Accusize Industrial Tools 10 Pcs Carbide Inserts Apmt1604pder-H2, Cutting Stainless Steel, Pvd Coated, 1056-1604

[]

size:

APMT1604PDER-H2

Retail Price: $ 48.0

Wholesale Price: Inquire Now

10 Pcs/Box Carbide Inserts APKT1604 TiN Coated, 0056-1604

TiAlN Coated, C5 coating grade
Perform heavy duty cutting, such as stainless steel.
Nose Angle: 85°
Relief Angle: 11°
Nose radius: 1/32"
Good for both finishing and roughing
Dual-edge
Used for indexable face mill and end mill
Performing square milling and side milling

Comparison of Accusize square shoulder inserts


	Carbide Inserts APKT1604 TiN Coated	Carbide Inserts APKT11T308 TiN Coated	APKT 160408 LH Carbide Insert, K10, Aluminum Cutting	APKT 11T308 LH Carbide Insert, K10, Aluminum Cutting	CARBIDE INSERTS APMT1604PDER-H2, Cutting Stainless Steel	CARBIDE INSERTS APMT1135PDER-M2, Cutting Stainless Steel
nose radius	1/32"	1/64"	1/32"	1/32"	1/32"	1/32"
coating	TiN	TiN			TiAlN	TiAlN
cutting aluminum			✓	✓
heavy duty					✓	✓
Tolerance of Cornerpoint	0.0005"	0.0005"	0.0005"	0.0005"	0.002"-0.005"	0.002"-0.005"
Inserts Code	APKT1604	APKT11T3	APKT160408	APKT11T308	APMT1604PDER-H2	APMT1135PDER-M2

Featured Accusize products using APMT1604PDER-H2 Carbide insets


4508-0018, 3" x 1" 90 Deg. Square Shoulder Indexable Face Mill with 7 ps APKT1604 Insert installed 90° cutting angle Radial rake angle: -10° Axial rake angle: +7° All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, case irons and aluminum alloys. Cutting Diameter: 3" Arbor Hole d: 1" Overall Length: 2.00" No. of Inserts: 7 SKU: 4508-0018	Accusize - 1" 90 Deg Square Shoulder Indexable End Mill w/APKT1604 Inserts, 0056-0921 90° Cutting angle Radial rake angle: -10° Axial rake angle: +7° All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys. Cutting Diameter D: 1" Shank diameter: 1" Over All Length: 3-3/4" No of Insert: 2 SKU: 0056-0921	2" x 6-1/8" 90 Degree R8 Shank Indexable End Mills with 5 APKT1604 carbide Inserts, 0028-6906 Comes with inserts installed. InsertS: APKT1604, TiN Coated. Positive rake 90°, right hand cut. Shank Size: R8. Overall Length: 6-1/8". Insert Style: APKT. Insert Size: 1604. Number of Flutes: 5. Cutting Angle: 90. Coolant Through: No SKU: 0028-6906

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Accusize Industrial Tools 10 Pcs Carbide Inserts Apmt1604pder-H2, Cutting Stainless Steel, Pvd Coated, 1056-1604

BEST SELLERS

Product introduction

Shipping Notices

Product Description

10 Pcs/Box Carbide Inserts APKT1604 TiN Coated, 0056-1604

TiAlN Coated, C5 coating grade
Perform heavy duty cutting, such as stainless steel.
Nose Angle: 85°
Relief Angle: 11°
Nose radius: 1/32"
Good for both finishing and roughing
Dual-edge
Used for indexable face mill and end mill
Performing square milling and side milling

Comparison of Accusize square shoulder inserts


	Carbide Inserts APKT1604 TiN Coated	Carbide Inserts APKT11T308 TiN Coated	APKT 160408 LH Carbide Insert, K10, Aluminum Cutting	APKT 11T308 LH Carbide Insert, K10, Aluminum Cutting	CARBIDE INSERTS APMT1604PDER-H2, Cutting Stainless Steel	CARBIDE INSERTS APMT1135PDER-M2, Cutting Stainless Steel
nose radius	1/32"	1/64"	1/32"	1/32"	1/32"	1/32"
coating	TiN	TiN			TiAlN	TiAlN
cutting aluminum			✓	✓
heavy duty					✓	✓
Tolerance of Cornerpoint	0.0005"	0.0005"	0.0005"	0.0005"	0.002"-0.005"	0.002"-0.005"
Inserts Code	APKT1604	APKT11T3	APKT160408	APKT11T308	APMT1604PDER-H2	APMT1135PDER-M2

Featured Accusize products using APMT1604PDER-H2 Carbide insets


4508-0018, 3" x 1" 90 Deg. Square Shoulder Indexable Face Mill with 7 ps APKT1604 Insert installed 90° cutting angle Radial rake angle: -10° Axial rake angle: +7° All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, case irons and aluminum alloys. Cutting Diameter: 3" Arbor Hole d: 1" Overall Length: 2.00" No. of Inserts: 7 SKU: 4508-0018	Accusize - 1" 90 Deg Square Shoulder Indexable End Mill w/APKT1604 Inserts, 0056-0921 90° Cutting angle Radial rake angle: -10° Axial rake angle: +7° All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys. Cutting Diameter D: 1" Shank diameter: 1" Over All Length: 3-3/4" No of Insert: 2 SKU: 0056-0921	2" x 6-1/8" 90 Degree R8 Shank Indexable End Mills with 5 APKT1604 carbide Inserts, 0028-6906 Comes with inserts installed. InsertS: APKT1604, TiN Coated. Positive rake 90°, right hand cut. Shank Size: R8. Overall Length: 6-1/8". Insert Style: APKT. Insert Size: 1604. Number of Flutes: 5. Cutting Angle: 90. Coolant Through: No SKU: 0028-6906

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.