- THICKER FOAM: The foam creator is much longer than that of general foam cannons. It offers enough space and time for orifice nozzle and foam maker to create super thicker clinging foam. Hi-Flow Breather Valve mixes the perfect ratio of air, pressure water and soap.
- HIGHER CAPACITY: Bottle Capacity: 2 Liter / 0.44 Gallon. The capacity is double of general pressure washer foam lance.
- GREATER COMPATIBILITY: Working pressure is from 1000 PSI to 4000 PSI. Max temperature is 140° F. Flow rate is from 1.0 GPM to 5.3 GPM. Snow foam cannon has universal 1/4\" quick disconnection fitting. It fits both electric and gas powered pressure washers.
- MORE ADJUSTABILITY: Foam output can been adjusted by red knob. The foam level is from 0 to 10. “0” means only water without foam. “10” means maximum concentration of foam with least water. The angle can been adjusted by adjustable nozzle.
- SUPERIOR CLEANING: Car wash foam cannon generates a dense clinging foam for extended surface dwell times and more efficient use of detergent. The thick foam pre-saturates debris and dirt to reduce chances of scratches and swirls. Power washer foam cannon is ideal for motorcycle, detailing trucks, SUVs car washing; roofs, driveways, siding washing; floors, windows washing.
Features
1. THICKER FOAM: The foam creator is much longer than that of general foam cannons.
2. HIGHER CAPACITY: Bottle Capacity: 2 Liter / 0.44 Gallon. The capacity is double of general pressure washer foam lance.
3. GREATER COMPATIBILITY: Working pressure is from 1000 PSI to 4000 PSI. Max temperature is 140° F. Flow rate is from 1.0 GPM to 5.3 GPM. It has universal 1/4" quick disconnection fitting.
4. .MORE ADJUSTABILITY: Foam output can been adjusted by red knob. The foam level is from 0 to 10.
5. SUPERIOR CLEANING：Power washer foam cannon is ideal for motorcycle, detailing trucks, SUVs car washing; roofs, driveways, siding washing; floors, windows washing.
How to Install Foam Cannon
1. Fill some soap into the bottle with warm water.
2. Connect 1/4" quick connection plug to pressure washer gun or wand.
3. Adjust the knob to desired foam level and adjust the spray nozzle to desired spray angle. The foam level is from 0 to 10. “0” means only water without foam. "10" means maximum concentration of foam with least water. Unlock trigger gun and it disperses thick foam.
4. After cleaning, please turn the knob to the end of “0” and spray pure water without foam for 10 seconds. It will clean out the remaining soap in the orifice nozzle and foam maker. Or it is easy to be blocked by remaining soap.
Tips
1. We give an extra foam maker to customer. They assembly inside foam cannon for foam generation. They creates thick foam suds that stick to your car.
2. If foam cannon works not very well as before, please clean Foam Volume Control Knob and Foam Maker. If still not work, please replace the Foam Maker.
|
|
|
|
|
|
|---|---|---|---|---|---|
| Pressure Washer Sandblasting Kit 5000 PSI | 1.1 mm Orifice for Foam Cannon and Foam Maker | High Pressure Washer Gun, with Replacement Wand Extension | Foam Cannon Orifice Nozzle Tips | Pivoting Coupler 180 Degree Rotating | |
| Specification | 1/4 Inch Quick Disconnect | 1.1 mm | M22 Fitting | 1.1 mm | 1/4'' Quick Connect |
BEST SELLERS
Product Description
Features
1. THICKER FOAM: The foam creator is much longer than that of general foam cannons.
2. HIGHER CAPACITY: Bottle Capacity: 2 Liter / 0.44 Gallon. The capacity is double of general pressure washer foam lance.
3. GREATER COMPATIBILITY: Working pressure is from 1000 PSI to 4000 PSI. Max temperature is 140° F. Flow rate is from 1.0 GPM to 5.3 GPM. It has universal 1/4" quick disconnection fitting.
4. .MORE ADJUSTABILITY: Foam output can been adjusted by red knob. The foam level is from 0 to 10.
5. SUPERIOR CLEANING：Power washer foam cannon is ideal for motorcycle, detailing trucks, SUVs car washing; roofs, driveways, siding washing; floors, windows washing.
How to Install Foam Cannon
1. Fill some soap into the bottle with warm water.
2. Connect 1/4" quick connection plug to pressure washer gun or wand.
3. Adjust the knob to desired foam level and adjust the spray nozzle to desired spray angle. The foam level is from 0 to 10. “0” means only water without foam. "10" means maximum concentration of foam with least water. Unlock trigger gun and it disperses thick foam.
4. After cleaning, please turn the knob to the end of “0” and spray pure water without foam for 10 seconds. It will clean out the remaining soap in the orifice nozzle and foam maker. Or it is easy to be blocked by remaining soap.
Tips
1. We give an extra foam maker to customer. They assembly inside foam cannon for foam generation. They creates thick foam suds that stick to your car.
2. If foam cannon works not very well as before, please clean Foam Volume Control Knob and Foam Maker. If still not work, please replace the Foam Maker.
|
|
|
|
|
|
|
|---|---|---|---|---|---|
| Pressure Washer Sandblasting Kit 5000 PSI | 1.1 mm Orifice for Foam Cannon and Foam Maker | High Pressure Washer Gun, with Replacement Wand Extension | Foam Cannon Orifice Nozzle Tips | Pivoting Coupler 180 Degree Rotating | |
| Specification | 1/4 Inch Quick Disconnect | 1.1 mm | M22 Fitting | 1.1 mm | 1/4'' Quick Connect |
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
