- The Intelligent Laser Sensing Target has three training modes to meet the shooter different training needs and improve their shooting speed and accuracy.
- The Intelligent Laser Sensing Target will display the hit time and times when it is hit in target area. It’s very convenient for shooters to view the shooting results directly.
- The intelligent laser sensing target has built-in audio, simulated shooting scene, bringing better shooting experience to shooters.
- How to Install: Place on the table; Secured with a tripod（screw hole is 1/4 inch）; Wall-mount.
- The Intelligent Laser Sensing Target can be used in conjunction with laser simulator, 9mm laser training tube, laser training bullets and other laser simulation equipment.
SPECIAL PIE
Intelligent Laser Sensing Target
The Intelligent Laser Sensing Target can be used in conjunction with L17 laser simulator, LN-9 9mm laser training tube, SP laser training bullets and other laser simulation equipment. It has three training modes to meet the shooter different training needs and improve their shooting speed and accuracy.
Product list
J10C * 1
Manual * 1
Package Box * 1
Power Supply
1. 4pcs Brand new AA battery or mobile power supply
Security Statement
Pay attention to confirm firearms that is refitted to laser shooting simulator be safe before you can use it.
Power on and off
1. Power On: press power button for 3 secs to power on.
2. You can use it after the boot music ends.
3. Follow the voice prompts to start shooting after shoot the START/STOP area in
the lower left corner by laser shooting simulator.
4. Turn Off: press power button for 3 secs to turn off.
Sound Settings
1. Long press the mute button to switch the mute switch.
2. The volume can be adjusted, divided into two levels.
Adjustment method: Short press the power button 3 times to adjust the
volume to the first level. If you are not satisfied, short press 3 times again to
adjust.
3. Short press the mute button on the main interface to view the shooting
time of each shot.
Sensitivity Setting
If you find that the receiving laser signal of J10c is not sensitive in use, please
adjust the sensitivity level to L in the following steps.
1. Short press the power button once to adjust the sensitivity.
2. The sensitivity is divided into two levels, S and L. The default level is S, and it is
more sensitive to receive laser signals after adjusting to L.
Training Modes Setting
1. Setting method
Short press the mode button to cycle setting modes, 3 modes in total.
2. Introduction of 3 modes
Mode 1: Time synchronization, all targets go up simultaneously, each target is limited to max. 99 shots within 99secs.
Mode 2: Time synchronization, all targets go up simultaneously, each target can only be shot twice.
Mode 3: It is also called smart target system mode. When 3 or more targets are put together (within 50 meters), they will automatically get connected after being turned on, and then set to the mode 3 according to the following steps, each time there will be 2 targets light up and wait to be shot, and so on.
Training Modes Setting
3. Multi-target Setting( Mode 3)
-Long press menu button to enter setting mode to set chan(channel), add(address), No(number),NU(total number of target)
-Press the switch button to switch and press “+”to add number in current option.
-Long press menu button to exit after setting.
Remark: Parameters setting, including address and number are only effective in local target .Other data(including channel, address, total number of targets and mode) will synchronize to other targets.
4. Group setting method of the targets
J10C contains 3 channels (groups): 01, 02, 03. If you have multiple targets and want to group them, please do as follows:
A. Turn off all the targets in other groups first.
B. Randomly find one from the current group of targets and set its group channel to 01, and the other targets will automatically synchronize.
C. Then modify the number of each target in the current group one by one, which are 01, 02, 03, and so on.
Compatible Products
|
|
|
|
|---|---|---|
L17 Laser Shooting SimulatorL17 laser pistol has the function of electric recoil, electric magazine, last round hold open and trigger wall, designed for dry fire practice, including laser pistol*1, magazine*1. |
LN-9 9mm Laser Training TubeDesigned for 9mm firearm, low-cost refitted laser tube, easy to be installed in the gun. |
SP Laser Training BulletIf you find that the receiving laser signal of J10c is not sensitive in use, please adjust the sensitivity level to L in the following steps. |
BEST SELLERS
Product Description
SPECIAL PIE
Intelligent Laser Sensing Target
The Intelligent Laser Sensing Target can be used in conjunction with L17 laser simulator, LN-9 9mm laser training tube, SP laser training bullets and other laser simulation equipment. It has three training modes to meet the shooter different training needs and improve their shooting speed and accuracy.
Product list
J10C * 1
Manual * 1
Package Box * 1
Power Supply
1. 4pcs Brand new AA battery or mobile power supply
Security Statement
Pay attention to confirm firearms that is refitted to laser shooting simulator be safe before you can use it.
Power on and off
1. Power On: press power button for 3 secs to power on.
2. You can use it after the boot music ends.
3. Follow the voice prompts to start shooting after shoot the START/STOP area in
the lower left corner by laser shooting simulator.
4. Turn Off: press power button for 3 secs to turn off.
Sound Settings
1. Long press the mute button to switch the mute switch.
2. The volume can be adjusted, divided into two levels.
Adjustment method: Short press the power button 3 times to adjust the
volume to the first level. If you are not satisfied, short press 3 times again to
adjust.
3. Short press the mute button on the main interface to view the shooting
time of each shot.
Sensitivity Setting
If you find that the receiving laser signal of J10c is not sensitive in use, please
adjust the sensitivity level to L in the following steps.
1. Short press the power button once to adjust the sensitivity.
2. The sensitivity is divided into two levels, S and L. The default level is S, and it is
more sensitive to receive laser signals after adjusting to L.
Training Modes Setting
1. Setting method
Short press the mode button to cycle setting modes, 3 modes in total.
2. Introduction of 3 modes
Mode 1: Time synchronization, all targets go up simultaneously, each target is limited to max. 99 shots within 99secs.
Mode 2: Time synchronization, all targets go up simultaneously, each target can only be shot twice.
Mode 3: It is also called smart target system mode. When 3 or more targets are put together (within 50 meters), they will automatically get connected after being turned on, and then set to the mode 3 according to the following steps, each time there will be 2 targets light up and wait to be shot, and so on.
Training Modes Setting
3. Multi-target Setting( Mode 3)
-Long press menu button to enter setting mode to set chan(channel), add(address), No(number),NU(total number of target)
-Press the switch button to switch and press “+”to add number in current option.
-Long press menu button to exit after setting.
Remark: Parameters setting, including address and number are only effective in local target .Other data(including channel, address, total number of targets and mode) will synchronize to other targets.
4. Group setting method of the targets
J10C contains 3 channels (groups): 01, 02, 03. If you have multiple targets and want to group them, please do as follows:
A. Turn off all the targets in other groups first.
B. Randomly find one from the current group of targets and set its group channel to 01, and the other targets will automatically synchronize.
C. Then modify the number of each target in the current group one by one, which are 01, 02, 03, and so on.
Compatible Products
|
|
|
|
|---|---|---|
L17 Laser Shooting SimulatorL17 laser pistol has the function of electric recoil, electric magazine, last round hold open and trigger wall, designed for dry fire practice, including laser pistol*1, magazine*1. |
LN-9 9mm Laser Training TubeDesigned for 9mm firearm, low-cost refitted laser tube, easy to be installed in the gun. |
SP Laser Training BulletIf you find that the receiving laser signal of J10c is not sensitive in use, please adjust the sensitivity level to L in the following steps. |
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
