Installation:
Tools that need to be prepared in advance: ruler and scissor.
Step 1: Clean the window frame, and wait until the cleaned areas completely dry.
Step 2: Measure and record the size of the window with a ruler.
Step 3: Mark the appripriate size you need on the window covering film according to the measured window frame size.Cut off the excess film(Please add an extra 1 inch to dimensions)
Step 4: Attach the loop tape(widen one) to the four sides of the window heat film(Please don't stick to the edge and keep a distance of 1 inch)
Step 5: Apply hook tape(narrow one) around middle side of the window frame.
Step 6: Peel off the white backing paper of loop tape, press film in place on tape at top of window, then sides and bottom.