Design Engineering 010099 Black 2" x 25' Exhaust Heat Wrap

Reduce under-hood temperatures a realistic 50%

Decreases exhaust density and increases exhaust flow

Improves horsepower

Added durability and heat retention - withstands 1200 degrees F direct / 2000 degrees F radiant

Only exhaust wrap with installation guide lines

size:

2" x 25'

color:

Black

Retail Price: $ 30.13

Wholesale Price: Inquire Now

Exhaust Heat Wrap

Note about Titanium Exhaust Systems:

DEI does NOT recommend wrapping Titanium exhausts. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. By wrapping the exhaust, the additional heat can make the titanium alloy turn brittle and prone to premature cracking. DEI recommends using alternatives such as their flexible heat shields.

Reduce under-hood temperatures a realistic 50%
Promotes increased flow for improved performance
Reduces temperature & vibration breakdown
Withstands 1200 degrees F direct / 2000 degrees F radiant


Calculate the Wrap Needed Prior to wrapping, consult the material chart to make sure you have enough wrap before you begin. Wrapping a pipe takes time and concentration. The tighter the wrap the better the hold and less chance of a loose or irregular fit. Consider anchoring one end of the wrap as it will aid in a much tighter wrap which results in better heat isolation.	Use a 1/4" Overlap Start wrapping the primary tube tightly at the exhaust port and secure it with a DEI Stainless Steel Locking Tie, hose clamp or safety wire. Testing has shown that utilizing a 1/4" overlap produces the best results without adversely affecting headers and tubing.	Secure the Ends Where primary tubes become closer together, wrap both pipes as one while using the same 1/4" overlap. Proceed to wrap the collector securing the ends with DEI Stainless Steel Locking Ties.


	Titanium Wrap	Traditional Wrap	EXO Series Wrap
Material	Basalt Fiber	Glass Fiber	304 Stainless Steel Wire Mesh over Glass Fiber
Direct Heat	Up to 1800 degrees F	Up to 1200 degrees F	Up to 1200 degrees F
Indirect Heat	Up to 2500 degrees F	Up to 2000 degrees F	Up to 2000 degrees F
Colors	Light Bronze/Brown, Black	Tan, Black	Tan, Black
Widths	1”, 2”, 6” (Black only available in 2”)	1”, 2”, 6”, 8”	1.5”

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Design Engineering 010099 Black 2" x 25' Exhaust Heat Wrap

BEST SELLERS

Product introduction

Shipping Notices

Improve performance with DEI Exhaust Wrap. Wrapping headers and down pipes is an important first step in controlling unwanted under-hood radiant heat. Keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density and increases exhaust flow. This improves exhaust scavenging resulting in cooler air intake temperatures for an improvement in performance and a gain in horsepower. Design Engineering stainless steel Locking Ties (sold separately) are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Design Engineering Hi-Temp Silicone Coating Spray (sold separately) is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping Titanium exhausts. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. By wrapping the exhaust, the additional heat can make the titanium alloy turn brittle and prone to premature cracking. DEI recommends using alternatives such as their flexible heat shields when seeking to reduce the heat on titanium exhaust systems.

From the manufacturer

Exhaust Heat Wrap

Note about Titanium Exhaust Systems:

Reduce under-hood temperatures a realistic 50%
Promotes increased flow for improved performance
Reduces temperature & vibration breakdown
Withstands 1200 degrees F direct / 2000 degrees F radiant


Calculate the Wrap Needed Prior to wrapping, consult the material chart to make sure you have enough wrap before you begin. Wrapping a pipe takes time and concentration. The tighter the wrap the better the hold and less chance of a loose or irregular fit. Consider anchoring one end of the wrap as it will aid in a much tighter wrap which results in better heat isolation.	Use a 1/4" Overlap Start wrapping the primary tube tightly at the exhaust port and secure it with a DEI Stainless Steel Locking Tie, hose clamp or safety wire. Testing has shown that utilizing a 1/4" overlap produces the best results without adversely affecting headers and tubing.	Secure the Ends Where primary tubes become closer together, wrap both pipes as one while using the same 1/4" overlap. Proceed to wrap the collector securing the ends with DEI Stainless Steel Locking Ties.


	Titanium Wrap	Traditional Wrap	EXO Series Wrap
Material	Basalt Fiber	Glass Fiber	304 Stainless Steel Wire Mesh over Glass Fiber
Direct Heat	Up to 1800 degrees F	Up to 1200 degrees F	Up to 1200 degrees F
Indirect Heat	Up to 2500 degrees F	Up to 2000 degrees F	Up to 2000 degrees F
Colors	Light Bronze/Brown, Black	Tan, Black	Tan, Black
Widths	1”, 2”, 6” (Black only available in 2”)	1”, 2”, 6”, 8”	1.5”

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.