Sunco Lighting 20 Pack 4FT T8 LED Tube, 18W=40W Fluorescent, Clear Cover, 5000K Daylight, Single Ended Power (SEP), Ballast Bypass, Commercial Grade - UL Listed, DLC
Top Rated T8 LED Tube Single Sided Connection with G13 Base
✅ 2 FOR 1 - Convert to LED with Sunco for instant energy savings (up to 85%), 1 LED tube does the job of 2 fluorescent tubes! Our T8 LED tubes provide instant bright light (+120 lumens/watt), no flickering for maximum eye comfort.
✅ COMMERCIAL GRADE - We uphold the highest standards for all our products by testing each product for optimal performance and safety. Certifications: UL. Specifications: Length 4 FT / 48 IN, Clear Cover, Color Temperature 5000K, Wattage 18, Lumens 2200, Voltage 120-277, Beam Angle 120, Shatter resistant, Flicker Free, Instant On, Long Lifetime, Sustainable.
✅ EASY INSTALL - Installation in 5 minutes or less! Locate the ballast, cut the hot and neutral wires then cut the socket lead wires and connect the input wires to the output wires to bypass the ballast. Requires non-shunted tombstones, not included.
✅ SUNCO BENEFITS - 5-Year Warranty! Sunco is proudly based in the USA, offering quality products at affordable prices backed by industry-leading warranties and knowledgeable support specialists.
What size are LED T8 tubes? Do they fit in a T12 size fixture?
The same G13 bi-pin connector can be found on both T8 and T12 LED Tube lights. The T8 LED Tubes Sunco sells are approximately 1.12” in diameter. An average T12 is about 1.5” in diameter. The same connector means that you can theoretically use a T8 LED Tube to replace a fluorescent T12 tube light, as it should fit in the socket – and vice versa.
What are tombstones? Do I want shunted or non-shunted tombstones for my LED T8 tubes?
Tombstones are sockets used in a shop light to hold the light tube into place and direct the power. You need non-shunted tombstones for Sunco LED T8 tubes (SEP). These are ideal as a fluorescent tube replacement for your existing garage shop lights.
Electrical current flows through multiple tracks or paths in a non-shunted tombstone. Their contacts are not connected or joined and they bypass the ballast. For safety reasons, a qualified electrician should perform any retrofitting.
Will LED T8 Linear Tubes become dim over time like a fluorescent tube?
No, Sunco LED T8 tubes do not have the light quality degradation issues that occur with fluorescents. The darkening of aged fluorescent tubes is caused by a loss of phosphors and mercury, neither of which is used in Sunco T8 LEDs.
What does single-ended (SEP) mean regarding LED tubes?
Single-ended Power (SEP) tubes – hot and neutral are on one side of the tube. The non-shunted tombstones (sockets) used with this type will have power on one end and the second socket is used as a stabilizer to help secure the tube in place.
What size are LED T8 tubes? Do they fit in a T12 size fixture?
The same G13 bi-pin connector can be found on both T8 and T12 LED Tube lights. The T8 LED Tubes Sunco sells are approximately 1.12” in diameter. An average T12 is about 1.5” in diameter. The same connector means that you can theoretically use a T8 LED Tube to replace a fluorescent T12 tube light, as it should fit in the socket – and vice versa.
What are tombstones? Do I want shunted or non-shunted tombstones for my LED T8 tubes?
Tombstones are sockets used in a shop light to hold the light tube into place and direct the power. You need non-shunted tombstones for Sunco LED T8 tubes (SEP). These are ideal as a fluorescent tube replacement for your existing garage shop lights.
Electrical current flows through multiple tracks or paths in a non-shunted tombstone. Their contacts are not connected or joined and they bypass the ballast. For safety reasons, a qualified electrician should perform any retrofitting.
Will LED T8 Linear Tubes become dim over time like a fluorescent tube?
No, Sunco LED T8 tubes do not have the light quality degradation issues that occur with fluorescents. The darkening of aged fluorescent tubes is caused by a loss of phosphors and mercury, neither of which is used in Sunco T8 LEDs.
What does single-ended (SEP) mean regarding LED tubes?
Single-ended Power (SEP) tubes – hot and neutral are on one side of the tube. The non-shunted tombstones (sockets) used with this type will have power on one end and the second socket is used as a stabilizer to help secure the tube in place.
Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.