EPEVER DuoRacer MPPT Dual Battery Solar Charge Controller 30 amp 12V 24V Auto - Negative Ground Solar Controller for RVs Caravans Boats fit for Lithium, Sealed, Gel, Flooded Battery

Retail Price: $ 129.98

Wholesale Price: Inquire Now

EPEVER DuoRacer MPPT Dual Battery Solar Charge Controller 30 amp 12V 24V Auto, Negative Ground Solar Controller for RVs Caravans Boats

Features

Warm tips: We strongly recommend connecting a fuse directly to the battery to any short circuit at the battery wiring.,se only insulated tools.

COMMON NEGATIVE - Advanced MPPT control algorithm to minimize the MPP lost rate and lost time
The wider range of the MPP operation voltage to improve the PV module utilization
Fit 5 charging options: LiFePO4, Li-NiCoMn, Sealed, Gel, Flooded, User battery.
Auto control function of charging power & charging current limitation (BATT1)
3-stage ( Bulk, Constant ( Boost, Equalizer), Floate ) charging mode to enhance BATT1 life.
Accurately recognizing and tracking of multiple power points. Real-time energy recording and statistical.
High quality and low failure rate components of ST, TI and Infineon to ensure the product life
Battery temperature compensation function to ensure the controller’s life.
This controller runs into the low-power mode when there is no manual operation for a long time, and charging conditions are not satisfied (PV<5V).
Standard Modbus protocol, and RS485 (5V/200mA) communication port for the via Remote Meter MT11 / Phone APP / PC software.

Electronic Protect Functions:

PV reverse polarity / PV short circuit / PV over current alarm protection
Battery overcharge /Battery over discharge / Battery reverse polarity protection
Load short circuit / Load overload protection / Overheating protection

Negative Ground EPEVER MPPT Charge Controller

System voltage: 12V /24VDC Auto
Rated charge/discharge current: 30A
Max Input Power: 390WO(12V) / 780W (24V)
Max. PV Open Circuit voltage: 100V
Battery type: LiFePO4, Li-NiCoMn, Sealed, Gel, Flooded, User

LCD Display

PV ( Voltage, Current, Kwh ), One key to zero clearing PV energy function.
BAT (Voltage, Current, Temperature ), Temp. compensation:-3mV/℃/2V(77℉) (default)

epever mppt solar charge controller 30a 12V

COMMON NEGATIVE

Ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding

Terminal: 6AWG /16mm2 (BATT1), 12AWG / 4mm2 (BATT2), Recommended cable size: 8AWG/6mm2 (BATT1),12AWG/4mm2(BATT2)
Red wire connect “+” and Black wire connect “-”, Ensure tighten wires
Dimensions: 9.73 X 6.5 X 2.7 in / Weight: 3.85lb
ASIN: B085H9W3FF Package including: 1X 30A MPPT Dual Battery Charge Controller • 1XRemote Meter MT11 • 1X Temperature Sensor • 1X English Manual
ASIN: B08534T16Q Package including: 1X 30A MPPT Dual Battery Charge Controller • 1X Temperature Sensor • 1X English Manual

TIPS

Always connect battery first!!! Make sure enough batteries’ voltage let controller recognize the right system voltage.
DO NOT connect any Inverter / wind / Alternator or Charger into the charge controller! connect the Inverter directly to the battery.
Ensures solar input voltage higher 3V or more than batteries’ voltage and total input power in the range. the charging current almost be zero when controller is floating charge.
Parameter Setting Rules: Floating voltage > Low voltage reconnect > Low voltage discharge.
The solar controller will stop output when the battery under 10.7V (adjustable).The LCD will be blank when the battery under 8V and it will re-output when the battery up to the 12.6V (adjustable).
Install the Charger controller to the battery as close as possible to avoid voltage and power dropping caused by overlong wire and affect normal voltage judgment.
Remove all the debris around the controller(leaving a space of approx. 5.91in)

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

EPEVER DuoRacer MPPT Dual Battery Solar Charge Controller 30 amp 12V 24V Auto - Negative Ground Solar Controller for RVs Caravans Boats fit for Lithium, Sealed, Gel, Flooded Battery

BEST SELLERS

Product introduction

Shipping Notices

Product Description

EPEVER DuoRacer MPPT Dual Battery Solar Charge Controller 30 amp 12V 24V Auto, Negative Ground Solar Controller for RVs Caravans Boats

Features

Warm tips: We strongly recommend connecting a fuse directly to the battery to any short circuit at the battery wiring.,se only insulated tools.

COMMON NEGATIVE - Advanced MPPT control algorithm to minimize the MPP lost rate and lost time
The wider range of the MPP operation voltage to improve the PV module utilization
Fit 5 charging options: LiFePO4, Li-NiCoMn, Sealed, Gel, Flooded, User battery.
Auto control function of charging power & charging current limitation (BATT1)
3-stage ( Bulk, Constant ( Boost, Equalizer), Floate ) charging mode to enhance BATT1 life.
Accurately recognizing and tracking of multiple power points. Real-time energy recording and statistical.
High quality and low failure rate components of ST, TI and Infineon to ensure the product life
Battery temperature compensation function to ensure the controller’s life.
This controller runs into the low-power mode when there is no manual operation for a long time, and charging conditions are not satisfied (PV<5V).
Standard Modbus protocol, and RS485 (5V/200mA) communication port for the via Remote Meter MT11 / Phone APP / PC software.

Electronic Protect Functions:

PV reverse polarity / PV short circuit / PV over current alarm protection
Battery overcharge /Battery over discharge / Battery reverse polarity protection
Load short circuit / Load overload protection / Overheating protection

Negative Ground EPEVER MPPT Charge Controller

System voltage: 12V /24VDC Auto
Rated charge/discharge current: 30A
Max Input Power: 390WO(12V) / 780W (24V)
Max. PV Open Circuit voltage: 100V
Battery type: LiFePO4, Li-NiCoMn, Sealed, Gel, Flooded, User

LCD Display

PV ( Voltage, Current, Kwh ), One key to zero clearing PV energy function.
BAT (Voltage, Current, Temperature ), Temp. compensation:-3mV/℃/2V(77℉) (default)

COMMON NEGATIVE

Ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding

Terminal: 6AWG /16mm2 (BATT1), 12AWG / 4mm2 (BATT2), Recommended cable size: 8AWG/6mm2 (BATT1),12AWG/4mm2(BATT2)
Red wire connect “+” and Black wire connect “-”, Ensure tighten wires
Dimensions: 9.73 X 6.5 X 2.7 in / Weight: 3.85lb
ASIN: B085H9W3FF Package including: 1X 30A MPPT Dual Battery Charge Controller • 1XRemote Meter MT11 • 1X Temperature Sensor • 1X English Manual
ASIN: B08534T16Q Package including: 1X 30A MPPT Dual Battery Charge Controller • 1X Temperature Sensor • 1X English Manual

TIPS

Always connect battery first!!! Make sure enough batteries’ voltage let controller recognize the right system voltage.
DO NOT connect any Inverter / wind / Alternator or Charger into the charge controller! connect the Inverter directly to the battery.
Ensures solar input voltage higher 3V or more than batteries’ voltage and total input power in the range. the charging current almost be zero when controller is floating charge.
Parameter Setting Rules: Floating voltage > Low voltage reconnect > Low voltage discharge.
The solar controller will stop output when the battery under 10.7V (adjustable).The LCD will be blank when the battery under 8V and it will re-output when the battery up to the 12.6V (adjustable).
Install the Charger controller to the battery as close as possible to avoid voltage and power dropping caused by overlong wire and affect normal voltage judgment.
Remove all the debris around the controller(leaving a space of approx. 5.91in)

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.