Monstrum Precision Picatinny Scope Rings | 30 mm Diameter

0.85 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount

30 mm diameter rings for mounting standard 30 mm rifle scope tubes

Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts

Uses hardened steel Torx mounting hardware to prevent stripping of the bolts

Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch

Retail Price: $ 15.95

Wholesale Price: Inquire Now

MONSTRUM-TACTICAL-OPTICS-SCOPES-MOUNTS-ACCESSORIES


Crafted with Rigorous Specifications Line up your shot at the exact height you want it with the Monstrum Tactical Precision Scope Rings! Each set of scope rings is precision crafted to a given height specification. Choose the height that matches your particular rifle setup and preferred cheek weld. Your shot is lined up just where you want it every time.	Made for 30mm Scope Tubes 30mm in diameter, the rings are built for use with standard 30 millimeter scope tubes. The base is compatible with all Picatinny or Weaver mounting systems. The torx locking screw system allows for quick yet powerful tightening while protecting from the screws from stripping.	Heat Treated Locking Mechanism Mount your scope quickly and securely with our thumb locking nuts. These nuts can be tightened by hand or by torque wrench and allows one to quickly switch optics when desired. The rings are crafted from lightweight 6061 grade aluminum, with a heavy duty steel mounting mechanism for extreme tolerance.

Ring Length:	0.65 in
Ring Width:	1.25 in
Weight:	1.50-1.85 oz (each)
Material:	6061 Aircraft Grade Aluminum

Finish:	Black
Anodization:	Type-III Hard Anodization
Rail Type:	Picatinny


	1in Precision Scope Rings	30mm Precision Scope Rings	30mm Q-Series Quick Release Scope Rings	1in Q-Series Quick Release Scope Rings
Weight:	1.40-1.50 oz each	1.50-1.85 oz each	1.60-1.80 oz each	1.60-1.80 oz each
6061 Aircraft Grade Aluminum:	✓	✓	✓	✓
Hardened Steel Hardware:	✓	✓	✓	✓
Thumb Screws:			✓	✓
Square Integral Recoil Stops:	✓	✓	✓	✓
Centerline Heights:	0.80", 1.00"	0.85", 1.00", 1.20", 1.35"	0.80", 1.00", 1.25"	0.80", 1.00", 1.25"
Quick Release:			✓	✓
Finish:	Type-III Anodized Black	Type-III Anodized Black	Standard Black, Flat Dark Earth	Standard Black, Flat Dark Earth

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Monstrum Precision Picatinny Scope Rings | 30 mm Diameter

BEST SELLERS

Product introduction

Shipping Notices

Line up your shot at the exact height you want it with the Monstrum Tactical Precision Scope Rings! Each set of scope rings is precision crafted to a given height specification. Choose the height that matches your particular rifle setup and preferred cheek weld. Your shot is lined up just where you want it every time. Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch. Height is measured from the center of the rifle scope tube to the bottom plane of the Picatinny mount. 30 mm in diameter, the rings are built for use with standard 30 millimeter scope tubes. The Picatinny base is compatible with all Picatinny mounting systems. It is not compatible with Weaver mounts. The torx locking screw system allows for quick yet powerful tightening while protecting from the screws from stripping. The rings are crafted from lightweight 6061 grade aluminum, with a heavy duty steel mounting mechanism for extreme tolerance. All Monstrum rings and mounts include a lifetime guarantee.

Product Description


Crafted with Rigorous Specifications Line up your shot at the exact height you want it with the Monstrum Tactical Precision Scope Rings! Each set of scope rings is precision crafted to a given height specification. Choose the height that matches your particular rifle setup and preferred cheek weld. Your shot is lined up just where you want it every time.	Made for 30mm Scope Tubes 30mm in diameter, the rings are built for use with standard 30 millimeter scope tubes. The base is compatible with all Picatinny or Weaver mounting systems. The torx locking screw system allows for quick yet powerful tightening while protecting from the screws from stripping.	Heat Treated Locking Mechanism Mount your scope quickly and securely with our thumb locking nuts. These nuts can be tightened by hand or by torque wrench and allows one to quickly switch optics when desired. The rings are crafted from lightweight 6061 grade aluminum, with a heavy duty steel mounting mechanism for extreme tolerance.

Ring Length:	0.65 in
Ring Width:	1.25 in
Weight:	1.50-1.85 oz (each)
Material:	6061 Aircraft Grade Aluminum

Finish:	Black
Anodization:	Type-III Hard Anodization
Rail Type:	Picatinny


	1in Precision Scope Rings	30mm Precision Scope Rings	30mm Q-Series Quick Release Scope Rings	1in Q-Series Quick Release Scope Rings
Weight:	1.40-1.50 oz each	1.50-1.85 oz each	1.60-1.80 oz each	1.60-1.80 oz each
6061 Aircraft Grade Aluminum:	✓	✓	✓	✓
Hardened Steel Hardware:	✓	✓	✓	✓
Thumb Screws:			✓	✓
Square Integral Recoil Stops:	✓	✓	✓	✓
Centerline Heights:	0.80", 1.00"	0.85", 1.00", 1.20", 1.35"	0.80", 1.00", 1.25"	0.80", 1.00", 1.25"
Quick Release:			✓	✓
Finish:	Type-III Anodized Black	Type-III Anodized Black	Standard Black, Flat Dark Earth	Standard Black, Flat Dark Earth

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.