Industrial Strength Foam Cushion Insert to Lift Sagging Sofa Seat. Flexible, Customizable, Cut to Size, Firm Support for Couch, Chair or Loveseat Extends Furniture Life, Fixes Comfort and Appearance.

size:

One Insert: Severe Large (1”)x20”x27”

Retail Price: $ 36.99

Wholesale Price: Inquire Now

Follow 3 Easy Steps and Watch Video (before you order) to enjoy restored COMFORT and SUPPORT.

SagsAway DIY solution inserts inside your zippered cover. This is all about compressing your weakened Foam (not down) to extend the life of your cushion.

Laying it under the cushion is a mistake, results won’t last. Cannot work on weak or broken springs as it will just sink again.

Following the 3 steps is critical before you order. Your measurements indicate if this can help your situation. Try One and TEST RESULTS. One insert restores (1) cushion.

The 3 Steps


1) Measure for size (Regular) 20" x 18" or (Large) 20" x 27" The size of the cushion area where you actually sit determines the SIZE of the insert needed. Choose the one that is closest to your cushion size, regular or large. Customize for any size cushion once you see if this is a viable solution for you.	2) Measure cushion height with no one sitting. You will compare this measurement to your sag depth measurement to determine your remaining foam thickness. You must follow the 3 steps to see if you have at least 2" of remaining thickness. If less than 2” your best option is to buy new cushion cores or repair a weak spring deck.	3) Measure cushion sag depth while sitting. How far down does it sag? This will determine which insert thickness you need. Example with a 6" cushion: less than a 3" sag use 1" Severe. Sags 3" to 4" use 1.5" Extreme.

We Understand the Problem!

IT’S SIMPLE if you follow the 3 Steps! We are the people who manufacture this product and have dealt with this issue in the furniture industry for decades, and know how to help you delay buying new furniture.

sagging cushion, sag cushion, sagging couch, sagging couch cushion, no sags

Customizable

This goes inside your zippered cushion cover to compress your remaining foam firmness. Customize for any size or shape cushion. Results are the same regardless of how many pieces you use for cushion coverage.

This military grade foam is easy to cut and modify to fit your cushions. Use a sharp knife and good scissors.
Top example, we use a Large 20″ x 27″ insert and cut off 2″. Used the 2″ to fill-in for more cushion coverage.
Bottom example, we cut a Regular (18″ x 20″) insert in half, resulting in two 9″ x 20″ pieces.
For two 24″ x 36″ cushions you would need (2) Large size and (1) Regular size insert.

Before You Buy

Watch video and follow the 3 steps:

You must have zippered cushion covers. This only works by inserting inside your zippered cushion cover. Any positive results will not last if you simply lay it under your cushion.
You must have foam cushions. This cannot work with down cushions. This product works by compressing your remaining foam density for a firmer seat.
Try one insert and test results first. Return within 30 days less return shipping.
Understand that your cushions will continue to sag over time. This is a cost-effective alternative to replacing your cushion cores to extend the life of your cushions and help delay buying new furniture.

How We're Different

While this material may look like common polystyrene foam, it is NOT. It is chemically different and used in industrial applications to provide long term durability with the ideal cushioning characteristics needed for inserting inside your cushion cover.

This is a patented DIY solution to firm-up the foam inside your sagging cushions. You get the material, instructions and our technical support. 80% of those who try this are successful and can delay buying new furniture. Made in USA, No Sags Inc

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Industrial Strength Foam Cushion Insert to Lift Sagging Sofa Seat. Flexible, Customizable, Cut to Size, Firm Support for Couch, Chair or Loveseat Extends Furniture Life, Fixes Comfort and Appearance.

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Follow 3 Easy Steps and Watch Video (before you order) to enjoy restored COMFORT and SUPPORT.

SagsAway DIY solution inserts inside your zippered cover. This is all about compressing your weakened Foam (not down) to extend the life of your cushion.

Laying it under the cushion is a mistake, results won’t last. Cannot work on weak or broken springs as it will just sink again.

Following the 3 steps is critical before you order. Your measurements indicate if this can help your situation. Try One and TEST RESULTS. One insert restores (1) cushion.

The 3 Steps


1) Measure for size (Regular) 20" x 18" or (Large) 20" x 27" The size of the cushion area where you actually sit determines the SIZE of the insert needed. Choose the one that is closest to your cushion size, regular or large. Customize for any size cushion once you see if this is a viable solution for you.	2) Measure cushion height with no one sitting. You will compare this measurement to your sag depth measurement to determine your remaining foam thickness. You must follow the 3 steps to see if you have at least 2" of remaining thickness. If less than 2” your best option is to buy new cushion cores or repair a weak spring deck.	3) Measure cushion sag depth while sitting. How far down does it sag? This will determine which insert thickness you need. Example with a 6" cushion: less than a 3" sag use 1" Severe. Sags 3" to 4" use 1.5" Extreme.

We Understand the Problem!

Customizable

This military grade foam is easy to cut and modify to fit your cushions. Use a sharp knife and good scissors.
Top example, we use a Large 20″ x 27″ insert and cut off 2″. Used the 2″ to fill-in for more cushion coverage.
Bottom example, we cut a Regular (18″ x 20″) insert in half, resulting in two 9″ x 20″ pieces.
For two 24″ x 36″ cushions you would need (2) Large size and (1) Regular size insert.

Before You Buy

Watch video and follow the 3 steps:

You must have zippered cushion covers. This only works by inserting inside your zippered cushion cover. Any positive results will not last if you simply lay it under your cushion.
You must have foam cushions. This cannot work with down cushions. This product works by compressing your remaining foam density for a firmer seat.
Try one insert and test results first. Return within 30 days less return shipping.
Understand that your cushions will continue to sag over time. This is a cost-effective alternative to replacing your cushion cores to extend the life of your cushions and help delay buying new furniture.

How We're Different

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.