Digilent Zybo Z7: Zynq-7000 ARM/FPGA SoC Development Board (Zybo Z7-10)

Zybo Z7 comes in two APSoC variants: Zybo Z7-10 features Xilinx XC7Z010-1CLG400C. Zybo Z7-20 features the larger Xilinx XC7Z020-1CLG400C. Either variant also has the option to add the SDSoC voucher.

A feature-rich, ready-to-use embedded software and digital circuit development board with a rich set of multimedia and connectivity peripherals to create a formidable single-board computer

Built around the Xilinx Zynq-7000 AP SoC, with 650MHz dual-core Cortex-A9 processor and DDR3 memory controller with 8 DMA channels

On board user interfaces include 6 push buttons, 4 slide switches, 5 LEDs, 2 RGB LEDs, and more

Expansion opportunities with six Pmod connector ports, over 30 FPGA I/O, four Analog capable 0-1.0V differential pairs to XADC, and more

Retail Price: $ 199.0

Wholesale Price: Inquire Now

zybo z7-10 zybo z7-20 7010 7020 xilinx digilent APSoC SoC system on chip FPGA zynq

Zybo Z7 top view digilent FPGA development board zynq 7000 processor xilinx

zynq 7000 processor xilinx digilent FPGA development board system on chip SoC

Why Zynq SoC Technology?

Zynq products are an ideal entry point for either users coming from either FPGA-dominate skill set wishing to learn or use processors or programmers who wish to learn how to create custom hardware.

Zybo Z7: All-purpose Zynq (APSoC) development board for flexible hardware programmability

The Zybo Z7 is the ideal starting point for designers who want to leverage the best of FPGA and processor development. With Xilinx’s Zynq-7000 technology, the Zybo Z7 features multimedia and connectivity peripherals that allow designers to transform the Zybo Z7 into a formidable single-board computer to fit into a variety of design requirements.

The Zybo Z7's video-capable feature set includes a MIPI CSI-2 compatible Pcam connector, HDMI input & output, and high DDR3L.


Comes in two versions, a 7010 and 7020 version. Both versions feature 1 GB DDR3L with 32-bit bus @ 1066 MHz Wide range of USB, Ethernet, Video, and Audio connectivity Pmod connectors for adding-on hardware devices Pcam connector for attaching camera sensors with MIPI CSI-2 interface	Pmod connectors for adding-on hardware devices Attaching additional hardware is made easy by the Zybo Z7's Pmod connectors, allowing access to Digilent's catalog of over 70 Pmod peripheral boards, including motor controllers, sensors, displays, and more.	Pcam connector for attaching camera sensors with MIPI CSI-2 interface, such as the Digilent Pcam module. Digilent has demonstration projects and add-ons to help designers get acquainted and ready to use the Pcam and Zybo Z7 for quick and easy Embedded Vision familiarity.	Onboard programming circuit accessible over USB Mini (cable not included). Designers who use the Zybo Z7 for prototyping and wish to design their own hardware can purchase the JTAG SMT3 for their own hardware designs.

Zynq Processor

667 MHz dual-core Cortex-A9 processor
DDR3L memory controller with 8 DMA channels and 4 High Performance AXI3 Slave ports
High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO
Low-bandwidth peripheral controllers: SPI, UART, CAN, I2C
Programmable from JTAG, Quad-SPI flash, and microSD card
Programmable logic equivalent to Artix-7 FPGA

Memory and Power

1 GB DDR3L with 32-bit bus @ 1066 MHz
16 MB Quad-SPI Flash with factory programmed 128-bit random number and 48-bit globally unique EUI-48/64 compatible identifier
microSD slot

USB, Ethernet, Audio, and Video

Powered from USB or any 5V external power source
Gigabit Ethernet PHY
USB-JTAG Programming circuitry
USB-UART bridge
USB 2.0 OTG PHY with host and device support
Pcam camera connector with MIPI CSI-2 support
HDMI sink port (input) with CEC (Zybo Z7-20) and without CEC (Zybo Z7-10)
HDMI source port (output) with CEC
Audio codec with stereo headphone, stereo line-in, and microphone jacks

Switches, Push-buttons, LEDs, and Expansion Connectors

6 push-buttons (2 processor connected)
4 slide switches
5 LEDs (1 processor connected)
2 RGB LEDs (Zybo Z7-20) and 1 RGB LED (Zybo Z7-10)
6 Pmod ports (Zybo Z7-20) and 5 Pmod Ports (Zybo Z7-10)
8 Total Processor I/O
40 Total FPGA I/O (Zybo Z7-20) and 32 (Zybo Z7-10)
4 Analog capable 0-1.0V differential pairs to XADC


	Zybo Z7-10 (199.00)	Zybo Z7-20 (299.00)	Arty Z7-10 (149.00)	Arty Z7-20 (209.00)	ZedBoard (495.00)
IC	XC7Z010-1CLG400C	XC7Z020-1CLG400C	XC7Z010-1CLG400C	XC7Z020-1CLG400C	XC7Z020-1CSG484CES
Total Pmod Ports	5	6	2	2	5
FMC Connector	No	No	No	No	Yes
HDMI	TX Port only	TX and RX Ports	TX and RX Ports	TX and RX Ports	TX Port
RGB LEDs	1 RGB and 5 LED	2 RGB and 5 LED	2 RGB and 4 LED	2 RGB and 4 LED	9 LEDs
Switches	6 buttons, 4 Switches	6 buttons, 4 Switches	2 buttons, 2 Switches	2 buttons, 2 Switches	7 buttons, 8 Switches
DDR3	1GB	1GB	512 MB	512 MB	512 MB
Quad-SPI Flash	16 MB	16 MB	16 MB	16 MB	256 MB
Audio Codec	SSM2603	SSM2603	PWM driven	PWM driven	ADU1761
Video I/O	HDMI in and out	HDMI in and out	HDMI in and out	HDMI in and out	HDMI, VGA, 128x32 OLED Display

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Digilent Zybo Z7: Zynq-7000 ARM/FPGA SoC Development Board (Zybo Z7-10)

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Why Zynq SoC Technology?

Zynq products are an ideal entry point for either users coming from either FPGA-dominate skill set wishing to learn or use processors or programmers who wish to learn how to create custom hardware.

Zybo Z7: All-purpose Zynq (APSoC) development board for flexible hardware programmability

The Zybo Z7's video-capable feature set includes a MIPI CSI-2 compatible Pcam connector, HDMI input & output, and high DDR3L.


Comes in two versions, a 7010 and 7020 version. Both versions feature 1 GB DDR3L with 32-bit bus @ 1066 MHz Wide range of USB, Ethernet, Video, and Audio connectivity Pmod connectors for adding-on hardware devices Pcam connector for attaching camera sensors with MIPI CSI-2 interface	Pmod connectors for adding-on hardware devices Attaching additional hardware is made easy by the Zybo Z7's Pmod connectors, allowing access to Digilent's catalog of over 70 Pmod peripheral boards, including motor controllers, sensors, displays, and more.	Pcam connector for attaching camera sensors with MIPI CSI-2 interface, such as the Digilent Pcam module. Digilent has demonstration projects and add-ons to help designers get acquainted and ready to use the Pcam and Zybo Z7 for quick and easy Embedded Vision familiarity.	Onboard programming circuit accessible over USB Mini (cable not included). Designers who use the Zybo Z7 for prototyping and wish to design their own hardware can purchase the JTAG SMT3 for their own hardware designs.

Zynq Processor

667 MHz dual-core Cortex-A9 processor
DDR3L memory controller with 8 DMA channels and 4 High Performance AXI3 Slave ports
High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO
Low-bandwidth peripheral controllers: SPI, UART, CAN, I2C
Programmable from JTAG, Quad-SPI flash, and microSD card
Programmable logic equivalent to Artix-7 FPGA

Memory and Power

1 GB DDR3L with 32-bit bus @ 1066 MHz
16 MB Quad-SPI Flash with factory programmed 128-bit random number and 48-bit globally unique EUI-48/64 compatible identifier
microSD slot

USB, Ethernet, Audio, and Video

Powered from USB or any 5V external power source
Gigabit Ethernet PHY
USB-JTAG Programming circuitry
USB-UART bridge
USB 2.0 OTG PHY with host and device support
Pcam camera connector with MIPI CSI-2 support
HDMI sink port (input) with CEC (Zybo Z7-20) and without CEC (Zybo Z7-10)
HDMI source port (output) with CEC
Audio codec with stereo headphone, stereo line-in, and microphone jacks

Switches, Push-buttons, LEDs, and Expansion Connectors

6 push-buttons (2 processor connected)
4 slide switches
5 LEDs (1 processor connected)
2 RGB LEDs (Zybo Z7-20) and 1 RGB LED (Zybo Z7-10)
6 Pmod ports (Zybo Z7-20) and 5 Pmod Ports (Zybo Z7-10)
8 Total Processor I/O
40 Total FPGA I/O (Zybo Z7-20) and 32 (Zybo Z7-10)
4 Analog capable 0-1.0V differential pairs to XADC


	Zybo Z7-10 (199.00)	Zybo Z7-20 (299.00)	Arty Z7-10 (149.00)	Arty Z7-20 (209.00)	ZedBoard (495.00)
IC	XC7Z010-1CLG400C	XC7Z020-1CLG400C	XC7Z010-1CLG400C	XC7Z020-1CLG400C	XC7Z020-1CSG484CES
Total Pmod Ports	5	6	2	2	5
FMC Connector	No	No	No	No	Yes
HDMI	TX Port only	TX and RX Ports	TX and RX Ports	TX and RX Ports	TX Port
RGB LEDs	1 RGB and 5 LED	2 RGB and 5 LED	2 RGB and 4 LED	2 RGB and 4 LED	9 LEDs
Switches	6 buttons, 4 Switches	6 buttons, 4 Switches	2 buttons, 2 Switches	2 buttons, 2 Switches	7 buttons, 8 Switches
DDR3	1GB	1GB	512 MB	512 MB	512 MB
Quad-SPI Flash	16 MB	16 MB	16 MB	16 MB	256 MB
Audio Codec	SSM2603	SSM2603	PWM driven	PWM driven	ADU1761
Video I/O	HDMI in and out	HDMI in and out	HDMI in and out	HDMI in and out	HDMI, VGA, 128x32 OLED Display

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.