Hanchen Auto Heat-shrink Tube Cutting Machine Precise Cable Cutter for Sleeve, Rubber,Plastic,PE,Mylar,Glass Fiber,Copper foil Pipe, Wire, Sheet, Film 500W 0.1MM 100Slices/Min 100M Max Width 60m/min

Retail Price: $ 1799.0

Wholesale Price: Inquire Now

Parameters:

Model: MZ-ACJ
Voltage: 220v /110v ; 60HZ/50HZ
Power: 500 W
Cutting Length: 100m
Blade Width: 100mm
Max Cutting Diameter: 11 mm
Weight: 28 KG
Dimension: L360xW300xH350mm
Cut speed: 100-120cut/ minute (50mm)

Widely used in electronic industry, automobile and motorcycle parts industry, garment and leather industry, electrical appliances, motors, toys, transformers and other industries. (Different materials have different requirements)

!!! Feed pulling force is 3 times greater than MZ-100
!!! Cutter force is 10 times greater than MZ-100

Scope of application:

The cutting machine is suitable for tube, cable, sheet, film, tape. Such as:

Attention:
Please leave us a message about the material and thickness of tube you will cut, therefore we can send you the machine with corresponding blade.

Tube: PVC tube, heat shrink tube, PVC heat shrinking tube, fiberglass tube, Teflon tube, corrugated tube, etc.
Cable: Flat cable, wire, etc
Tape: nickel strap, Velcro, cotton tape, elastic band, plastic tape, zipper, conductive tape, foam, etc
Sheet: battery separator, Nickel sheet, diffuser sheet, PVC sheet, Plastic sheet, etc
Film: plastic film, reflecting film, double-sided tape, Malar film, insulation paper, PE, Copper/Aluminum foil, release paper, etc

Sharp and Durable SKD Blade:

The edge grinding is regular and smooth, and achieves the desired sharpness.
The surface is made by imported steel and heat treatment, which enhances the wear resistance of the products.
Maximum Cutting Width 100MM/4.0inch
Tube cutting machine of YS-100, with cutting length of 0.1 - 9999.9mm/393.7inch

LED English System:

Full English function button/operating system, easy to control the length and width of cutting materials, which is clear and accurate:
Batch, speed can also be set; no worry about too long or too short!

Anti-rust Two-phase 86 Hybrid Progressive Motor:

High performance, special structure, excellent material and advanced manufacturing technology, using Nd-Fe-B with high properties
Temperature resistance and up to 180 degrees!
The motor shaft is non-embroidered steel, never rust!

Pressure regulating screw:

The pressure regulating screw are used to control the pressure of the feeding drum, and the cutting accuracy can be directly controlled.
The surface is made by imported steel and heat treatment, which enhances the wear resistance of the products.


	MZ-100	MZ-ACJ	YS-100H	CG2-11G1	CG2-11G2	CG2-150
Power	250 W	500 W	250w	Acetylene+Oxygen	Propane+Oxygen	Acetylene + Oxygen
Speed	18m/min	60m/min	10000/hr	manual control	manual control	50-750mm/min
Max Cutting Width	10m	100m	100mm
Auto/Manual	Auto	Both	Auto	Manual	Manual	Auto
Precise Measuring Instrument		✓
Cutting Length:	0.1 - 9999.9mm	0.1 - 9999.9mm	0.1 - 9999.9mm
LCD large-screen	✓	✓	✓
Tube diameter:	100mm	100mm			100~600mm	100~600mm
Tube thickness:					5-50mm	5-100mm
Precision	0.5 mm	0.1MM		1mm/1000mm	1mm/1000mm	1mm/1000mm

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Hanchen Auto Heat-shrink Tube Cutting Machine Precise Cable Cutter for Sleeve, Rubber,Plastic,PE,Mylar,Glass Fiber,Copper foil Pipe, Wire, Sheet, Film 500W 0.1MM 100Slices/Min 100M Max Width 60m/min

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Parameters:

Model: MZ-ACJ
Voltage: 220v /110v ; 60HZ/50HZ
Power: 500 W
Cutting Length: 100m
Blade Width: 100mm
Max Cutting Diameter: 11 mm
Weight: 28 KG
Dimension: L360xW300xH350mm
Cut speed: 100-120cut/ minute (50mm)

Widely used in electronic industry, automobile and motorcycle parts industry, garment and leather industry, electrical appliances, motors, toys, transformers and other industries. (Different materials have different requirements)

!!! Feed pulling force is 3 times greater than MZ-100
!!! Cutter force is 10 times greater than MZ-100

Scope of application:

The cutting machine is suitable for tube, cable, sheet, film, tape. Such as:

Attention:
Please leave us a message about the material and thickness of tube you will cut, therefore we can send you the machine with corresponding blade.

Tube: PVC tube, heat shrink tube, PVC heat shrinking tube, fiberglass tube, Teflon tube, corrugated tube, etc.
Cable: Flat cable, wire, etc
Tape: nickel strap, Velcro, cotton tape, elastic band, plastic tape, zipper, conductive tape, foam, etc
Sheet: battery separator, Nickel sheet, diffuser sheet, PVC sheet, Plastic sheet, etc
Film: plastic film, reflecting film, double-sided tape, Malar film, insulation paper, PE, Copper/Aluminum foil, release paper, etc

Sharp and Durable SKD Blade:

The edge grinding is regular and smooth, and achieves the desired sharpness.
The surface is made by imported steel and heat treatment, which enhances the wear resistance of the products.
Maximum Cutting Width 100MM/4.0inch
Tube cutting machine of YS-100, with cutting length of 0.1 - 9999.9mm/393.7inch

LED English System:

Full English function button/operating system, easy to control the length and width of cutting materials, which is clear and accurate:
Batch, speed can also be set; no worry about too long or too short!

Anti-rust Two-phase 86 Hybrid Progressive Motor:

High performance, special structure, excellent material and advanced manufacturing technology, using Nd-Fe-B with high properties
Temperature resistance and up to 180 degrees!
The motor shaft is non-embroidered steel, never rust!

Pressure regulating screw:

The pressure regulating screw are used to control the pressure of the feeding drum, and the cutting accuracy can be directly controlled.
The surface is made by imported steel and heat treatment, which enhances the wear resistance of the products.


	MZ-100	MZ-ACJ	YS-100H	CG2-11G1	CG2-11G2	CG2-150
Power	250 W	500 W	250w	Acetylene+Oxygen	Propane+Oxygen	Acetylene + Oxygen
Speed	18m/min	60m/min	10000/hr	manual control	manual control	50-750mm/min
Max Cutting Width	10m	100m	100mm
Auto/Manual	Auto	Both	Auto	Manual	Manual	Auto
Precise Measuring Instrument		✓
Cutting Length:	0.1 - 9999.9mm	0.1 - 9999.9mm	0.1 - 9999.9mm
LCD large-screen	✓	✓	✓
Tube diameter:	100mm	100mm			100~600mm	100~600mm
Tube thickness:					5-50mm	5-100mm
Precision	0.5 mm	0.1MM		1mm/1000mm	1mm/1000mm	1mm/1000mm

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.