DCT Heavy-Duty Live Tailstock Wood Lathe Center, no. 1MT – Woodworking Tapered Turn Center, Pen Making, Bowl Turning

SMOOTH, EFFECTIVE TURNING: Use this well-balanced center to support your work at the tailstock end of your lathe when turning wood workpieces such as bowls and pens; 60-degree pointed tapered end relieves tension at end of your workpiece or sanding the bottom of the piece; Precise ball bearing design allows for smooth turning and offers chisel more range of motion

EASY TO USE: Place rear taper end on the tail stock and the opposite end in the center drill hole; We recommend applying lubrication oil to bearing prior to each use (not included)

#1MT SIZE: Arbor works with any unit that has a #1 morse taper (1MT) tail stock; Check your machine’s user manual for the tail stock taper size to know if 1MT is the correct size for your application

BUILT TO LAST: Alloy steel shaft construction for ultimate strength and longevity that can easily handle a maximum 4,000 RPM and maximum 66-pound workpiece load

PROTECT & STORE CENTER: Comes in a transparent 4.5” x 1.5” x 1.5” inch (11.4cm x 3.8cm x 3.8cm) two-piece clear plastic protective covering case to ensure safety when not in use

Retail Price: $ 17.99

Wholesale Price: Inquire Now

DCT Heavy-Duty Live Tailstock

Support your work at the tailstock end of your lathe when turning bowls and pens with this DCT Heavy-Duty Live Tailstock.


SMOOTH TURNING The 60-degree pointed tapered end relieves tension, and the precise ball bearing design allows for smooth turning and offers more range of motion. The arbor works with any unit that has a #1 morse taper (1MT) tail stock. Check your machine’s user manual for the tail stock taper size to know if 2MT is the correct size for your application (using a center that is too small can be accommodated by using sleeves, but using a center that is too large can damage your workpiece).	EASY TO USE Place rear taper end on the tail stock and the opposite end in the center drill hole; We recommend applying lubrication oil to bearing prior to each use (not included).	SUPPORT YOUR WORK Use this well-balanced center to support your work at the tailstock end of your lathe when turning wood workpieces such as bowls and pens. It comes packed inside a two-piece clear plastic protective covering case to ensure safety when not in use.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

DCT Heavy-Duty Live Tailstock Wood Lathe Center, no. 1MT – Woodworking Tapered Turn Center, Pen Making, Bowl Turning

BEST SELLERS

Product introduction

Shipping Notices

Product Description

DCT Heavy-Duty Live Tailstock

Support your work at the tailstock end of your lathe when turning bowls and pens with this DCT Heavy-Duty Live Tailstock.


SMOOTH TURNING The 60-degree pointed tapered end relieves tension, and the precise ball bearing design allows for smooth turning and offers more range of motion. The arbor works with any unit that has a #1 morse taper (1MT) tail stock. Check your machine’s user manual for the tail stock taper size to know if 2MT is the correct size for your application (using a center that is too small can be accommodated by using sleeves, but using a center that is too large can damage your workpiece).	EASY TO USE Place rear taper end on the tail stock and the opposite end in the center drill hole; We recommend applying lubrication oil to bearing prior to each use (not included).	SUPPORT YOUR WORK Use this well-balanced center to support your work at the tailstock end of your lathe when turning wood workpieces such as bowls and pens. It comes packed inside a two-piece clear plastic protective covering case to ensure safety when not in use.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.