Sailboat Rigging Tension Gauge from Loos & Co., PT-2M Professional Metric Hands-Free Force Gauge for Tensioning and Tuning of Shrouds, Cable Rigs, Wire Rope Standing Rigging, and Forestays, for 5, 6, and 7 milimeter Cable Diameter
Sailboat Rigging Tension Gauge from Loos & Co., PT-2M Professional Metric Hands-Free Force Gauge for Tensioning and Tuning of Shrouds, Cable Rigs, Wire Rope Standing Rigging, and Forestays, for 5, 6, and 7 milimeter Cable Diameter
  • Measures tension in cables to check for proper setup in sail rigging and supporting cables for large tents, radio towers, and other structures
  • Analog gauge shows present tension in kilograms (kg)
  • Measurement accuracy of + or - 5 percent
  • Measures tension from approximately 5 to 25 percent of the cable's breaking strength
  • Can remain hooked on the wire during testing while tension is adjusted
size:
  • 620 kg
Retail Price: $ 124.0
Wholesale Price: Inquire Now

Loos Collection of Tension Gauges

Tension Gauges

Loos Cableware Division offers a series of gauges to measure the tension in cables and rods from 3/32 to 3/8 inch in diameter (2.5 mm to 10 mm). These gauges are designed for setting the proper tension in the standing rigging of sailboats and also for other applications such as supporting cables for radio towers, large tents and other structures. The gauges are relatively inexpensive and are designed to be suitable for rugged marine service. The "Professional Models" provide an increasing durability, accuracy and convenience of use when compared to our popular standard models. The gauge may be hooked on the wire and will remain in position while the tension is adjusted. Manufactured of rugged anodized aluminum, this gauge is corrosive resistant and will give years of service. Detailed operating instructions are included with each tension gauge.

Professional Models - Higher accuracy and easier to use than standard models. The cable can be adjusted while the gauge remains on the cable. "Just watch the pointer move." All readings are based on 302/304 1x19 S.S breaking strengths.

The gauges measure tension over a range of approximately 5% to 25% of the breaking strength of the cable and provide an accuracy of + or - 5%.

MADE IN USA: Yes

Read more
Read more
This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.
...
After Sale Service:
1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy
2 The rules apply and summit for receive compensation
3 The conditions of accrual for amount insurance
3 The conditions of accrual for amount insurance
5 Damage to the parcel during international shipping, which resulted in damage to the goods in it
6 Loss of individual goods under international shipment The absence individual goods in the parcel
7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment
8 Returns Policy: Click to go to the Help Center to view the Returns Policy
...
...
Sailboat Rigging Tension Gauge from Loos & Co., PT-2M Professional Metric Hands-Free Force Gauge for Tensioning and Tuning of Shrouds, Cable Rigs, Wire Rope Standing Rigging, and Forestays, for 5, 6, and 7 milimeter Cable Diameter
Sailboat Rigging Tension Gauge from Loos & Co., PT-2M Professional Metric Hands-Free Force Gauge for Tensioning and Tuning of Shrouds, Cable Rigs, Wire Rope Standing Rigging, and Forestays, for 5, 6, and 7 milimeter Cable Diameter

BEST SELLERS

...
The Loos Cableware metric tension gauge measures the tension in cables to check for proper setup in sail rigging and supporting cables for large tents, radio towers, and other structures. This analog gauge shows present tension in kilograms (kg) and has a measurement accuracy of + or - 5 percent. The gauge shows readings on a graduated scale, and a calibration table on the unit converts a scale reading to the corresponding present tension and percentage breaking strength of the rope, based on 302/304 1 x 19 stainless-steel wire rope. The gauge can remain hooked on the wire during testing while the tension is adjusted. The Loos Cableware metric tension gauge has an anodized aluminum body that resists corrosion and wear. A 1/4" hole on the gauge's body allows a lanyard or hook to be attached to the gauge for securing it to the cable.

From the manufacturer

Loos Collection of Tension Gauges

Tension Gauges

Loos Cableware Division offers a series of gauges to measure the tension in cables and rods from 3/32 to 3/8 inch in diameter (2.5 mm to 10 mm). These gauges are designed for setting the proper tension in the standing rigging of sailboats and also for other applications such as supporting cables for radio towers, large tents and other structures. The gauges are relatively inexpensive and are designed to be suitable for rugged marine service. The "Professional Models" provide an increasing durability, accuracy and convenience of use when compared to our popular standard models. The gauge may be hooked on the wire and will remain in position while the tension is adjusted. Manufactured of rugged anodized aluminum, this gauge is corrosive resistant and will give years of service. Detailed operating instructions are included with each tension gauge.

Professional Models - Higher accuracy and easier to use than standard models. The cable can be adjusted while the gauge remains on the cable. "Just watch the pointer move." All readings are based on 302/304 1x19 S.S breaking strengths.

The gauges measure tension over a range of approximately 5% to 25% of the breaking strength of the cable and provide an accuracy of + or - 5%.

MADE IN USA: Yes

Read more
Read more
Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
... ... ...
Liquid,cream or cosmetics items are quantity limited in shopping agent service
... ... ...
Chinese medicine is limited to ship by Chinese exporting goods.
...
2 Limitation for different shipping methods:
...
3 Yoybuy Product's Label:
...
Sensitive Product(SEN)
...
Product With battery
...
Cream
...
Powder
...
Dangerous Products
...
....
4 Volume weight Requested:
...
volume weight=length*height*Width/5000
...
one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；
...
...
...
...
...
Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.
After Sale Service:
2 The rules apply and summit for receive compensation
3 The conditions of accrual for amount insurance
3 The conditions of accrual for amount insurance
5 Damage to the parcel during international shipping, which resulted in damage to the goods in it
6 Loss of individual goods under international shipment The absence individual goods in the parcel
7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment
...

BEST SELLERS

登录
注册
Inquire Now
X

Contact us now

Language

Currency

    Upload image to find the same item

    Drag the image here, or Click to upload Tips: Only jpg, jpeg, png, webp

    Scan the QR code and use your phone to take a direct photo search.

    ×