How to Connect the LED Strip Lights?
Step 1: Connect the IR connectors of the strip and the controller box arrow to the positive ”+” of lights.
Step 2: Make sure the lights are connected, and the power light up green bulb.
Step 3: Pull out the transparent chip from the button of the IR remote.
Step 4: Use the IR remote turn on the lights (IR remote aim at the IR receiver).
Attentions:
1. The arrows should be connected on the same line. If not, it won’t work. Do not roll the light when using.
2. Although the led strip is waterproof, the power and controller are not waterproof. For safety reasons, Please hide the controller and power supply away from the water during use.
3. Cut the light at the cut marks. Please make sure the power off first, then cut the light strip. And if you cut them, you will need one more power adapter to light it up. Please note.