BAOSHISHAN 50ml Stainless Steel Hydrothermal Synthesis Autoclave Reactor Digestion High-Pressure Tank with PTFE Lining/PTFE Lined for Rapid Digestion of Insoluble Material in 180℃ 2MPa(Customizable)
Hydro-thermal Synthesis Reactor is a closed vessel, capable of decomposing insoluble substances. It can be used for sample dissolution pre-treatment in analysis like atomic absorption spectroscopy and plasma emission.also, it can be used for synthesis of small doses. Achieving the purpose of rapid digestion of insoluble substances by taking advantage of strong acid/alkali, high temperature and pressure confined environment available. It's helpful in dissolving samples in the determination of trace elements.
Suggested Heater: It is recommended use a heater with programmed heating, muffle furnace is not recommended, becasue of temperature overshooting and temperature heating rate exceed the limit will lead to melting of the lining.
Pour the reactant into the PTFE liner and ensure that the feeding is less than 80%, and for the first time must less than 30%
Install the kettle body correctly and tighten the kettle cover with the booster rod.
Place the synthetic reactor in the heater and raise the temperature to the required temperature ( less than the prescribed safe temperature )
At the end of the reaction, the cooling rate should be ≤ 5c/min strictly in order to avoid damaging the reactor.
After confirming the temperature in the kettle is lower than the boiling point of the solvent in the reactant, loosen the cover of the kettle by a booster rod, and then open the cover of the kettle.
B00LQ1GUBU
PPL Liner
What is PPL?Para polyphenylene, high temperature resistance, good thermal stability, excellent self lubrication performance.
Limitations: can not be used as reaction container for strong acid and strong base
The liner can only match the corresponding capacity reactor kettle
What is PTFE?Poly tetra fluoroethylene,polymer compound made from tetrafluoroethylene, which has excellent chemical stability and corrosion resistance, is one of the best materials for corrosion resistance in the world.
No poison - Physical inert
Non adhesion - the smallest surface tension in solid materials
High lubrication - the lowest coefficient of friction in solid materials
High temperature and low temperature resistance - the working temperature can reach 250 degrees centigrade, even if the temperature drops to -196 C, it can maintain 5% elongation
Corrosion resistance - almost insoluble in all solvents
7.Maximum pressure: 20Mpa ; Maximum temperature: 500C ; Features: 316 Stainless Steel Lining (can be replaced with PTFE lining), Flanged interface, explosion-proof ; Size:25ml,50ml,100ml,200ml,300ml,500ml
8. Max Working temperature: 280℃ ; Maximum Working pressure: 10MPa (gauge) ; Features:Magnetic stirring,Flanged interface, explosion-proof ; Size: 150ml, can be customized according to your needs.
BAOSHISHAN 50ml Stainless Steel Hydrothermal Synthesis Autoclave Reactor Digestion High-Pressure Tank with PTFE Lining/PTFE Lined for Rapid Digestion of Insoluble Material in 180℃ 2MPa(Customizable)
BAOSHISHAN 50ml Stainless Steel Hydrothermal Synthesis Autoclave Reactor Digestion High-Pressure Tank with PTFE Lining/PTFE Lined for Rapid Digestion of Insoluble Material in 180℃ 2MPa(Customizable)
Hydro-thermal Synthesis Reactor is a closed vessel, capable of decomposing insoluble substances. It can be used for sample dissolution pre-treatment in analysis like atomic absorption spectroscopy and plasma emission.also, it can be used for synthesis of small doses. Achieving the purpose of rapid digestion of insoluble substances by taking advantage of strong acid/alkali, high temperature and pressure confined environment available. It's helpful in dissolving samples in the determination of trace elements.
Suggested Heater: It is recommended use a heater with programmed heating, muffle furnace is not recommended, becasue of temperature overshooting and temperature heating rate exceed the limit will lead to melting of the lining.
Pour the reactant into the PTFE liner and ensure that the feeding is less than 80%, and for the first time must less than 30%
Install the kettle body correctly and tighten the kettle cover with the booster rod.
Place the synthetic reactor in the heater and raise the temperature to the required temperature ( less than the prescribed safe temperature )
At the end of the reaction, the cooling rate should be ≤ 5c/min strictly in order to avoid damaging the reactor.
After confirming the temperature in the kettle is lower than the boiling point of the solvent in the reactant, loosen the cover of the kettle by a booster rod, and then open the cover of the kettle.
B00LQ1GUBU
PPL Liner
What is PPL?Para polyphenylene, high temperature resistance, good thermal stability, excellent self lubrication performance.
Limitations: can not be used as reaction container for strong acid and strong base
The liner can only match the corresponding capacity reactor kettle
What is PTFE?Poly tetra fluoroethylene,polymer compound made from tetrafluoroethylene, which has excellent chemical stability and corrosion resistance, is one of the best materials for corrosion resistance in the world.
No poison - Physical inert
Non adhesion - the smallest surface tension in solid materials
High lubrication - the lowest coefficient of friction in solid materials
High temperature and low temperature resistance - the working temperature can reach 250 degrees centigrade, even if the temperature drops to -196 C, it can maintain 5% elongation
Corrosion resistance - almost insoluble in all solvents
7.Maximum pressure: 20Mpa ; Maximum temperature: 500C ; Features: 316 Stainless Steel Lining (can be replaced with PTFE lining), Flanged interface, explosion-proof ; Size:25ml,50ml,100ml,200ml,300ml,500ml
8. Max Working temperature: 280℃ ; Maximum Working pressure: 10MPa (gauge) ; Features:Magnetic stirring,Flanged interface, explosion-proof ; Size: 150ml, can be customized according to your needs.
Heating and magnetic stirring, surface temperature up to 380 C
Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.