- Easy Electronics is the the prequel to Make: Electronics by Charles Platt which was written with the complete beginner in mind to be used with this electronics component pack.
- Electronic Components needed for experiments in Make: Easy Electronics Handbook by Charles Platt conveniently packaged in a custom made fake matchbox which is used an electronics project enclosure in an experiment.
- Components are individually sorted in reusable envelopes printed with identification details including name, electrical schematic diagram symbols, and experiment number references to allow you to quickly find the part you need.
- Designed for the complete beginner in mind the component pack has all of the parts you will need including a mini solder-less breadboard, small incandescent light bulbs, custom jumper wires, large slider switch, 7555 timer circuit, low-current LEDs, low-voltage piezoelectric transducer, a phototransistor, and more!
- Also includes all of the exact 1/4w carbon film resistors, ceramic and electrolytic capacitors, transistors, alligator clip test laeads, battery holders, and batteries you need for the experiments in Easy Electronics.
IT'S OUR KIT IN A BOX!!
Each of our Make: Easy Electronics Kits are unique because each one is handmade. Several of the experiments throughout the book call for a matchbox so we designed our kit to resemble a matchbox. The outer sleeve features a faux scratch surface with the word “MATCHES” on top. Measuring, 5”x3.5”x2.5”, it is small enough so that it fits in a backpack or laptop bag with ease. The interior cardboard portion of the box slides out and houses all of the components which are individually sorted in envelopes.
WHAT'S IN THE BOX?!?
All components are individually bagged in custom printed envelopes. Each envelope has the component name along with the experiment number in which it’s used as well as the components electrical schematic symbol for reinforcement to assist in learning. We also numbered each component on their envelope and provided a checklist for referencing the envelopes and components. This will make Easy Electronics even easier to use while saving you more time for fun and learning!
PROTECHTRADER, I KNOW THEM!
ProTechTrader was honored to be asked to create this kit for Charles Platt's latest work. We were able to create the kit with the exact parts Charles was using while writing the Make: Easy Electronics book. Not only does it have all of the parts necessary to complete the experiments, it has the exact parts the experiments were designed for. We worked daily with Charles refining all of the perfect parts and had multiple custom manufactured components specifically for the projects in Make: Easy Electronics making it a valuable time saver. We are confident that having our kit will make the experiments easier, quicker, and more fun to complete.
WHO'S AN OHM?! AND WHAT'S A FARAD?
We have also taken the guesswork out of the resistors and capacitors. Containing six different values of ¼ carbon film four band resistors as needed by the experiments in the handbook. Also includes electrolytic capacitors and ceramic capacitors each individually package and labeled for your convience. The kit and book are excellent for classroom electronics education, after school STEM programs, as well as beginner hobbiest and enthusiast interested in learning the basic of electronics. Suitable for ages 8 and above.
TIME SAVER CENTRAL!!!
Having the right size jumper wires makes a big difference when you are working with a small breadboard like the ones used so we had our jumper wires not only custom cut but customer color coded as well to match Charles Platt’s experiments. We did the same thing with our custom cut and color coded alligator clips to ensure there’s no confusion as readers complete the experiments throughout up the book. Also included in the kit are multiple battery holders along with batteries, low current LEDS, transistors, photoresistors, a low voltage piezo transducer, a 7555 timer chip, along with a mini solderless breadboard.
BEST SELLERS
Product Description
IT'S OUR KIT IN A BOX!!
Each of our Make: Easy Electronics Kits are unique because each one is handmade. Several of the experiments throughout the book call for a matchbox so we designed our kit to resemble a matchbox. The outer sleeve features a faux scratch surface with the word “MATCHES” on top. Measuring, 5”x3.5”x2.5”, it is small enough so that it fits in a backpack or laptop bag with ease. The interior cardboard portion of the box slides out and houses all of the components which are individually sorted in envelopes.
WHAT'S IN THE BOX?!?
All components are individually bagged in custom printed envelopes. Each envelope has the component name along with the experiment number in which it’s used as well as the components electrical schematic symbol for reinforcement to assist in learning. We also numbered each component on their envelope and provided a checklist for referencing the envelopes and components. This will make Easy Electronics even easier to use while saving you more time for fun and learning!
PROTECHTRADER, I KNOW THEM!
ProTechTrader was honored to be asked to create this kit for Charles Platt's latest work. We were able to create the kit with the exact parts Charles was using while writing the Make: Easy Electronics book. Not only does it have all of the parts necessary to complete the experiments, it has the exact parts the experiments were designed for. We worked daily with Charles refining all of the perfect parts and had multiple custom manufactured components specifically for the projects in Make: Easy Electronics making it a valuable time saver. We are confident that having our kit will make the experiments easier, quicker, and more fun to complete.
WHO'S AN OHM?! AND WHAT'S A FARAD?
We have also taken the guesswork out of the resistors and capacitors. Containing six different values of ¼ carbon film four band resistors as needed by the experiments in the handbook. Also includes electrolytic capacitors and ceramic capacitors each individually package and labeled for your convience. The kit and book are excellent for classroom electronics education, after school STEM programs, as well as beginner hobbiest and enthusiast interested in learning the basic of electronics. Suitable for ages 8 and above.
TIME SAVER CENTRAL!!!
Having the right size jumper wires makes a big difference when you are working with a small breadboard like the ones used so we had our jumper wires not only custom cut but customer color coded as well to match Charles Platt’s experiments. We did the same thing with our custom cut and color coded alligator clips to ensure there’s no confusion as readers complete the experiments throughout up the book. Also included in the kit are multiple battery holders along with batteries, low current LEDS, transistors, photoresistors, a low voltage piezo transducer, a 7555 timer chip, along with a mini solderless breadboard.
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
