CCTV Camera Pros VDS-4008HD 4 to 8 BNC Video Splitter Box for AHD, HD-TVI, HDCVI, CVBS HD Analog Security Cameras | 720p, 1080p, 3MP, 4MP, 5MP Resolution | RG59 / RG6U / RG6 Coaxial Cable Compliant

Retail Price: $ 105.0

Wholesale Price: Inquire Now

The VDS-4008HD is a 4 to 8 BNC video splitter that supports AHD, HD-TVI, HDCVI, and analog CCTV security cameras. The following video resolutions are supported: 5 Megapixel, 4 Megapixel, 3 Megapixel, 1080p, 720p, 960H, D1, and CIF. Each of the 4 BNC video inputs is split into 2 BNC outputs. This HD CCTV video splitter is typically used to run video from multiple cameras to two outputs such as monitors and DVRs. The built-in transient voltage suppression (TVS) protects each device from power surges.

VDS-4008HD Features:

Compatible with Analog CCTV Cameras
Compatible with HD over Coax Cameras (AHD, HD-TVI, HDCVI)
CIF, D1, 960H Resolution Support for Analog CCTV Cameras
720p, 1080p, 3 MP, 4MP, 5MP Resolution Support for HD CCTV Cameras
4 BNC Video Inputs - 75Ω
8 BNC Video Outputs - 75Ω
Built-in TVS Protection / Power Surge Protection
12V DC 500mA Power Supply Included
Power Consumption 180mA Max
Dimensions - 133 x 75 x 44mm
Weight - 430 grams / 1 pound

UTC (Up the Coax) Support

Many of the HD security cameras, including PTZ cameras, support "Up the Coax" operations. UTC allows PTZ cameras to be controlled without running any additional cable. The pan, tilt, and zoom functions are communicated by the DVR over the same coax cable as the video. Some non-PTZ cameras that have an OSD (on-screen display) to configure color, lighting and other settings support UTC to access the on-screen display.

Supports UTC via output one for each input.
UTC is ONLY supported for HD cameras - NOT analog CCTV.
Internal jumpers must be set for UTC mode.

CCTV Video Splitter UTC Control Setup, Up the Coax Video Splitter Support, UTC PTZ Camera Control

How to Setup UTC Controls

First, open the case by removing the 4 screws on the front and the 4 screws on the bottom of the VDS-4008HD. With those 8 screws removed, the board can be slid out of the case. You can see the location of the 4 UTC jumpers in the above image. The position they are in above is video output only mode - no UTC. This is the default from the factory.

Each of the 4 channels can have UTC enabled/disabled.
Video only mode is the default from the factory and shown above in green.
To enable UTC on any channel, change the position of the 2 jumpers associated with that channel. Shown above in orange.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

CCTV Camera Pros VDS-4008HD 4 to 8 BNC Video Splitter Box for AHD, HD-TVI, HDCVI, CVBS HD Analog Security Cameras | 720p, 1080p, 3MP, 4MP, 5MP Resolution | RG59 / RG6U / RG6 Coaxial Cable Compliant

BEST SELLERS

Product introduction

Shipping Notices

Product Description

VDS-4008HD Features:

Compatible with Analog CCTV Cameras
Compatible with HD over Coax Cameras (AHD, HD-TVI, HDCVI)
CIF, D1, 960H Resolution Support for Analog CCTV Cameras
720p, 1080p, 3 MP, 4MP, 5MP Resolution Support for HD CCTV Cameras
4 BNC Video Inputs - 75Ω
8 BNC Video Outputs - 75Ω
Built-in TVS Protection / Power Surge Protection
12V DC 500mA Power Supply Included
Power Consumption 180mA Max
Dimensions - 133 x 75 x 44mm
Weight - 430 grams / 1 pound

UTC (Up the Coax) Support

Supports UTC via output one for each input.
UTC is ONLY supported for HD cameras - NOT analog CCTV.
Internal jumpers must be set for UTC mode.

How to Setup UTC Controls

Each of the 4 channels can have UTC enabled/disabled.
Video only mode is the default from the factory and shown above in green.
To enable UTC on any channel, change the position of the 2 jumpers associated with that channel. Shown above in orange.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.