Supreme Suspensions - 3" Front + 2" Rear Lift for Ford F-250 F-350 [4x4] Steel Spring Spacers + Billet Lift Blocks + U-Bolts + Bump Stop Spacers | PRO KIT for Super Duty with Overload Springs

COMPATIBLE WITH 2005 - 2020 Ford F-250 Super Duty and F-350 Super Duty (4WD). Overload Models Only.

CONTENTS: (2x) High-Strength Steel Spring Spacers, (2x) Front Bump Stop Spacers, (2x) Billet Aluminum Lift Blocks, (4x) Zinc Plated Round Bend U-Bolts, Installation Hardware, Installation Instructions and Supreme Suspensions Pro Pack.

TECHNICAL NOTES: 3 inch front + 2 inch rear suspension leveling lift. *IMPORTANT: Some vehicles come equipped with 2\" or 4\" rear pre-installed factory blocks. Rear Lift height will vary based on size of existing block.

INSTALLATION: Easy bolt-on installation takes 3 to 4 hours without the need for special tools. An alignment is recommended after install.

BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Ensures correct bump stop clearance and prevents suspension from bottoming out.

Retail Price: $ 199.95

Wholesale Price: Inquire Now

3" FRONT + 2" REAR LIFT KIT

Enhance the look of your vehicle and run larger tires with Supreme Suspensions' Full Lift Kit.

Developed and rigorously trialed by in-house engineers, our front spring spacers and rear blocks are precision machined using only the latest in metal fabrication technology.

Each piece is crafted with the optimal material blend for its specific application, ensuring a lifetime of dependability under even the most extreme riding conditions. The included bump stop spacers will ensure correct bump stop clearance and prevent suspension from bottoming out.

After an easy 2-4 hour installation process, you're ready to feature your new and improved ride!

FITMENT:

2005 - 2020 Ford F-250 Super Duty (4WD)
2005 - 2020 Ford F-350 Super Duty (4WD)
Will fit models equipped with Rear Overload Springs.

TECHNICAL NOTES

Front Lift: 3 Inches / Spacer's Thickness: 3 Inches
Rear Lift: 2 Inches* / Block's Specs: 9/16th Pins, 5" Long, 3" Wide
U-Bolt Specs: 17.5" Long, 3.5" Wide, 5/8" Threads

PLEASE CHECK YOUR TRUCK'S SUSPENSION SETUP BEFORE ORDERING!

*Some vehicles come equipped with 2" or 4" rear pre-installed factory blocks. Rear Lift height will vary based on the size of existing block.

Please Note: An alignment is always recommended after altering the height of your vehicle.

BENEFITS

Increase ground clearance
Install larger custom rims & tires
Improve the look of your vehicle
Maintain factory ride quality

(2x) High-Strength Steel Front Spring Spacers
(2x) Rear Lift Blocks
(4x) Round Bend U-Bolts
(2x) Front Bump Stop Spacers
Installation Hardware
Installation Instructions
Supreme Suspensions Pro Pack

T6 BILLET ALUMINUM REAR LIFT BLOCKS

These Rear Lift Blocks equipped with 9/16th Axle Locator Pins install simply and easily by placing the new blocks between your axle and OE leaf pack, and then securing everything together using our provided extended length U-bolts. Each block is Precision CNC Machined from T6 Billet Aluminum and finished with an Anodized Coating to protect them against corrosion and rust.

HIGH-STRENGTH STEEL SPRING SPACERS

We chose to construct these front spring spacers from military grade steel for its excellent strength and resistance to deformation. It is tempered to a yield strength of no less than 60,000 psi, cut & welded through a series of computer controlled processes and coated for a great look and maximum resistance against corrosion and rust.

ZINC PHOSPHATE COATED U-BOLTS

This Kit comes with our newly designed set of zinc phosphate coated U-bolts, five times more corrosion resistant than those with typical zinc plating and stamped to satisfy the highest quality control standards. These U-bolts offer maximum safety by restoring the necessary clamping force on your spring assembly, eliminate flexing of the leaf spring packs and provide the desired spring stiffness for your vehicle.

BUMP STOP SPACERS

Supreme Suspensions Front Spring Spacers are engineered to raise the factory rake of your vehicle, enhancing its look and providing a more aggressive profile. With the increased ground clearance, a casual day on the trail will become less frustrating and more enjoyable.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Supreme Suspensions - 3" Front + 2" Rear Lift for Ford F-250 F-350 [4x4] Steel Spring Spacers + Billet Lift Blocks + U-Bolts + Bump Stop Spacers | PRO KIT for Super Duty with Overload Springs

BEST SELLERS

Product introduction

Shipping Notices

Enhance the look of your vehicle and run larger tires with Supreme Suspension's full lift kit. Developed and rigorously tested by in-house engineers, our front spring spacers and rear blocks are precision machined using only the latest in metal fabrication technology. Each piece is crafted with the optimal material blend for its specific application, ensuring a lifetime of dependability under even the most extreme riding conditions. Included in this kit is our newly designed set of zinc phosphate coated U-bolts, ISO 9001 certified and stamped to satisfy the highest quality control standards. Supreme Suspensions U-bolts are five times more corrosion resistant than those with typical zinc plating, in accordance with ASTM B117 testing. The included bump stop spacers will ensure correct bump stop clearance and prevent suspension from bottoming out.

Product Description

3" FRONT + 2" REAR LIFT KIT

Enhance the look of your vehicle and run larger tires with Supreme Suspensions' Full Lift Kit.

Developed and rigorously trialed by in-house engineers, our front spring spacers and rear blocks are precision machined using only the latest in metal fabrication technology.

After an easy 2-4 hour installation process, you're ready to feature your new and improved ride!

FITMENT:

2005 - 2020 Ford F-250 Super Duty (4WD)
2005 - 2020 Ford F-350 Super Duty (4WD)
Will fit models equipped with Rear Overload Springs.

TECHNICAL NOTES

Front Lift: 3 Inches / Spacer's Thickness: 3 Inches
Rear Lift: 2 Inches* / Block's Specs: 9/16th Pins, 5" Long, 3" Wide
U-Bolt Specs: 17.5" Long, 3.5" Wide, 5/8" Threads

PLEASE CHECK YOUR TRUCK'S SUSPENSION SETUP BEFORE ORDERING!

*Some vehicles come equipped with 2" or 4" rear pre-installed factory blocks. Rear Lift height will vary based on the size of existing block.

Please Note: An alignment is always recommended after altering the height of your vehicle.

BENEFITS

Increase ground clearance
Install larger custom rims & tires
Improve the look of your vehicle
Maintain factory ride quality

(2x) High-Strength Steel Front Spring Spacers
(2x) Rear Lift Blocks
(4x) Round Bend U-Bolts
(2x) Front Bump Stop Spacers
Installation Hardware
Installation Instructions
Supreme Suspensions Pro Pack

T6 BILLET ALUMINUM REAR LIFT BLOCKS

HIGH-STRENGTH STEEL SPRING SPACERS

ZINC PHOSPHATE COATED U-BOLTS

BUMP STOP SPACERS

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.