Streamlight 69889 TLR-1 HL Dual Remote Kit with Tail Cap Switch, Remote Pressure Switch, Standard Door Switch, Lithium Batteries and Mounting Clips, Black
Streamlight 69889 TLR-1 HL Gun Light With Dual Remote Kit - Black
PRODUCT SPECIFICATIONS:
Lightweight and compact
Includes keys for Glock-style, Picatinny, Beretta 90two, S&W 99 and S&W TSW and Sig P320
Fits existing light bearing holsters
Rail clamp designed to rapidly attach/detach from side of weapon
Mounts directly to handguns with Glock-style rails and to all MIL-STD-1913 rails
Powered by two CR123A lithium batteries (included)
SUPER BRIGHT TACTICAL WEAPON LIGHT
The TLR-1 HL is a high lumen lithium battery powered Gun-Mounted Tactical Light featuring shock-proof high power LED technology and providing 1.5 hours of continuous run time.
Tethered battery door and latch mechanism prevents battery door loss while providing easy battery replacement. Rail clamp system securely attaches/detaches quickly and safely with no tools and without putting your hands in front of the muzzle. When enabled, strobe activated on two or more momentary paddle hits.
Dual Remote Kit Includes:
TLR-1 HL with Safe Off Tail switch, Dual Remote Pressure Switch, (2) Mounting Clips, 3.75" Adhesive pad, (2 each) 11"; 8" and 4" Cable Ties, and Instructions.
LIGHT SOURCE: High power LED, white, impervious to shock.
LIGHT OUTPUT: 1,000 lumens, 20,000 candela peak beam intensity, 283 meter beam distance, 1.5 hour run time.
User programmable strobe can be enabled/disabled. TIR optic produces a concentrated beam with optimum peripheral illumination. Optimized electronics provide regulated intensity.
TLR Compatibility List: The recommendations listed apply to full-size weapons unless otherwise noted.
BERETTA: Cx4 Storm (carbine/rifle) – TLR fits with 1913 key. Px4 Storm (Pistol) - TLR fits with standard key. NOTE: M lights are VERY loose. Vertec - New polymer key – 1913 Older aluminum key – GL (Standard).
CZ: P-01 - Should work with GL (Standard) key. (Not tested; based on similar European version)
FN: 5.7 (with Picatinny style rail) -1913 key.
GLOCK: Any with rails – GL (Standard) key Cannot fit Glocks that ARE NOT equipped with factory rails. After installing a contour remote on a TLR-2 equipped Glock it will likely be necessary to rezero the laser.
HK:USP (full size) uses our HK adapter 69085 with a GL (Standard) key. The (compact) uses our HK adapter 69091 with a GL (Standard) key. HK P2000 is supposed to have Picatinny rail. (NOT CHECKED) HK P30 -1913 key. NOTE: The rail tilts down slightly from the bore. This may result in laser zeroing difficulty closer than 50 feet (depending on the tolerances of the pistol and laser).
SIG SAUER:GSR or 1911 Style with flat bottom rail - Picatinny key. ANY ALUMINUM FRAME SIG WITH A ROUND BOTTOM RAIL: Including the P220R, P229R, etc. The Sig round bottom rail departs from the true shape of both the 1913 and Universal standards and may cause an improper fit. The TLR will work with the 1913 key but THERE WILL BE DAMAGE to the finish of both the gun and the light. The retaining screw must be TIGHT. Newer Sig P series guns are supposed to have a true Picatinny rail. This has not been verified by Streamlight. SP2022 - Polymer frame. Same comments as for aluminum frames, EXCEPT that the polymer frame is a little thicker and does not show marks from a clamp because it is molded from black material. PER SIG, the TLR with the 1913 key works.
SMITH & WESSON: On the TSW and 99 models, the slot is too far back for the standard key and requires the special S&W key. There are many different models of TSW, but as long as it's a TSW WITH A RAIL, it uses the S&W key. Smith & Wesson M&P autoloader takes the Picatinny key. SIGMA – Cannot fit.
SPRINGFIELD ARMORY:Operator (1911 with rail) – Picatinny key. XD (4 & 5 inch barrels) – GL (Standard) key. Cannot fit 3” barrel.
WALTHER:99 - New (2004 models) FULL SIZE ones are nearly the same as the S&W 99 and use the S&W key. Older ones (no slot across the rail and the side grooves CLOSED in front) cannot be fitted with a TLR. 99 Compact – Cannot fit. Rail is too short. P22 – Cannot fit. Non-standard rail.
TLR Compatibility List Keys
GL (Standard)
Fit Glock or “universal” rails. These have a cross slot about 5/32” wide.
1913 (MIL-STD-1913 “Picatinny”) AND 1913
The 1913 key is wider than the standard key because the slots are nominally .206” wide. (A little more than 3/16”) The standard key will work with a Picatinny rail but the light will move back and forth with recoil unless the clamp is very tight. Some guns with a Picatinny rail still need a standard key depending on the construction of the actual rail. These will be identified for the individual guns when we test them.
SMITH & WESSON AND TSW/99
Keys have the bar extended farther back than the other keys. They are for rails having a non-standard (too short) distance between the slot and the trigger guard.
BERETTA 90two
Looks like it has a Picatinny rail but dimensions are different. Use the 90two key for the TLR. Note: M-lights should not be used on the 90two and will fall off under recoil.
Streamlight 69889 TLR-1 HL Dual Remote Kit with Tail Cap Switch, Remote Pressure Switch, Standard Door Switch, Lithium Batteries and Mounting Clips, Black
Streamlight 69889 TLR-1 HL Dual Remote Kit with Tail Cap Switch, Remote Pressure Switch, Standard Door Switch, Lithium Batteries and Mounting Clips, Black
The TLR-1 HL provides an 1, 000 lumen blast of light for maximum illumination while clearing a room or searching an alley. Its wide beam pattern lights up large areas so you can identify who or what is nearby. 6000 Series machined aircraft aluminum with black anodized finish. High impact, chemically resistant engineering polymer laser housing. High temperature, shock mounted, impact resistant Borofloat glass lens; gasket sealed. One handed snap-on/tighten interface keeps hands away from muzzle when attaching/detaching. IPX7 rated design; waterproof to 1 meter for 30 minutes. It meets applicable European Community Directives. Dimensions: length: 3. 39-Inch (8. 61 cm); width: 1. 47-Inch (3. 73 cm); height: 1. 44-Inch (3. 65 cm).
From the manufacturer
Streamlight 69889 TLR-1 HL Gun Light With Dual Remote Kit - Black
PRODUCT SPECIFICATIONS:
Lightweight and compact
Includes keys for Glock-style, Picatinny, Beretta 90two, S&W 99 and S&W TSW and Sig P320
Fits existing light bearing holsters
Rail clamp designed to rapidly attach/detach from side of weapon
Mounts directly to handguns with Glock-style rails and to all MIL-STD-1913 rails
Powered by two CR123A lithium batteries (included)
SUPER BRIGHT TACTICAL WEAPON LIGHT
The TLR-1 HL is a high lumen lithium battery powered Gun-Mounted Tactical Light featuring shock-proof high power LED technology and providing 1.5 hours of continuous run time.
Tethered battery door and latch mechanism prevents battery door loss while providing easy battery replacement. Rail clamp system securely attaches/detaches quickly and safely with no tools and without putting your hands in front of the muzzle. When enabled, strobe activated on two or more momentary paddle hits.
Dual Remote Kit Includes:
TLR-1 HL with Safe Off Tail switch, Dual Remote Pressure Switch, (2) Mounting Clips, 3.75" Adhesive pad, (2 each) 11"; 8" and 4" Cable Ties, and Instructions.
LIGHT SOURCE: High power LED, white, impervious to shock.
LIGHT OUTPUT: 1,000 lumens, 20,000 candela peak beam intensity, 283 meter beam distance, 1.5 hour run time.
User programmable strobe can be enabled/disabled. TIR optic produces a concentrated beam with optimum peripheral illumination. Optimized electronics provide regulated intensity.
TLR Compatibility List: The recommendations listed apply to full-size weapons unless otherwise noted.
BERETTA: Cx4 Storm (carbine/rifle) – TLR fits with 1913 key. Px4 Storm (Pistol) - TLR fits with standard key. NOTE: M lights are VERY loose. Vertec - New polymer key – 1913 Older aluminum key – GL (Standard).
CZ: P-01 - Should work with GL (Standard) key. (Not tested; based on similar European version)
FN: 5.7 (with Picatinny style rail) -1913 key.
GLOCK: Any with rails – GL (Standard) key Cannot fit Glocks that ARE NOT equipped with factory rails. After installing a contour remote on a TLR-2 equipped Glock it will likely be necessary to rezero the laser.
HK:USP (full size) uses our HK adapter 69085 with a GL (Standard) key. The (compact) uses our HK adapter 69091 with a GL (Standard) key. HK P2000 is supposed to have Picatinny rail. (NOT CHECKED) HK P30 -1913 key. NOTE: The rail tilts down slightly from the bore. This may result in laser zeroing difficulty closer than 50 feet (depending on the tolerances of the pistol and laser).
SIG SAUER:GSR or 1911 Style with flat bottom rail - Picatinny key. ANY ALUMINUM FRAME SIG WITH A ROUND BOTTOM RAIL: Including the P220R, P229R, etc. The Sig round bottom rail departs from the true shape of both the 1913 and Universal standards and may cause an improper fit. The TLR will work with the 1913 key but THERE WILL BE DAMAGE to the finish of both the gun and the light. The retaining screw must be TIGHT. Newer Sig P series guns are supposed to have a true Picatinny rail. This has not been verified by Streamlight. SP2022 - Polymer frame. Same comments as for aluminum frames, EXCEPT that the polymer frame is a little thicker and does not show marks from a clamp because it is molded from black material. PER SIG, the TLR with the 1913 key works.
SMITH & WESSON: On the TSW and 99 models, the slot is too far back for the standard key and requires the special S&W key. There are many different models of TSW, but as long as it's a TSW WITH A RAIL, it uses the S&W key. Smith & Wesson M&P autoloader takes the Picatinny key. SIGMA – Cannot fit.
SPRINGFIELD ARMORY:Operator (1911 with rail) – Picatinny key. XD (4 & 5 inch barrels) – GL (Standard) key. Cannot fit 3” barrel.
WALTHER:99 - New (2004 models) FULL SIZE ones are nearly the same as the S&W 99 and use the S&W key. Older ones (no slot across the rail and the side grooves CLOSED in front) cannot be fitted with a TLR. 99 Compact – Cannot fit. Rail is too short. P22 – Cannot fit. Non-standard rail.
TLR Compatibility List Keys
GL (Standard)
Fit Glock or “universal” rails. These have a cross slot about 5/32” wide.
1913 (MIL-STD-1913 “Picatinny”) AND 1913
The 1913 key is wider than the standard key because the slots are nominally .206” wide. (A little more than 3/16”) The standard key will work with a Picatinny rail but the light will move back and forth with recoil unless the clamp is very tight. Some guns with a Picatinny rail still need a standard key depending on the construction of the actual rail. These will be identified for the individual guns when we test them.
SMITH & WESSON AND TSW/99
Keys have the bar extended farther back than the other keys. They are for rails having a non-standard (too short) distance between the slot and the trigger guard.
BERETTA 90two
Looks like it has a Picatinny rail but dimensions are different. Use the 90two key for the TLR. Note: M-lights should not be used on the 90two and will fall off under recoil.
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.