- polyester 90%/ EPE 10%
- Made in the USA and Imported
- Wire tracer locates and traces energized and non-energized wires, breakers, coaxial cables, and telephone wires to identify shorts, ground faults, and broken wires
- Manual adjustment from energized to non-energized systems
- Five different sensitivity levels for flexibility of use
- Compatible with 0 to 300V AC or DC
- Receiver range from 1 to 3 feet from cable being traced
- Trace energized lines up to 300VAC or VDC
- Trace unenergized and open conductors
- Identifies breakers and fuses without powering down
- Identifies wires in a bundle
- Identifies control, alarm and telephone system wiring
The Amprobe AT-1000 Wire Tracer is made in the United States of America
Safety Certification:
All Amprobe tools, including the Amprobe AT-1000, are rigorously tested for safety, accuracy, reliability, and ruggedness in our state-of-the-art test lab. In addition, Amprobe products that measure electricity are listed by a 3rd party safety lab, either UL or CSA. This system assures that Amprobe products meet or exceed safety regulations and will perform in a tough, professional environment for many years to come.
Amprobe AT-1000 Wire Tracer
Designed for light commercial/residential applications
The Amprobe AT-1000 Advanced Wire Tracer is compact and easy to use for tracing energized and non-energized wires, breakers, coaxial cables, and telephone wires to identify and pinpoint shorts, breakers, open conductors, and fuses from up to 3’ (.91 m) away. The tracer allows the user to manually select current (energized) or open (non-energized) systems.
Five different sensitivity levels allow for use on different types of systems. The tracer is compatible with 0 to 300 volt alternating current (AC) or direct current (DC) circuits. The receiver detects a transmitted signal one to three feet from the cable being traced. The receiver indicates signal strength with a series of colored LED lights. The transmitter and receiver are each powered by one 9 volt battery. Circuit breaker tracers identify and locate the correct circuit breaker for a particular electrical outlet. The tracers usually include a transmitter, which plugs into the outlet that is being tested, and a receiver, which is a handheld device used to identify the proper circuit breaker in the fuse box. The correct circuit breaker is indicated by LED lights. These tracers may have automatic or manual sensitivity adjustment for use on different kinds of circuits.
Key Features
|
|
|
|
|
|---|---|---|---|
Variety of TracingTraces de-energized lines, open conductors and energized lines up to 300V AC/DC. Locates shorts and identifies breakers and fuses without powering down. |
Receiver Range up to 3'The Amprobe AT-1000 offers a receiver range up to 3' (1 m) from a cable being traced. |
Identify Cables Individually or in a BundleIdentifies targeted control, alarm, and telephone system cables individually or in a bundle. |
What's in the box?AT-1000 Wire Tracer. (1) Transmitter. (1) Receiver. (1) Set connection cables. (2) 9V batteries (installed) User Manual. |
Amprobe builds rugged, reliable test and measurement tools
Our products have been trusted by professional electricians and HVAC technicians for over 65 years and range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. Rugged built electrical test tools with verified quality and safety, Amprobe offers practical, reliable tools at a fair price. Over the last six decades Amprobe has become a leading manufacturer of safe, reliable electrical test tools for industrial, commercial and residential applications with over 500 products worldwide. Amprobe not only invented the first clamp meter and the first wire tracer, but has also been consistently first to market with innovative solutions to better meet the needs of our professional customers. All Amprobe tools undergo rigorous testing to ensure quality and full compliance with the latest IEC and CE safety regulations in our state of the art environmental and safety testing labs and are further listed with third party certification labs.
Our commitment to high-quality products and customer service is demonstrated by our industry exclusive 'No Hassle' warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot.
|
|
|---|---|
| Amprobe AT-1000 Wire Tracer | |
| Trace energized lines up to 300 V ac/dc | 100 V g 300 V ac (X1000 Transmitter) |
| Range: up to 3’ (1 m) from a cable being traced | R1000 Receiver |
| Operating frequency | 17kHz |
| Operating temperature | 0°F to 120°F (-18°C to 49°C) |
| Storage temperature | -40°F to 150°F (-40°C to 66°C) |
BEST SELLERS
From the manufacturer
The Amprobe AT-1000 Wire Tracer is made in the United States of America
Safety Certification:
All Amprobe tools, including the Amprobe AT-1000, are rigorously tested for safety, accuracy, reliability, and ruggedness in our state-of-the-art test lab. In addition, Amprobe products that measure electricity are listed by a 3rd party safety lab, either UL or CSA. This system assures that Amprobe products meet or exceed safety regulations and will perform in a tough, professional environment for many years to come.
Amprobe AT-1000 Wire Tracer
Designed for light commercial/residential applications
The Amprobe AT-1000 Advanced Wire Tracer is compact and easy to use for tracing energized and non-energized wires, breakers, coaxial cables, and telephone wires to identify and pinpoint shorts, breakers, open conductors, and fuses from up to 3’ (.91 m) away. The tracer allows the user to manually select current (energized) or open (non-energized) systems.
Five different sensitivity levels allow for use on different types of systems. The tracer is compatible with 0 to 300 volt alternating current (AC) or direct current (DC) circuits. The receiver detects a transmitted signal one to three feet from the cable being traced. The receiver indicates signal strength with a series of colored LED lights. The transmitter and receiver are each powered by one 9 volt battery. Circuit breaker tracers identify and locate the correct circuit breaker for a particular electrical outlet. The tracers usually include a transmitter, which plugs into the outlet that is being tested, and a receiver, which is a handheld device used to identify the proper circuit breaker in the fuse box. The correct circuit breaker is indicated by LED lights. These tracers may have automatic or manual sensitivity adjustment for use on different kinds of circuits.
Key Features
|
|
|
|
|
|---|---|---|---|
Variety of TracingTraces de-energized lines, open conductors and energized lines up to 300V AC/DC. Locates shorts and identifies breakers and fuses without powering down. |
Receiver Range up to 3'The Amprobe AT-1000 offers a receiver range up to 3' (1 m) from a cable being traced. |
Identify Cables Individually or in a BundleIdentifies targeted control, alarm, and telephone system cables individually or in a bundle. |
What's in the box?AT-1000 Wire Tracer. (1) Transmitter. (1) Receiver. (1) Set connection cables. (2) 9V batteries (installed) User Manual. |
Amprobe builds rugged, reliable test and measurement tools
Our products have been trusted by professional electricians and HVAC technicians for over 65 years and range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. Rugged built electrical test tools with verified quality and safety, Amprobe offers practical, reliable tools at a fair price. Over the last six decades Amprobe has become a leading manufacturer of safe, reliable electrical test tools for industrial, commercial and residential applications with over 500 products worldwide. Amprobe not only invented the first clamp meter and the first wire tracer, but has also been consistently first to market with innovative solutions to better meet the needs of our professional customers. All Amprobe tools undergo rigorous testing to ensure quality and full compliance with the latest IEC and CE safety regulations in our state of the art environmental and safety testing labs and are further listed with third party certification labs.
Our commitment to high-quality products and customer service is demonstrated by our industry exclusive 'No Hassle' warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot.
|
|
|
|---|---|
| Amprobe AT-1000 Wire Tracer | |
| Trace energized lines up to 300 V ac/dc | 100 V g 300 V ac (X1000 Transmitter) |
| Range: up to 3’ (1 m) from a cable being traced | R1000 Receiver |
| Operating frequency | 17kHz |
| Operating temperature | 0°F to 120°F (-18°C to 49°C) |
| Storage temperature | -40°F to 150°F (-40°C to 66°C) |
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
