Homemade Dino Gummies

Creating the liquid mixture

1. Mix ½ cup of water, 1 Jello package and 3 Gelatin packages and mix. ( upgrade to 5 Gelatin for more Chewy Gummy Dinos )

2. Again, Mix another ½ cup of water and mix all fully and let it sit for 15 minutes. This allows the Gelatin to dissolve.

3. Heat up the pan over medium heat and add the final ½ cup of water and stir until fully smooth and the gelatin has fully dissolved and then remove from heat.

4. Skim the liquid with any air bubbles to create a clear Gummies.

5. Optional, Add any vitamin such as Vitamin C tablet to the mixture or liquid vitamin B to the mixture.

.

Next Step

Filling the Dinosaur mold with the liquid mixture

1. Place the mold on a flat tray so it is easy to transport after filling it.

2. Use kitchen syringe or dropper to fill the mold cavities.

3. Place in fridge for minimum of two hours (the longer, the better) if you find them hard to take out of the molds, keep longer in the fridge.

Tip: Use a bottle with nozzle to fill the mold cavities. Makes the process much faster.

.

Next Step

Removing the finished product from the mold

With one fingertip firmly push down on the Dino cavity and slowly pull the mold to release the Dinosaur Gummies, and then push from the bottom to pop out the Dinosaur Gummies.

Tip : We have designed our mold with many details to create the most elegant finished product. By increasing the Gelatin from 3 to 5, it makes it much easier to remove the Dinosaur Gummies.