CCTV Camera Pros VDS-1632HD HD CCTV Video Distribution Box | 16 in / 32 Out Active BNC Splitter | RG59 RG6 | 960H Analog AHD HD-TVI HDCVI

Retail Price: $ 79.99

Wholesale Price: Inquire Now

The VDS-1632HD is 32 channel CCTV video distribution box that works with HD security cameras (AHD HD-TVI HDCVI) and analog CCTV cameras. The following video resolutions are supported: 5 Megapixel, 4 Megapixel, 3 Megapixel, 1080p, 720p, 960H, D1, CIF. This video distributor has 16 BNC video inputs and 32 BNC outputs. This is an excellent device for surveillance video applications that require multiple security cameras to be connected to multiple monitors, video processors, or DVRs.

The VDS-1632HD splitter can be used with video amplifiers if you also need to extend the video signal of any of your security cameras. It is enclosed in a 1U rack-mount case and the 12V DC power supply is included. Installers can use 75Ohm RG59 cable or RG6 cable with this product.

This product is made for use with HDCVI cameras, HD-TVI cameras, and AHD cameras. It does NOT work with HD-SDI security cameras.

VDS-1632HD Features:

HDCVI, AHD, and HD-TVI Cameras Supported
Analog CCTV Cameras Supported (CVBS)
All HD over Coax Video Resolutions Supported
Works with NTSC and PAL Analog Cameras
D1 and 960H Analog Resolutions Supported
16 BNC Video Inputs - 75 Ohm
32 BNC Video Outputs - 75 Ohm
Built-in power surge protection / TVS
12V DC 1 Amp Power Supply Included
Power Consuption: 700mA
Dimensions: 483 x 105.5 x 44mm / 19 x 4.1 x 1.7 inches
Weight: 2050 Grams / 4.5 Pounds

CCTV HD Video Distribution Box, 16 to 32 Channel BNC Converter, HD-TVI Video Splutter, AHD Splitter

User-Friendly Installation

The VDS-1632HD is easy to install. Here is how it works.

Each BNC video input has two BNC video outputs.
Each channel can be used for any type HD security camera (AHD, HD-TVI, HDCVI) or analog CCTV camera.
In the above diagram, the security camera on the left is connected to a video input using RG59 coax cable with a BNC connector end.
The two video outputs from the camera on the left are connected to a DVR.
The security camera on the right is connected to another video input channel on the video distribution box - using RG59 coax cable.
The two outputs from that channel are each connected to a video display monitor.
The VDS-1632HD is powered using the 12V DC power supply that is included.
The VDS-1632HD can be desktop or rack mounted.

**Please note that analog CCTV cameras can be directly connected to analog CCTV monitors or the analog RCA input of standard TVs. However, HD cameras require a BNC to HDMI converter to be connected to the HDMI input of a TV or monitor. HD security cameras CAN NOT connect directly to the analog video input of a TV.

CCTV Video Distribution Box, HD BNC Camera Video Splitter, HD Analog Video Splitter

Video Splitter and Amplifier Installation

If you need to amplify the video signal for any of your security cameras in addition to splitting the signal, the AMP-1001 analog CCTV video amplifier and the AMP-101HD HD over coax video amplifiers can be used in conjunction with the VDS-1632HD. The AMP-101HD is compatible with AHD, HD-TVI, and HDCVI type cameras. In the above application, the video output from each security camera is boosted before sending the signal to the VDS-1632HD. With these single-channel video amps, they can be used on as few or as many of the 16 channels as you require.

Long Range Video Amplifier Setup, CCTV Video Splitter and Amplifier, HD Video Distribution Box

Support for Applications with Multiple Amplifiers

Some applications may require the video output from the security camera and one or both of the split video signals to also be amplified. You can amplify video signals on the input and output side of the VDS-1632HD video splitter. That is what is happening in the above installation. The two video outputs from the splitter are both amplified before being transmitted to the monitor and DVR.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

CCTV Camera Pros VDS-1632HD HD CCTV Video Distribution Box | 16 in / 32 Out Active BNC Splitter | RG59 RG6 | 960H Analog AHD HD-TVI HDCVI

BEST SELLERS

Product introduction

Shipping Notices

Product Description

This product is made for use with HDCVI cameras, HD-TVI cameras, and AHD cameras. It does NOT work with HD-SDI security cameras.

VDS-1632HD Features:

HDCVI, AHD, and HD-TVI Cameras Supported
Analog CCTV Cameras Supported (CVBS)
All HD over Coax Video Resolutions Supported
Works with NTSC and PAL Analog Cameras
D1 and 960H Analog Resolutions Supported
16 BNC Video Inputs - 75 Ohm
32 BNC Video Outputs - 75 Ohm
Built-in power surge protection / TVS
12V DC 1 Amp Power Supply Included
Power Consuption: 700mA
Dimensions: 483 x 105.5 x 44mm / 19 x 4.1 x 1.7 inches
Weight: 2050 Grams / 4.5 Pounds

User-Friendly Installation

The VDS-1632HD is easy to install. Here is how it works.

Each BNC video input has two BNC video outputs.
Each channel can be used for any type HD security camera (AHD, HD-TVI, HDCVI) or analog CCTV camera.
In the above diagram, the security camera on the left is connected to a video input using RG59 coax cable with a BNC connector end.
The two video outputs from the camera on the left are connected to a DVR.
The security camera on the right is connected to another video input channel on the video distribution box - using RG59 coax cable.
The two outputs from that channel are each connected to a video display monitor.
The VDS-1632HD is powered using the 12V DC power supply that is included.
The VDS-1632HD can be desktop or rack mounted.

Video Splitter and Amplifier Installation

Support for Applications with Multiple Amplifiers

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.