WINSOON 4FT-18FT Modern Sliding Bypass Barn Door Hardware 304 Stainless Steel Double Doors Kit Cabinet Closet System Silver (10FT Bypass Hardware Kit)

√BRAND: WINSOON; Condition: 100% New; Material: 304 Stainless Steel; Surface: Drawing, Water Proof, Rust Proof; Door Weight Capacity: 230 lbs each door; Fit 2 door panel width: 60\"each door; Perfect for door panel thickness: 1 3/8\" to 1 3/4\"

√4-PIECE Rail: 4 piece 5 FT/60\" rail and 2 track connectors are included in the package. Much easier to install. Others provide 6 or 8 short tracks and then connect them with track connectors, which is structurally less strong, more difficult to install.

√PACKAGE INCLUDE：4x5FT Rail,2xJunction Plate, 24xRail Support,4xRoller,4xDoor Stopper,4xAnti-Pad,2xDoor Guide,1xHex Wrench; All other necessary hardware is included as you see in the pictures. The track has been predrilled holes for 16 inch wall stud; ONLY the hardware is for sale, DOOR IS NOT INCLUDED.

√INSTRUCTIONS：Very detailed and visual instruction. Based on our own installation experience, We write the instuction, it explains every step with words and picture and all data is measured in inch. It is very easy for you to take a reference during the installation.

√100% MONEY-BACK GUARANTEE - The product comes with 5 year factory warranty. WINSOON is the manufacture of the sliding door hardware. If you are not satisfied with this product, we can provide you the USA return address.And if there is any part missed or defectived during shipping, please let us know, we will send replacement at no charge for the missing or defect parts at the first time.

size:

10FT Bypass Hardware Kit

Retail Price: $ 264.99

Wholesale Price: Inquire Now

WINSOON 10ft stainless steel double track bypass barn door hardware kit for double doors (doors not include)

double track bypass barn door hardware 5FT


Pre-purchase Information Doors are not included, only the hardware kit is for sale. You will need 13" clearance from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly. Fit for door panel thickness: 1-3/8" to 1-3/4". This double track bypass hardware kit can hold 230lbs door both on the inside and outside track. The gap between door and wall is 5/8" and between door and door is 2" based on 1-1/2" thick door.	Safety Assurance Measures Support Bracket: It is made by solid 1/4" thick stainless steel, surper solid and steady. Four 5ft Rails: The 10ft Rail is connected by two 5ft rails, made by solid 1/4" thick stainless steel coming with pre-drilled holes of 16 inch spacing, stainless finished. Hangers: The strap of the hanger is made by 1/4" thick stainless steel and the wheel is made by POM nylon, very durable, quiet and smooth. Rail Supporter: With lag bolts and the spacers, the rail can be securely attached to the studs and can hold 230lbs comfortably. Our bolts can be used to both wooden wall and concrete wall. Door Stops: You could install it to anywhere of the rail, and they're cushioned by rubber caps for a quiet close.	T Floor Guide Floor Guide: T-shaped floor guide is supplied (with screws) to prevent the door from swinging out or up against the baseboard. Note: You will need to open a slot on the bottom of your doors. If you do not want to open a slot, we could provide other type floor guides, please let us know it.

10ft Bypass barn door hardware kit accessories

Packing List:

4 x 5FT Track: Made the 10ft rails by junction plates

4 x Steel Hanger: For use with door

4 x Door Stopper: Keep hangers on track

24 x Track & Wall Connector: Mount track to wall

8 x Pair of Brackets: Hold the outside track

8 x Bracket & Track Screws: Mount track to the Bracket

2 x Floor Guide: Keep door in its position

4 x Anti-Jump Pad: prevent door from falling down

1 x Hex Wrench: Help you assemble your parts

1 x Bypass Barn Door Hardware Installation Manual: Very smooth with photos and text, help you install your barn door easily,


Q: How do I know the length of track I need for my opening? A: Usually track length should be equal to your total two doors width or opening. For example, if you have two doors that are each 30'' wide. You will need 2x 30''= 60'' long track. Or if you have a opening that is 78'' wide, you will need at least 78'' long track. Q: Can I cut the rail to fit my wall? A: Yes, the rail can be cut to any length. We recommend using an angle grinder to cut the rail.	Q: What hardware is required if I want to install more doors? A: You just need to buy an extra set of hangers and make sure they are the same as the hanger in barn door hardware set (ASIN: B07MLZ2P3K). Q: What is the weight capacity? A: Your door limited 230lbs. Q: What is the compatible door thickness? A: 1-3/8" ~ 1-3/4". Note: If you have door thickness that falls out of this range, please let us know your exact door thickness so that we can put shorter hex bolts for your thinner doors or longer hex bolts and spacer extenders for your thicker doors.	Q: What is the minimum clearance required above door? A: At least 13". Q: When do I need a headboard?? a. If the pre-drilled holes in the rail don't line up with your wall studs. b. If there is a doorway trim. Attach a header board with the same thickness as your doorway trim into your studs first, and then mount the rail onto the header board.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

WINSOON 4FT-18FT Modern Sliding Bypass Barn Door Hardware 304 Stainless Steel Double Doors Kit Cabinet Closet System Silver (10FT Bypass Hardware Kit)

BEST SELLERS

Product introduction

Shipping Notices

Product Description

WINSOON 10ft stainless steel double track bypass barn door hardware kit for double doors (doors not include)


Pre-purchase Information Doors are not included, only the hardware kit is for sale. You will need 13" clearance from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly. Fit for door panel thickness: 1-3/8" to 1-3/4". This double track bypass hardware kit can hold 230lbs door both on the inside and outside track. The gap between door and wall is 5/8" and between door and door is 2" based on 1-1/2" thick door.	Safety Assurance Measures Support Bracket: It is made by solid 1/4" thick stainless steel, surper solid and steady. Four 5ft Rails: The 10ft Rail is connected by two 5ft rails, made by solid 1/4" thick stainless steel coming with pre-drilled holes of 16 inch spacing, stainless finished. Hangers: The strap of the hanger is made by 1/4" thick stainless steel and the wheel is made by POM nylon, very durable, quiet and smooth. Rail Supporter: With lag bolts and the spacers, the rail can be securely attached to the studs and can hold 230lbs comfortably. Our bolts can be used to both wooden wall and concrete wall. Door Stops: You could install it to anywhere of the rail, and they're cushioned by rubber caps for a quiet close.	T Floor Guide Floor Guide: T-shaped floor guide is supplied (with screws) to prevent the door from swinging out or up against the baseboard. Note: You will need to open a slot on the bottom of your doors. If you do not want to open a slot, we could provide other type floor guides, please let us know it.

Packing List:

4 x 5FT Track: Made the 10ft rails by junction plates

4 x Steel Hanger: For use with door

4 x Door Stopper: Keep hangers on track

24 x Track & Wall Connector: Mount track to wall

8 x Pair of Brackets: Hold the outside track

8 x Bracket & Track Screws: Mount track to the Bracket

2 x Floor Guide: Keep door in its position

4 x Anti-Jump Pad: prevent door from falling down

1 x Hex Wrench: Help you assemble your parts

1 x Bypass Barn Door Hardware Installation Manual: Very smooth with photos and text, help you install your barn door easily,


Q: How do I know the length of track I need for my opening? A: Usually track length should be equal to your total two doors width or opening. For example, if you have two doors that are each 30'' wide. You will need 2x 30''= 60'' long track. Or if you have a opening that is 78'' wide, you will need at least 78'' long track. Q: Can I cut the rail to fit my wall? A: Yes, the rail can be cut to any length. We recommend using an angle grinder to cut the rail.	Q: What hardware is required if I want to install more doors? A: You just need to buy an extra set of hangers and make sure they are the same as the hanger in barn door hardware set (ASIN: B07MLZ2P3K). Q: What is the weight capacity? A: Your door limited 230lbs. Q: What is the compatible door thickness? A: 1-3/8" ~ 1-3/4". Note: If you have door thickness that falls out of this range, please let us know your exact door thickness so that we can put shorter hex bolts for your thinner doors or longer hex bolts and spacer extenders for your thicker doors.	Q: What is the minimum clearance required above door? A: At least 13". Q: When do I need a headboard?? a. If the pre-drilled holes in the rail don't line up with your wall studs. b. If there is a doorway trim. Attach a header board with the same thickness as your doorway trim into your studs first, and then mount the rail onto the header board.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.