Encoder Metal Gearmotor 24V DC Low Speed 80 RPM Gear Motor with Encoder for Arduino and 3D Printers

✔Product type: DC Gear motor with two-channel Hall effect encoder;Rated Voltage: 24V; No-Load Speed: 80RPM; No-Load Current: ≤ 0.12A;Rated Torque: 1.5kg.cm;

✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D); Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off;

✔Single Output 900 Pulses Per Revolution: Gear Reduction Ratio: 1/75, Each Loop Output Pulses: 12PPR 75*12=900PPR;

✔Wiring Diagram: Red - Motor power terminal (+);Black - Motor power terminal(-);Green - Quad encoder Ground;Blue - Quad encoder +5V Vcc;Yellow - Quad encoder A signal;White - Quad encoder B signal;

✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy.

Retail Price: $ 14.88

Wholesale Price: Inquire Now

Advantage:

High quality metal material, small size, high torque;
Excellent thermal conductivity, high hardness and anti-friction, very small sound;
High quality motor with a long lift about 1000 hours;
The new Hall encoder has a cover to prevent dust, durable and not easy to wear;

Characteristics:

The rear of the motor is equipped with a dual channel Holzer effect encoder, AB dual output, single circuit per cycle pulse 12PPR, double down the road, a total output of 48CPR. Phase difference 90 degrees.
The two-channel Hall effect encoder is used to sense the rotation of a magnetic disk on a rear protrusion of the motor shaft. The quadrature encoder provides a resolution of 48counts per revolution of the motor shaft.
To compute the counts per revolution of the gearbox output, multiply the gear ratio by 48.

Sweet tips:

1.Be sure to keep the wiring connection correct before Working;
2.Be sure to keep the motor stopped before change the CCW/CW direction; Or the motor will be burned!!!

Application:

Smart balance car, rc car model, robot;
smart home appliance,camera swing, tape machine;
Custom Servo, Arduino and 3D Printers,DIY Engine Toy;
electric toothbrush, medical equipment, laboratory equipment, etc.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Encoder Metal Gearmotor 24V DC Low Speed 80 RPM Gear Motor with Encoder for Arduino and 3D Printers

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Advantage:

High quality metal material, small size, high torque;
Excellent thermal conductivity, high hardness and anti-friction, very small sound;
High quality motor with a long lift about 1000 hours;
The new Hall encoder has a cover to prevent dust, durable and not easy to wear;

Characteristics:

The rear of the motor is equipped with a dual channel Holzer effect encoder, AB dual output, single circuit per cycle pulse 12PPR, double down the road, a total output of 48CPR. Phase difference 90 degrees.
The two-channel Hall effect encoder is used to sense the rotation of a magnetic disk on a rear protrusion of the motor shaft. The quadrature encoder provides a resolution of 48counts per revolution of the motor shaft.
To compute the counts per revolution of the gearbox output, multiply the gear ratio by 48.

Sweet tips:

1.Be sure to keep the wiring connection correct before Working;
2.Be sure to keep the motor stopped before change the CCW/CW direction; Or the motor will be burned!!!

Application:

Smart balance car, rc car model, robot;
smart home appliance,camera swing, tape machine;
Custom Servo, Arduino and 3D Printers,DIY Engine Toy;
electric toothbrush, medical equipment, laboratory equipment, etc.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.