1. Create your design. Cut with the gloss side facing DOWN and the duller back of the red htv vinyl bundle facing up.
2. Weed away the excess red vinyl, leaving your design on the carrier sheet.
3. Apply the design to your T-shirt with heat press at 305℉-320℉ for 10-15 seconds, if you use a home iron, press it with firm pressure.
4. Peel the carrier sheet cold, if areas of design lift after application, do step 3 again.
Cutting Settings:
Cricut: Blade: Standard / Setting: Iron on. Silhoutte Cameo: Blade: 10 / Speed: 5 / Force: 5 / Passes: 2 / Material: Smooth.
Home Iron:
1. Set iron dial between cotton and wool.
2.Cover design with Teflon sheet.
3.Place on a flat,hard surface (ironing board not recommended).
4.Press iron with medium/firm pressure (do not slide iron).
5.Press each section of the design for 10-15 seconds.
6.If areas of design lift after application, apply cover sheet and repress for 10-15 seconds.
7.Peel carrier cold.
8.Cover completed design and press for 5-10 seconds.