A ABIGAIL Auto CV Joint Boot Clamps Pliers Car Band Tools Kit Set- Automotive Hose Axle Plier 2PCS

【Funnction】This CV joint boot clamps pilers are key tools to fix the CV boots. They are used to bind, tenseion and sercure CV boot banding straps It helps you work more quickly.

【Design】The CV joint boot clamps pilers are newly deisnged with a buit in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. And the CV joint boot clamps pilers are manufactured with pressed steel with black coating. It looks much more shinning and it is totally rust adn corrosion resistant.

【Size】There are two parts with the CV joint clamp tools, including a 4.25 inch (10.8cm) long plastic handle and 1 inch (2.5cm) long rubber grips on side levers. Pliers includes 5.75 inch (14.6cm) long formed rubber handles.

【Application】Generally, these CV joint boot clamps pilers are used on steering gear gainters and fuel hoses on VAG, OPEL, BWM, Merchdes Benz, Honda, Nissan, Mazda and many other types of vehicle. And it also works with any banding up to 2/5 inch (10mm) in width and ear-type hose clips.

【Service】100% satisfaction guarantee, If you have any issues with the Auto Cv Joint Boot Clamps Pliers, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.

Retail Price: $ 17.99

Wholesale Price: Inquire Now

About A ABIGAIL CV Joint Ear Clamp Banding Tool & Boot Crimp Pliers - 2 Piece Kit

Tighten, secure, and even crimp a CV boot banding strap with the MIKKUPPA CV Joint Ear Clamp Banding Tool & Boot Crimp Pliers 2-Piece Kit for Cooling System, Vacuum Hose Clamping Set.

Specifications:

Heavy Duty
Comfortable double dipped handles
Hardened steel
CV boot clamp installer
To be used with any banding up to 10mm in width
CV Boot; Hose Clamp Pliers Ear Type
Crimps and flattens clamps on ear type CV joint boot clamps
For installing CV Clamps
Standard banding tool for CV Joint Boots

Easy To Use:

Wrap free-end clamps 3/8" or 1/4" roll band and clip around and clip around boot.
Place a 1/2" ratchet wrench on the winding mandrel and turn. When sufficient tension has been applied, rotate the tool over the boot, bending the band back onto the clip.
To complete clamping, fold down the remaining tail of the band into the clip and secure it by tapping down the ears of the clip. Note: For added strength, double-wrapped band is recommended.


CV joint boot clamps pilers Including a 4.25 inch (10.8cm) long plastic handle and 1 inch (2.5cm) long rubber grips on side levers. Pliers includes 5.75 inch (14.6cm) long formed rubber handles.	High Quality Manufactured with pressed steel with black coating. It looks much more shinning and it is totally rust adn corrosion resistant.	Function This CV joint boot clamps pilers are key tools to fix the CV boots. They are used to bind, tenseion and sercure CV boot banding straps It helps you work more quickly.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

A ABIGAIL Auto CV Joint Boot Clamps Pliers Car Band Tools Kit Set- Automotive Hose Axle Plier 2PCS

BEST SELLERS

Product introduction

Shipping Notices

Product Description

About A ABIGAIL CV Joint Ear Clamp Banding Tool & Boot Crimp Pliers - 2 Piece Kit

Tighten, secure, and even crimp a CV boot banding strap with the MIKKUPPA CV Joint Ear Clamp Banding Tool & Boot Crimp Pliers 2-Piece Kit for Cooling System, Vacuum Hose Clamping Set.

Specifications:

Heavy Duty
Comfortable double dipped handles
Hardened steel
CV boot clamp installer
To be used with any banding up to 10mm in width
CV Boot; Hose Clamp Pliers Ear Type
Crimps and flattens clamps on ear type CV joint boot clamps
For installing CV Clamps
Standard banding tool for CV Joint Boots

Easy To Use:

Wrap free-end clamps 3/8" or 1/4" roll band and clip around and clip around boot.
Place a 1/2" ratchet wrench on the winding mandrel and turn. When sufficient tension has been applied, rotate the tool over the boot, bending the band back onto the clip.
To complete clamping, fold down the remaining tail of the band into the clip and secure it by tapping down the ears of the clip. Note: For added strength, double-wrapped band is recommended.


CV joint boot clamps pilers Including a 4.25 inch (10.8cm) long plastic handle and 1 inch (2.5cm) long rubber grips on side levers. Pliers includes 5.75 inch (14.6cm) long formed rubber handles.	High Quality Manufactured with pressed steel with black coating. It looks much more shinning and it is totally rust adn corrosion resistant.	Function This CV joint boot clamps pilers are key tools to fix the CV boots. They are used to bind, tenseion and sercure CV boot banding straps It helps you work more quickly.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.