Sparkle Stripe Multi HTV Iron-on Holographic Heat Transfer Vinyl Product Details: 1.12" x 20" (30 x 50cm) 2 Sheets/Bundle Holographic Sparkle Glitter Stripe Multi 2.Thickness:0.08mm PET Liner:0.1mm Peel Method: Cool Peel 3.Adheres to: Cotton,Uncoated Polyester,Cotton Blends Fabric Do not use nylon, velvet, acrylic fabrics, leather, vinyl which will melt and ruin the material. 4.Perfectly transfer your favorite design images to T-shirts,DIY party clothing,garments, bags and other fabrics. How to use: 1.Compatible with Craft Cutters, Die Cutters, Sign Plotters,etc. 2.Mirror/Reverse your image design. 3.Place vinyl (gloss side) onto cutting mat 4.Before cutting, Remember to adjust proper blade speed and cutting pressure(Blade 2). 5.Weed all of the excess slowly, leave the delicate design letters or graphics. 6.Make sure the finished product facing the right way once ironed onto your fabric. 7.Lay out the fabric.Place the t-shirt or fabric on a hard, flat clean dry surface. 8.Place a cardboard to protect transferred image onto both sides of t-shirt. 9.Set a heat press machine from 155-160 Degrees Celsius 10.Press it only for 10-12 seconds at medium pressure. 11.Iron on the vinyl gloss side. Do not use steam iron. 12.Disperse the iron's heat evenly.Be sure to consistently apply pressure so the complete image is fully attached and prevent scorching the paper and cracking the image. 13. Wait for the vinyl to cool and gently peel off backing after few minutes. Care Instructions: Hand wash your fabric gently with mild detergent Wait 24 hours after application to wash Turn the article of clothing inside before you wash it. No bleach Tips: Be careful not to burn yourself with the iron, and never leave an iron on unattended. We recommend you to perform a test prior.