Hygger Quiet Submersible and External 24V DC Water Pump, with Controller (30%-100% Settings), Powerful Return Pump for Fish Tanks, Aquariums, Ponds, Fountains, Sump, Hydroponics

🐠【Demension & Specifications】Input voltage: 100-240V 50/60HZ. Output voltage: DC 24V. Pump Dimension(LxWxH): 7.7 x 4.1 x 6.4 inch. Cord length from the pump to controller is 9ft, the power cord length is 9.9ft. Wattage/flow/head: 55W/1720GPH/14.8ft head. Please look to the size chart for other models

🐠【 Auto Shut Off When No Water】 Plug the power to turn this water pump on, unplug the power to turn it off. It is protected in case there's no water, the pump will auto shut off when no water is sensed or water gets too low. Comes with 2 kinds of removable water intake screens,1 for normal water level and the other for low water level (higher than 0.8inch)

🐠【Adjustable Flow Speed】This aquarium water pump has an external Led display controller, with 71 flow speed settings, you can control the flow rate from 30% to 100% of the top speed flow. 3 buttons on the controller: \"Up\" \"Down\" \"Pause\"

🐠【Internal & External Use】 Hygger dcp water pump can be ran externally or be submerged. Please note the controller is not waterproof, must be placed indoors.The water pump inlet and outlet ports with standar size threads, it comes with screws, o rings, pipe connection fittings.You can connect 1\", 3/4\", 1-1/2\", 1-1/4\" pipes to the pond pump

🐠【Durable Aquarium Water】Wear-resistant ceramic shaft and magnetic drive makes this water pump a long service life. No copper element, can be used for fresh water or salt water. We provide 12-month warranty for it. To get the warranty, just contact the seller directly about your issue

size:

55W, 1720GPH, 14.8ft

Retail Price: $ 109.99

Wholesale Price: Inquire Now

Hygger DCP controllable 24V quiet water pump, comes with a special U-shape water intake shell, which makes this return pump can be used in low water level. A powerful water pump for fish tanks, aquariums, ponds, fountains, waterfalls, sump, hydroponics, irrigation use, for fresh water and salt water.

2 kinds of water intake screens

Hygger water pump is different from others, because it comes with 2 kinds of removable water intake shells. It can be used in the lowest water level of 0.8 inch.

Aquarium Water Pump Other Features:

Ultra quiet, runs at low vibration.
Auto shut off when no water is sensed.
High performance, energy saving up to 65% and safe operation.
Can be used internally or externally, for salt-water or fresh water use.
Durable for long time use, with anti-resistant ceramic shaft, magnetic drive.
Easy to disassemble it by hand for cleaning, the impeller is removable.
With 71 settings external controller, easy to control the flow rate from 30% to 100%.


External Controller Adjustable water flow rate: 30% to 100% of the top speed. There are 3 buttons on it, 'down', "up", "pause". When press the pause button, default stop time is 10 minutes, to cancel it please press the "pause" button again. To lock your setting, long press the "pause" button for 3 seconds, after the LED flickering for 3 times, it's successfully locked. To cancel it please do the same operation again. The controller has memory function for the flow rater, if the power goes out the controller will go back to the last setting.	Attachments for small water pump The Large dimension 1350GPH, 1720GPH, 2120GPH, 2650GPH water pump comes with the following 14 attachments: 2 screw nuts: 2 pcs of 1-3/4". 2 O rings for sealing. 6 rigid pipe connections: 2 pcs of 3/4", 2 pcs of 1", 2 pcs of 1-1/4" 4 soft tube connections: 1 pcs of 3/4", 1 pcs of 1", 1 pcs of 1-1/4", 1 pcs of 1-1/2". The connections are made of ABS, you can use PVC, PE, PP pipes for this water pump.The small water pump is very compact, you can hold it by one hand.	Removable Impeller Hygger aquarium water pump is easy to be assembled and disassembled by hands, without using tools. You can look to the product image on the detail page to find the structural map. We use high performance and durable impeller, with ceramic shaft, magnetic drive, so this fish tank water pump has longer service life. The water pump will auto shut off when water level is too low, the impeller will stop working, want to restart the pump, please unplug the power and re-plug it.


Directions for use You need to connect the power cord and the pump cord to this controller. Turn on the pump by connecting to the power, turn off the pump by unplug the power. The pump will stop working when input voltage is too high, upon no water, impeller blocked, to restart the pump please re-plug the power. If you find the pump is failed to pump water at the beginning, please try to unplug and re-plug the power to get rid of the air inside the pump, repeat that for several times then the pump will work normally.	Use as internal submersible water pump Max working water depth for this water pump is 5ft. Please check and clean the pump regularly. Prohibit to use the pump in flammable liquids. Working water temps: 34-95 Fahrenheit degrees. When use the pump internally, please keep the pump fully submersible in water before plug in power. Place the controller indoors. Please use one of the 2 removable shells to prevent pump blocking.	Use as external/inline water pump Don’t let the pump run dry, it will damage the motor. When use the pump externally, make sure there are full of water in the pump body and the pipes before plug in power. Please tighten all nuts and connections to make sure no water will leak out, or you can use extra glue to reinforce the connection. Please note the controller must be placed indoors, it's not waterproof. Place the pump at lower position than the water level.

Error codes & solutions:

Er01: abnormal working current, please check line to the pump or the controller for short circuit.
Er02: controller overheat, please place the controller in a cool place, avoid exposure or high temperature.
Er03: pump running dry, please check if the water line is too low to fully submerge the water intake.
Er04: propeller get stuck, please check whether there are stuffs blocked the propeller or wiring errors.
Er05: abnormal input voltage, please check the power voltage is 100-240V 50/60HZ.

If you find the "Up", "Down", "Pause"button on the controller are failed to operation, you may have locked the controller accidently, in this case, you need to long press the "Pause"button for 3 seconds to unlock the controller.

On the other hand, to lock the controller, please long press the "Pause"button for 3 seconds.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Hygger Quiet Submersible and External 24V DC Water Pump, with Controller (30%-100% Settings), Powerful Return Pump for Fish Tanks, Aquariums, Ponds, Fountains, Sump, Hydroponics

BEST SELLERS

Product introduction

Shipping Notices

Product Description

2 kinds of water intake screens

Hygger water pump is different from others, because it comes with 2 kinds of removable water intake shells. It can be used in the lowest water level of 0.8 inch.

Aquarium Water Pump Other Features:

Ultra quiet, runs at low vibration.
Auto shut off when no water is sensed.
High performance, energy saving up to 65% and safe operation.
Can be used internally or externally, for salt-water or fresh water use.
Durable for long time use, with anti-resistant ceramic shaft, magnetic drive.
Easy to disassemble it by hand for cleaning, the impeller is removable.
With 71 settings external controller, easy to control the flow rate from 30% to 100%.


External Controller Adjustable water flow rate: 30% to 100% of the top speed. There are 3 buttons on it, 'down', "up", "pause". When press the pause button, default stop time is 10 minutes, to cancel it please press the "pause" button again. To lock your setting, long press the "pause" button for 3 seconds, after the LED flickering for 3 times, it's successfully locked. To cancel it please do the same operation again. The controller has memory function for the flow rater, if the power goes out the controller will go back to the last setting.	Attachments for small water pump The Large dimension 1350GPH, 1720GPH, 2120GPH, 2650GPH water pump comes with the following 14 attachments: 2 screw nuts: 2 pcs of 1-3/4". 2 O rings for sealing. 6 rigid pipe connections: 2 pcs of 3/4", 2 pcs of 1", 2 pcs of 1-1/4" 4 soft tube connections: 1 pcs of 3/4", 1 pcs of 1", 1 pcs of 1-1/4", 1 pcs of 1-1/2". The connections are made of ABS, you can use PVC, PE, PP pipes for this water pump.The small water pump is very compact, you can hold it by one hand.	Removable Impeller Hygger aquarium water pump is easy to be assembled and disassembled by hands, without using tools. You can look to the product image on the detail page to find the structural map. We use high performance and durable impeller, with ceramic shaft, magnetic drive, so this fish tank water pump has longer service life. The water pump will auto shut off when water level is too low, the impeller will stop working, want to restart the pump, please unplug the power and re-plug it.


Directions for use You need to connect the power cord and the pump cord to this controller. Turn on the pump by connecting to the power, turn off the pump by unplug the power. The pump will stop working when input voltage is too high, upon no water, impeller blocked, to restart the pump please re-plug the power. If you find the pump is failed to pump water at the beginning, please try to unplug and re-plug the power to get rid of the air inside the pump, repeat that for several times then the pump will work normally.	Use as internal submersible water pump Max working water depth for this water pump is 5ft. Please check and clean the pump regularly. Prohibit to use the pump in flammable liquids. Working water temps: 34-95 Fahrenheit degrees. When use the pump internally, please keep the pump fully submersible in water before plug in power. Place the controller indoors. Please use one of the 2 removable shells to prevent pump blocking.	Use as external/inline water pump Don’t let the pump run dry, it will damage the motor. When use the pump externally, make sure there are full of water in the pump body and the pipes before plug in power. Please tighten all nuts and connections to make sure no water will leak out, or you can use extra glue to reinforce the connection. Please note the controller must be placed indoors, it's not waterproof. Place the pump at lower position than the water level.

Error codes & solutions:

Er01: abnormal working current, please check line to the pump or the controller for short circuit.
Er02: controller overheat, please place the controller in a cool place, avoid exposure or high temperature.
Er03: pump running dry, please check if the water line is too low to fully submerge the water intake.
Er04: propeller get stuck, please check whether there are stuffs blocked the propeller or wiring errors.
Er05: abnormal input voltage, please check the power voltage is 100-240V 50/60HZ.

On the other hand, to lock the controller, please long press the "Pause"button for 3 seconds.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.