for amount insurance
5 Damage to the parcel during international shipping, which resulted in damage to the goods in it
6 Loss of individual goods under international shipment The absence individual goods in the parcel
7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment
8 Returns Policy: Learn more

BEST SELLERS

Inquire Now
X

Contact us now