--For simple installation about splicing, you can refer to our video and photo tutorials.
--Easy to install firmly, let’s see how to make it, Check below please :
Below that are some considerations:
1.The bathtub must be clean, without any dirt, smudges, oils. Do not use mat on a textured surface since suction cups will not hold properly as mentioned in description
2.Before filling the tub and start the shower, moisten the tub with a little bit of water and aim at the center mat with suction cups on underside carefully
3.Press the bath mat with your hands to adsorb it on the smooth bathtub.
4.Make sure it was adsorbed at least 8-10 places for vacuum adsorption properly
5.The bathmat would be immovable when the Installation finished, Repeat the instructions above or press on each suction cup one by one please if the mat still moved.
6.Rinse the mat every time you used, Machine-wash available, hang to air dry, do not use a dryer or radiator
WARNING !!! To prevent falling, Make sure the sucker is immovable before use every time, Do not use mat on a textured surface since suction cups will not hold properly, The bathtub must be clean, without any dirt, smudges, oils. Do not use bath oils and jump on the bath mat, This is the high road to be slipped.