Vantrue 11.5ft Type C USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for N4, N2S Dash Cam

['【Compatible 12 – 24V Vehicles】This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 – 24V.', '【24/7 Parking Surveillance】Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.', "【ACC mode with Switch Button】With the switch button, you can easily set the hardwire kit to ACC mode, so it can turn on and off with the ignition and you don't have to worry about plugging in the charger, or turning the dashcam on, or any such stuff.", '【Low voltage protection】It has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.6V or 23.2V, thus preventing it draining the battery.', "【Mulitiple uses】Type C USB plug compatible with all Type C dash cams, GPS navigator and radar detector etc, it always frees up the cigarette lighter for other devices. Please note: It doesn't work for other Vantrue Dash Cams, it only work for N4 and N2S, T3 dash cam.

Retail Price: $ 18.99

Wholesale Price: Inquire Now


24/7 Parking Surveillance Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot. Directly to the ignition wire for power only so it can turn on and off with the ignition.	Compatible 12 – 24V Vehicles This hardwire kit accepts voltage from any type of vehicles runs on 12 – 24V, works perfect for car, truck, bus, suvs, or big rig for continuous power.	Low Voltage Protection Smart low voltage protection automatically shut off the power to your dash cam when the battery voltage drops to 11.6V(12V cars) or 23.2V(24V cars), thus preventing it draining the battery.


Find the Correct Fuse Slot Open the fuse box, find the correct fuse slot for your hardwire kit. If you need to find an ignition switched fuse, put the key in the vehicle, find the fuse which is not lit up while the car is off, and test it by turning the car on to see if it lights up. If your kit requires constant power, turn off the car and remove the key to see which fuse slots stays lit on.	Connect the Red Wire Once you've determined which fuse slots you need to use for your hardwiring kit you can crimp the red wire of your hardwire kit onto the Add-A-Fuse. Gently remove the fuse you identified. Install the fuse you just removed into the installation kit add-a-fuse circuit. Plug the add-a-circuit into the fuse box in the correct orientation.	Ground the Hardwiring Kit Slip the black wire (which is in the shape of a C) under a metal bolt or screw in your vehicle (this is the ground wire). Check that it is not attached onto plastic parts. You will typically need a socket wrench to loosen the nut or bolt that you choose to ground with. To attach the grounding terminal, loosen the nut or bolt enough to slip it in and tighten it back up afterwards.

Key Features

Compatible with 12-24Vdc for car or truck installations.
Perfect for 24/7 Parking Surveillance.
Low voltage protection protects against battery dying.
Works well with Vantrue N4 dash cam and all the other type c usb dash cams!
Keep 12V or 24V outlet free, charge your phone at the same time.
Less static when you’re listening to the radio. Less Complicated Install with the installation video.

What’s in the box?

Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with User Manual
Mini/LP ACN Add-A-Circuit Fuse Holder
Mini ACS Add-A-Circuit Fuse Holder
ATO ACU Add-A-Circuit Fuse Holder
Micro2 Add-A-Circuit Fuse Holder

Technical Details

Connector: Type C USB Connector
Input Voltage: DC 12V-24V
Output Voltage: 5V
Output Current: 2A
Working Temperature: -22°F to 167°F (-30°C to 75°C)
Cable Length: 11.5ft
Low Voltage Protection: 11.6V for 12V vehicle; 23.2V for 24V vehicle.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Vantrue 11.5ft Type C USB 12V 24V to 5V Dash Cam Hardwire Kit with Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection for N4, N2S Dash Cam

BEST SELLERS

Product introduction

Shipping Notices

Key Features:
Compatible with 12-24Vdc for car or truck installations.
Perfect for 24/7 Parking Surveillance.
Low voltage protection protects against battery dying.
Works well with Vantrue N4 Dash Cam and all the other type C dash cams on the market!
Keep your 12V or 24V outlet free, charge your phone at the same time.
Less static when you're listening to the radio.
Less Complicated Install with the installation video.

Technical Details:
Connector: Mini USB Connector
Input Voltage: DC 12V-24V
Output Voltage: 5V
Output Current: 2A
Working Temperature: -22°F to 167°F (-30°C to 75°C)
Cable Length: 11.5ft
Low Voltage Protection: 11.6V for 12V vehicle; 22.8V for 24V vehicle.

What's in the box
1. Type C USB Dash Cam Hardwire Kit
2. Mini/LP ACN Add-A-Circuit Fuse Holder
3. Mini ACS Add-A-Circuit Fuse Holder
4. ATO ACU Add-A-Circuit Fuse Holder
5. Micro2 Add-A-Circuit Fuse Holder

Two different ways to hardwire according to your need:
1, Directly to the battery for constant 24hrs/7days power
2, Directly to the ignition wire for power only so it can turn on and off with the ignition.

Kind Reminder: Please check the installation video below the images, or download the installation user manual on the Technical Specification.

Product Description


24/7 Parking Surveillance Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot. Directly to the ignition wire for power only so it can turn on and off with the ignition.	Compatible 12 – 24V Vehicles This hardwire kit accepts voltage from any type of vehicles runs on 12 – 24V, works perfect for car, truck, bus, suvs, or big rig for continuous power.	Low Voltage Protection Smart low voltage protection automatically shut off the power to your dash cam when the battery voltage drops to 11.6V(12V cars) or 23.2V(24V cars), thus preventing it draining the battery.


Find the Correct Fuse Slot Open the fuse box, find the correct fuse slot for your hardwire kit. If you need to find an ignition switched fuse, put the key in the vehicle, find the fuse which is not lit up while the car is off, and test it by turning the car on to see if it lights up. If your kit requires constant power, turn off the car and remove the key to see which fuse slots stays lit on.	Connect the Red Wire Once you've determined which fuse slots you need to use for your hardwiring kit you can crimp the red wire of your hardwire kit onto the Add-A-Fuse. Gently remove the fuse you identified. Install the fuse you just removed into the installation kit add-a-fuse circuit. Plug the add-a-circuit into the fuse box in the correct orientation.	Ground the Hardwiring Kit Slip the black wire (which is in the shape of a C) under a metal bolt or screw in your vehicle (this is the ground wire). Check that it is not attached onto plastic parts. You will typically need a socket wrench to loosen the nut or bolt that you choose to ground with. To attach the grounding terminal, loosen the nut or bolt enough to slip it in and tighten it back up afterwards.

Key Features

Compatible with 12-24Vdc for car or truck installations.
Perfect for 24/7 Parking Surveillance.
Low voltage protection protects against battery dying.
Works well with Vantrue N4 dash cam and all the other type c usb dash cams!
Keep 12V or 24V outlet free, charge your phone at the same time.
Less static when you’re listening to the radio. Less Complicated Install with the installation video.

What’s in the box?

Vantrue 11.5ft Mini USB Dash Cam Hardwire Kit with User Manual
Mini/LP ACN Add-A-Circuit Fuse Holder
Mini ACS Add-A-Circuit Fuse Holder
ATO ACU Add-A-Circuit Fuse Holder
Micro2 Add-A-Circuit Fuse Holder

Technical Details

Connector: Type C USB Connector
Input Voltage: DC 12V-24V
Output Voltage: 5V
Output Current: 2A
Working Temperature: -22°F to 167°F (-30°C to 75°C)
Cable Length: 11.5ft
Low Voltage Protection: 11.6V for 12V vehicle; 23.2V for 24V vehicle.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.