General information (for the general data):

    Baby gate or child safety gate is a protective barrier designed to prevent babies and toddlers from accessing areas of a home where they might be unsafe, such as stairways and kitchens. Baby gates are typically constructed of metal, plastic and/or wood, and can be expanded to fit in a range of doorway widths. They may be designed for use indoors or out, and may be either hardware or pressure-mounted.
    Pressure-mounted gates are typically held in place by friction with the walls on either side, while hardware-mounted gates are screwed into the wall studs and swing fully open like a door. There are hardware-mounted gates that can be customized to fit wide and irregularly shaped openings, as well as mesh retractable gates that roll out of the way.
    Baby gates are also frequently used to contain small pets, especially ones that are not housebroken. 

                  

Easy Installation without Tools:

- Measure distance from gate to a wall, it has to be no more than 75 mm.
- Rotate the adjustment wheels along the threading, eliminating the gap between the adjustmet wheel and the rubber foot. 
- Insert the 4 threaded spindle rods into the holes at each of the 4 corners of the gate. 4. Position the gate so that it is level and centered within your doorway or opening. Rotate the adjustment wheels on the threaded spindle rods in the opposite direction, expanding the gap between the rubber foot and the adjustment wheel.  
Expand each of the 4 threaded spindle rods until they make contact with the doorway or opening. Do not fully tighten the threaded spindle rods yet. 

PAY ATTENTION - baby gate or wall saver pads in this package not included! 

Here you can buy only Threaded Spindle Rods for Pressure Mounted Baby Gates! (4 pcs)