Unisource 6TSC Gray PTFE Braided Hose Assembly, 3/8" 303 Stainless Steel JIC Female Connection, 2500 PSI Maximum Pressure, 48" Length, 3/8" ID

Flexible pigtail hose assembly for chemical or gas transfer operations

Nonconductive smooth-bore PTFE tube for resistance to chemicals and high temperatures

Single-braid 300 series stainless steel reinforcement cover for strength

Temperature range of -65 to +450 degrees F

Two 3/8\" factory-installed stainless steel female JIC fittings

number:

item:

48 Inches

connector:

303 Stainless Steel Jic Female

outside:

0.445 Inches

maximum:

4 Unknown modifier

inside:

3/8 Inches

Retail Price: $ 63.68

Wholesale Price: Inquire Now

All Category
All Category

Women's Clothings

Men's Clothings

Unisource 6TSC Gray PTFE Braided Hose Assembly, 3/8" 303 Stainless Steel JIC Female Connection, 2500 PSI Maximum Pressure, 48" Length, 3/8" ID

BEST SELLERS

Product introduction

Shipping Notices

This Unisource 6TSC gray PTFE braided hose assembly has a 3/8" ID and is suitable for chemical or gas transfer operations. It is constructed with a nonconductive smooth-bore PTFE (polytetrafluorethylene) tube for resistance to chemicals and high temperatures, and a cover reinforced with a single braid of 300 series stainless steel for a maximum pressure rating of 2,500 pounds per square inch (psi). This hose exceeds Compressed Gas Association (CGA) Standard E.9 for flexible, PTFE-lined pigtail hoses for compressed gas service, and has a minimum burst pressure rating four times that of its maximum working pressure rating, also known as a 4:1 safety factor. It can withstand temperatures ranging from -65 to +450 degrees F, and comes equipped with two 3/8" factory-installed 303 stainless steel female Joint Industry Council (JIC) fittings. This hose assembly is suitable for a wide variety of commercial and industrial applications, including automotive, gas conveyance, food processing, pharmaceutical, chemical transfer, or other applications where the chemical and heat requirements exceed the protections offered by rubber, metal, or plastic hose.

Industrial hoses transfer or convey air or liquid in hose systems. When selecting industrial hoses, use the STAMPED method:

S = Size (ID, OD, and length)

T = Temperature (maximum and minimum temperatures of material being transported)

A = Application (industry or process)

M = Material (to be conveyed, type and concentration)

P = Pressure (maximum working pressure)

E = Ends (type of end connectors or couplings on hose)

D = Delivery method (volume and velocity)

The inside diameter of the hose must be adequate to keep pressure loss to a minimum and avoid damage to the hose due to heat generation or excessive turbulence. The hose must be capable of withstanding the minimum and maximum temperatures that occur within the hose system. Some applications require specialized oils or chemicals to be conveyed through the system. In this case, hose selection must ensure compatibility of the hose tube, cover, couplings and O-rings with the fluid used. Industrial hoses are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.

Unisource manufactures industrial, hydraulic, and sanitary hoses as well as expansion joints and braided connectors. The company, founded in 1980, is headquartered in Portland, OR.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy