uxcell 4 x 36 Inch 40 Grit Sanding Belt Aluminum Oxide Sand Belts for Belt Sander 4pcs
【4\" x 36\" & 40-Grits】Abrasive sanding belt fits any sander that uses 4\" x 36\" sanding belt,40-grits
【Aluminum Oxide Abrasive Materials】Sand belt sandpaper is with aluminum oxide abrasive materials,sharp and durable,strong grinding
【Compact Interface】The interface of sander belt is tight and compact,so it is not easy to break apart in use,easy to use, long usage life
【Widely Application】Abrasive sand belt use for surface smoothing, removing smaller imperfections and marks on wood, plastic, fiberglass, and both ferrous metal (steel, stainless steel, cast iron, carbon steel) and non-ferrous metals (aluminum, titanium, brass, bronze, copper)
【Pay Attention To】When installing, it is necessary to distinguish the positive and negative directions.Installation according to the installation direction on the back of abrasive belt. Installing the opposite direction will cause problems such as non-wear resistance, band breakage and so on
Coarse grit sandpaper is a good choice for rough sanding and removing layers of old paint quickly, including rough sanding of polyester putty, steel plate and wood material.
Medium Sanding: 120 Grit--600 Grit
Medium grit sandpaper makes a good starting point for most projects, feather sanding, grinding of polyester putty, aluminum plates, fiberglass, metal materials and wall shaping.
Fine Sanding: 600 Grit--1200 Grit
Finer grit sandpaper is great for fine sanding of polyester putty, paint primer and old paint, used for fine grinding and fine shaping of various materials.
Extra Fine Sanding: 1200 Grit--3000 Grit
Extra fine grit sandpaper is used for light sanding between coats of finish and to sand metal, hardwood, stone and other non-metallic materials.
Super Fine Sanding: 3000 Grit--10000 Grit
Super fine grit sandpaper is mainly used for mirror polishing of metal, stone, non-ferrous metal, water-based paint, glass and other objects.
Measurement Methods
After the belt is flattened, the measured length is about half of the total length of the belt. Adding 1/4 "~ 1/2" on this basis is the circumference suitable for the belt sander. The width of the belt is equal to or less than the width of the belt pulley. Or you can choose to cut the used sanding belt to measure.
Note: If the width of the abrasive belt exceeds the width of the grinder pulley, it cannot be used.
Measuring Method of Belt Sander
Please use an inelastic tape or non-shrinkable belt around the belt pulley of the belt sander. As shown in the yellow line, it is the theoretical perimeter.
Coarse grit sandpaper is a good choice for rough sanding and removing layers of old paint quickly, including rough sanding of polyester putty, steel plate and wood material.
Medium Sanding: 120 Grit--600 Grit
Medium grit sandpaper makes a good starting point for most projects, feather sanding, grinding of polyester putty, aluminum plates, fiberglass, metal materials and wall shaping.
Fine Sanding: 600 Grit--1200 Grit
Finer grit sandpaper is great for fine sanding of polyester putty, paint primer and old paint, used for fine grinding and fine shaping of various materials.
Extra Fine Sanding: 1200 Grit--3000 Grit
Extra fine grit sandpaper is used for light sanding between coats of finish and to sand metal, hardwood, stone and other non-metallic materials.
Super Fine Sanding: 3000 Grit--10000 Grit
Super fine grit sandpaper is mainly used for mirror polishing of metal, stone, non-ferrous metal, water-based paint, glass and other objects.
Measurement Methods
After the belt is flattened, the measured length is about half of the total length of the belt. Adding 1/4 "~ 1/2" on this basis is the circumference suitable for the belt sander. The width of the belt is equal to or less than the width of the belt pulley. Or you can choose to cut the used sanding belt to measure.
Note: If the width of the abrasive belt exceeds the width of the grinder pulley, it cannot be used.
Measuring Method of Belt Sander
Please use an inelastic tape or non-shrinkable belt around the belt pulley of the belt sander. As shown in the yellow line, it is the theoretical perimeter.
Use Guide
Please use in the direction of the arrow
Logo
Grit
Measurement
Total Length=Circumference
Width
Measure Methods
Measure Methods
Use Guide
Measurement
Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.