GECKO All for making life better
Quick steps to start the fog machine with LED lights
1. After unpacking the box, unscrew and remove the cap at the top of the tank.
2. Fill the tank with a water-based fog fluid(normally 1 part fog luiquide and 5 parts water).
3. Screw the cap back onto the top of the tank so it is secure.
4. connect the wireless remote receiver to the machine(at back of the machine)
5. Connect fog machine to a power outlet.
6. On the rear panel, set the Power Switch to the On position. The fog machine will begin warming up.
7. Normally it takes about 4 minutes to warm up(the remote receiver will alarm once when ready). then the machine is ready to work.
Power Adapter: US Plug Notes
●Fog fluide is not included.
●The fog machine is designed for indoor use and is not waterproof.
●Keep away from children and NO direct eye contact to the laser lights.
●The fog machine will be shortened its life if it keeps running for a long time, you are suggested to switch off for 15 mins when it runs for 6 hours.
● Please comply with the user manual during using.
●When the power is on, all the lights will be lit to create a brilliant stage for you.
Fog machine x 1
Wireless Remote Control x 1
Power Adapter x 1
User Manual (English) x 1