LONYE 250W Base Gear & Blade Gear Replacement Part for Magic Bullet Blender MB1001(Set of 2)

💙Package includes 2 pcs 250W Base Gear + 2 pcs 250W Blade Gear

💙It is made to fit for Original Magic Bullet blenders only, NOT fit for any nutribullet blender

💙Size: approximately 4mm diameter internal screw hole.

💙2 gears for the Motor base and 2 Gears for under the blade. Blade is NOT included.

💙Notice: Please check the model before order to avoid buying the wrong part.

Retail Price: $ 7.59

Wholesale Price: Inquire Now

Description:

The part is a food processing device that performs tasks such as blending frozen drinks, making pasta sauce, chopping fruits & vegetables or grinding coffee beans. It is designed to handle hard-to-chop foods, but after long periods of use, the motor in the base gear can wear out.

Instruction:

Check the inside of the blade on the gear or the gear on the bottom of this base, if that is worn out, you just need to replace it.

How to replace the 250w blender base gear:


Step 1: prepare tools prepare a dish tower/rag/paper tower, basic flat pliers, and flat-head screwdriver(flat & narrow)	Step 2: hold the blades using the towel, take the gear on the back end, take the pliers to grip down on the gear using even solid pressure, turn the gear clockwise, it will loosen up, and see the little screws.	Step 3: Grab the towel to hold the blades again, screw the good gear in going counterclockwise, take the pliers to make the gear clamp down tightly.	Step 4: Take out of the base and plastic part using the flat-head screwdriver through the little notch on the bottom


Step 5: Put the screwdriver into the notch, grab the pliers slide the base in, take the base clockwise out and you will see the thread right. Notice: When you move the screwdriver, the gear will move meanwhile.	Step 6: Change the good base grab the pliers on one side, tighten the base counterclockwise using the pliers to bite down.	Step 7: when the blade gear & rubber gear is installed well,the blender will be in good condition.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

LONYE 250W Base Gear & Blade Gear Replacement Part for Magic Bullet Blender MB1001(Set of 2)

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Description:

Instruction:

Check the inside of the blade on the gear or the gear on the bottom of this base, if that is worn out, you just need to replace it.

How to replace the 250w blender base gear:


Step 1: prepare tools prepare a dish tower/rag/paper tower, basic flat pliers, and flat-head screwdriver(flat & narrow)	Step 2: hold the blades using the towel, take the gear on the back end, take the pliers to grip down on the gear using even solid pressure, turn the gear clockwise, it will loosen up, and see the little screws.	Step 3: Grab the towel to hold the blades again, screw the good gear in going counterclockwise, take the pliers to make the gear clamp down tightly.	Step 4: Take out of the base and plastic part using the flat-head screwdriver through the little notch on the bottom


Step 5: Put the screwdriver into the notch, grab the pliers slide the base in, take the base clockwise out and you will see the thread right. Notice: When you move the screwdriver, the gear will move meanwhile.	Step 6: Change the good base grab the pliers on one side, tighten the base counterclockwise using the pliers to bite down.	Step 7: when the blade gear & rubber gear is installed well,the blender will be in good condition.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.