ABN 1/2in Drive Clutch Remover 4-Pin Spanner Socket – 20mm & 24mm Lock Nut Removal Tool for Honda Motorcycle ATV

GET YOUR RIDE RUNNING SMOOTHLY: The ABN Clutch Lock Nut Removal Tool for Honda 20mm & 24mm removes the locknut that holds the centrifugal clutch; Designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch and makes clutch and oil filter pump work a breeze; Comes pre-oiled and has a 1/2-inch drive; We recommend applying lubrication between uses and using a clutch basket holder during removal; Lube, holder, ratchet/impact wrench not included

BUILT TO LAST: Fits nut slots properly and will not deform under load when used properly; Constructed from heat-treated steel for maximum strength and longevity that resists corrosion

EASY STORAGE: Compact 1.4” x 1.4” x 3.25” inch (3.6cm x 3.6cm x 8.3cm) plastic carrying case for easy transportation, safe storage, and quick organization in your toolbox, on your workbench, or on any storage shelf

FITS YOUR APPLICATION: Honda 20mm or 24mm clutch locknut on CRF50, XR200 1980-1984, XR200R 1981-1994, XR250L 1991-1994, XR250R 1986-1994, CL, CT, S, L, XL, SL models, Z50, XR50, ATC70, ATC90, C70, CL70, CRF70, CT70, SL70, TRX70, XL70, XR70, TRX90; 50cc, 70cc, 90cc, 90cc, 110cc, 125cc ATV, dirt bike, go kart; Fits most Chinese brands such as Baja, BMS, BMX, Buyang, Coolsport, Coolster, Hensim, JCL, Jetmoto, Jonway, Kazuma, Kinroad, Lance, NST, Peace, Roketa, SSR, Supermach, TaoTao

DUAL SIZE: Two-sided with 0.8-inch (20mm) inner diameter (ID) (1-inch / 25mm OD) 4-pin spanner on one side and 0.90inch (24mm) inner diameter (ID) (1.2-inch / 30mm OD) 4-pin spanner on the other side; The 4-pin spanner pegs on each end are approximately 0.2-inch (5mm) in diameter and 0.2-inch (5mm) in height

Retail Price: $ 9.49

Wholesale Price: Inquire Now

ABN Clutch Locking Nut Removal Tool 20mm & 24mm banner

About the ABN Clutch Locking Nut Removal Tool 20mm & 24mm

Make clutch changes and oil filter pump work a breeze with the ABN Clutch Locking Nut Removal Tool 20mm & 24mm.

*Oil lubrication, clutch basket holder, ratchet/impact wrench recommended, not included.


GET YOUR RIDE RUNNING SMOOTHLY This tool fits the nut to remove the locking nuts and clutch plates. It is suitable for use on Honda motorcycles with 20mm or 24mm lock nuts and has a deep 1/2-inch socket drive that requires an extension to attach to your existing ratchet or impact wrench of your choice.	SAME AS BOLT SIZE Measure the clutch retaining bolt and make sure that the 4-pin spanner peg fingers on the tool match the distances on the bolt.	DUAL SIZE FITS YOUR APPLICATION It is designed to work for a range of applications and fits Honda 20mm or 24mm clutch locknuts.

Who We Are

Auto Body Now is a family owned company based out of South Dakota. We have an exceptionally strong Internet presence, sending out over 50,000 products each month. In fact, if you have purchased any of your auto body supplies or car care supplies online, there is a good chance we have had the opportunity to serve you.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

ABN 1/2in Drive Clutch Remover 4-Pin Spanner Socket – 20mm & 24mm Lock Nut Removal Tool for Honda Motorcycle ATV

BEST SELLERS

Product introduction

Shipping Notices

Product Description

About the ABN Clutch Locking Nut Removal Tool 20mm & 24mm

Make clutch changes and oil filter pump work a breeze with the ABN Clutch Locking Nut Removal Tool 20mm & 24mm.

*Oil lubrication, clutch basket holder, ratchet/impact wrench recommended, not included.


GET YOUR RIDE RUNNING SMOOTHLY This tool fits the nut to remove the locking nuts and clutch plates. It is suitable for use on Honda motorcycles with 20mm or 24mm lock nuts and has a deep 1/2-inch socket drive that requires an extension to attach to your existing ratchet or impact wrench of your choice.	SAME AS BOLT SIZE Measure the clutch retaining bolt and make sure that the 4-pin spanner peg fingers on the tool match the distances on the bolt.	DUAL SIZE FITS YOUR APPLICATION It is designed to work for a range of applications and fits Honda 20mm or 24mm clutch locknuts.

Who We Are

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.