Material: Silicone
Food Grade. Food and Non Food material should use separately.
Wash and boil before use, especially for food.
Easy to use mold very flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc. Can be used within the temperature between -40~220 centigrade.
Some material ( such as clay, paste etc. ) may extend a bit when pull out of the mold.
All molds are reusable.
More Tips to use with Epoxy Resin:
1) poured in silicone molds in layers, allowing air bubbles completely escape;
2) to expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mold, filled with resin in the oven.
3) follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard.
4) do not use water-base ink for resin casting.
5) After baking clay / resin in complex or deep molds remove the finished product under running water with soap.
6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.
Note: the largest mold is designed to be pre-cut. You may glue it before molding to avoid leakage.