Pikasola Hybrid Wind Controller and Solar Controller for 12V/24V Battery Auto, 30A Hybrid Charge Controller for Off Grid Max 800W Wind Turbine Charge and 1000W Solar Panel with MCT Charging Function.

★(-Scope of use-): Hybrid charge controller 12/24V auto match for max 800w wind generator and max 1000w solar panels for wind&solar complementary system.

★(-Operational system-): The charge controller use PWM technology by MOS tube in series which make solar and wind charge more efficient. Especially MCT charging function tracks the maximum current of the solar panel in real time.

★(-Good Heat Dissipation-)：Wind controller use Aluminum alloy shell with multi-edge bottom plate design , which increase the heat dissipation area. So the controller keep in an optimal heat dissipation state for a long time.

★(-IP67 Waterproof-): The fully waterproof protection which grade reach into IP67. Charge controller for wind and solar can work steadily even in very humid environment.

★(-Protection function-): Over charge voltage/under voltage & Over load voltage Protection, battery reverse connects and open circuit protection, Lightning Protection, etc.

Retail Price: $ 58.99

Wholesale Price: Inquire Now

High-Quality Copper Wire

Wire specification: AWG13 (2.5mm²)

30A Wind Solar Hybrid Controller

Parameter

Protection Class: IP 67

Max Discharging Current：30 A

System voltage: 12/24V auto match for battery

Wind turbine power：400W(12V)/800W(24V)

Solar Panel power:500W(12V)/1000W(24V)

Wind Generator Braking Voltage:14.5V/29V

Wind Generator Recover Voltage:13.2V/26.4V


Indicator light conditions 1. Battery capacity, discharging indicator(light on indicates the battery condition) 2. Battery charging indicator(light on indicates charging) 3. Controller power-on indicator(light on indicates the battery is connected properly) 4. Brake, fault, overcharge, over-discharge protection(light on indicates warning condition) 5. Wind turbine charging indicator(light on indicates the wind turbine is working)	Good Waterproof Performance 1.The fully waterproof protection which grade reach into IP67. 2.Charge controller for wind and solar can work steadily even in very humid environment. 3.The wind solar hybrid controller is small size with light weight, easy to install.	Good Heat Dissipation Wind Solar charge controller use Aluminum alloy shell and Therming Dissipine Structure with good heat dissipation. The rectification and brake circuit part has adopted integrated module design, whatever heat dissipation or reliability, all further advanced than the traditional design.

1.(-Scope of use-): Hybrid charge controller 12/24V auto match for max 800w wind generator and max 1000w solar panels for wind & solar complementary system.

2.(-Operational system-): The charge controller use PWM technology by MOS tube in series which make solar and wind charge more efficient. Especially MCT charging function tracks the maximum current of the solar panel in real time.

3.(-Protection function-): Over charge voltage/under voltage & Over load voltage Protection, battery reverse connects and open circuit protection, Lightning Protection, etc.

4.(-Good Heat Dissipation-)：Wind controller use Aluminum alloy shell with multi-edge bottom plate design , which increase the heat dissipation area. So the controller keep in an optimal heat dissipation state for a long time.

Front View

Right Side View

Left Side View

Back Side View

Wiring Instructions:

1. Firstly, connect the positive pole of the load, battery and solar panel to the red line of the controller.

2. Then connect to the load’s yellow wire of the negative pole.

3. Then connect the negative pole of the battery to the black line of the controller.

4. Connect the negative pole of the solar panel to the blue line of the controller

5. Connect the three-phase AC voltage input line of the controller to the three-phase voltage output line(green line )of the wind turbine.

6. After the entire connection is completed, please wrap the connectors with waterproof tape to avoid water ingress.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Pikasola Hybrid Wind Controller and Solar Controller for 12V/24V Battery Auto, 30A Hybrid Charge Controller for Off Grid Max 800W Wind Turbine Charge and 1000W Solar Panel with MCT Charging Function.

BEST SELLERS

Product introduction

Shipping Notices

Product Description

High-Quality Copper Wire

Wire specification: AWG13 (2.5mm²)

30A Wind Solar Hybrid Controller

Parameter

Protection Class: IP 67

Max Discharging Current：30 A

System voltage: 12/24V auto match for battery

Wind turbine power：400W(12V)/800W(24V)

Solar Panel power:500W(12V)/1000W(24V)

Wind Generator Braking Voltage:14.5V/29V

Wind Generator Recover Voltage:13.2V/26.4V


Indicator light conditions 1. Battery capacity, discharging indicator(light on indicates the battery condition) 2. Battery charging indicator(light on indicates charging) 3. Controller power-on indicator(light on indicates the battery is connected properly) 4. Brake, fault, overcharge, over-discharge protection(light on indicates warning condition) 5. Wind turbine charging indicator(light on indicates the wind turbine is working)	Good Waterproof Performance 1.The fully waterproof protection which grade reach into IP67. 2.Charge controller for wind and solar can work steadily even in very humid environment. 3.The wind solar hybrid controller is small size with light weight, easy to install.	Good Heat Dissipation Wind Solar charge controller use Aluminum alloy shell and Therming Dissipine Structure with good heat dissipation. The rectification and brake circuit part has adopted integrated module design, whatever heat dissipation or reliability, all further advanced than the traditional design.

1.(-Scope of use-): Hybrid charge controller 12/24V auto match for max 800w wind generator and max 1000w solar panels for wind & solar complementary system.

3.(-Protection function-): Over charge voltage/under voltage & Over load voltage Protection, battery reverse connects and open circuit protection, Lightning Protection, etc.

Front View

Right Side View

Left Side View

Back Side View

Wiring Instructions:

1. Firstly, connect the positive pole of the load, battery and solar panel to the red line of the controller.

2. Then connect to the load’s yellow wire of the negative pole.

3. Then connect the negative pole of the battery to the black line of the controller.

4. Connect the negative pole of the solar panel to the blue line of the controller

5. Connect the three-phase AC voltage input line of the controller to the three-phase voltage output line(green line )of the wind turbine.

6. After the entire connection is completed, please wrap the connectors with waterproof tape to avoid water ingress.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.