Bull Ring 1001 for 2007 to 2021 Silverado Sierra and 2015 to 21 Colorado and Canyon Retractable Truck Bed Tie Downs Side Wall Anchors 1 Pair

Install in any of 9 holes - 3 down each side and 3 across the front, with a Phillips screwdriver and no special tools.

Retractable Stainless Ring extends and locks out at a35 degree up angle to match the direction of cargo load straps or ropes

Stores flush and out of the way when not in use.

Retractable Truck Bed Tie Down easy access location and cargo control across the front of the bed

Stands up to the toughest weather with a lifetime warranty

Retail Price: $ 26.75

Wholesale Price: Inquire Now

BULL RING 1001 Silverado & Sierra (2007-2021) Colorado & Canyon (2015-21)

Bull Ring 1001 models fit the oval holes on the sidewall and front wall of 2007-2020 Chevy Silverado / GMC Sierra

And also fit perfectly in 2015-2021 Chevy Colorado / 2015-2021 GMC Canyon.

Sidewall mount Bull Rings mount just below the truck rail and allow the user up to 9 tie down points in the truck bed.
Rated at 1,000 lbs., the bullet lifts up and out at a 35° angle to match the angle used when securing loads with ratchets or rope.
Installation couldn’t be easier.
They’re specifically designed for your truck bed and require no drilling, no special tools and no hassles.

Installation

remove screw from part
insert base into hole with ring angled upward
lift until ring is at the top of the hole
push bottom of stainless backing plate into hole
lower slowly and ease the rest of backing plate into the opening
pull outward as you slide black plastic cover plate to wall
insert screw and pull outward on ring while turning screw
just before snug, position part in hole
snug a 1/4 turn past stop
do not over tighten

Where are the Bull Rings for the Top Rail ? Why Can't I Find any ?

The 1001 gives you more places to secure a load than any other truck.

Why Can't I find any Bull Rings for my Top Rail? Don't you have any ?

Sorry, but no. The rear stake pocket is trapezoid shaped, and that is because it is designed to be a hand-grip and there is a corresponding step in the rear bumper for climbing on to the truck bed. We don’t want to cover a handgrip. In any case, the walls are flush (like an elevator shaft) and won’t accept a Bull Ring.

The front holes are covered by the plastic rail cap, but we don’t recommend cutting them open. There is no repair for a cut rail cap, and the stake pocket holes underneath also have flush walls which don’t accept a standard Bull Ring installation.

But we made your truck Better ! You have 9 choices and they are all up by the rail - so you can tie or strap easily and you don't have to get your shirt dirty- or climb in to use them.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Bull Ring 1001 for 2007 to 2021 Silverado Sierra and 2015 to 21 Colorado and Canyon Retractable Truck Bed Tie Downs Side Wall Anchors 1 Pair

BEST SELLERS

Product introduction

Shipping Notices

Fits Sierra ; Silverado 2007-2019; 2015-19 Canyon/Colorado. Sidewall mount Bull Rings mount just below the truck rail and allow the user up to 9 tie down points in the truck bed. Rated at 1,000 lbs., the bullet lifts up and out at a 35° angle to match the angle used when securing loads with ratchets or rope. Installation couldn't be easier. They're specifically designed for your truck bed and require no drilling, no special tools and no hassles. If your plan is to order 4-1/2 pair to utilize all 9 available mounting locations, order our item #1019 and get the 9th unit free.

Product Description

BULL RING 1001 Silverado & Sierra (2007-2021) Colorado & Canyon (2015-21)

Bull Ring 1001 models fit the oval holes on the sidewall and front wall of 2007-2020 Chevy Silverado / GMC Sierra

And also fit perfectly in 2015-2021 Chevy Colorado / 2015-2021 GMC Canyon.

Sidewall mount Bull Rings mount just below the truck rail and allow the user up to 9 tie down points in the truck bed.
Rated at 1,000 lbs., the bullet lifts up and out at a 35° angle to match the angle used when securing loads with ratchets or rope.
Installation couldn’t be easier.
They’re specifically designed for your truck bed and require no drilling, no special tools and no hassles.

Installation

remove screw from part
insert base into hole with ring angled upward
lift until ring is at the top of the hole
push bottom of stainless backing plate into hole
lower slowly and ease the rest of backing plate into the opening
pull outward as you slide black plastic cover plate to wall
insert screw and pull outward on ring while turning screw
just before snug, position part in hole
snug a 1/4 turn past stop
do not over tighten

Where are the Bull Rings for the Top Rail ? Why Can't I Find any ?

The 1001 gives you more places to secure a load than any other truck.

Why Can't I find any Bull Rings for my Top Rail? Don't you have any ?

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.